|
Originally Posted by kgombe
(Post 10268093)
don't forget theta no good front bearing... if i was him i would give it away... TO ME... to much stress to for him to handle
|
Originally Posted by Lille-bror
(Post 10268166)
You bumder...! :lol:
:D:D:sneaky: |
nova pluss3.5?????
after break-in i was getting 11.5 to 12min of runtime. now after 6 gallons or so its now runnin 9 to 10 min a tank. i have changed the front barring and played with the tuning on my carb. i loaned the motor to a friend for a race. i am thinking he may have ran my motor hot. it started loosing run time after he used it. down to 7 minutes or so per tank. i pulled the button off and the o ring was stuck i cleaned the button and put it all back together. its now picked back up to the 9 or so minutes runtime.
do yall think i should get another head button for it? thanks |
Originally Posted by pancanman
(Post 10268449)
after break-in i was getting 11.5 to 12min of runtime. now after 6 gallons or so its now runnin 9 to 10 min a tank. i have changed the front barring and played with the tuning on my carb. i loaned the motor to a friend for a race. i am thinking he may have ran my motor hot. it started loosing run time after he used it. down to 7 minutes or so per tank. i pulled the button off and the o ring was stuck i cleaned the button and put it all back together. its now picked back up to the 9 or so minutes runtime.
do yall think i should get another head button for it? thanks |
Originally Posted by pancanman
(Post 10268449)
after break-in i was getting 11.5 to 12min of runtime. now after 6 gallons or so its now runnin 9 to 10 min a tank. i have changed the front barring and played with the tuning on my carb. i loaned the motor to a friend for a race. i am thinking he may have ran my motor hot. it started loosing run time after he used it. down to 7 minutes or so per tank. i pulled the button off and the o ring was stuck i cleaned the button and put it all back together. its now picked back up to the 9 or so minutes runtime.
do yall think i should get another head button for it? thanks |
Originally Posted by RCmayor
(Post 10268489)
Loaning an engine to a friend is like loaning your wife to a friend. She's never the same when you get her back. lol
|
I ran a Nitrotec R21 and a RE10 pipe for about 7 gallons last season and loved it but went ahead a got a BTTA for this year. Anyway my question is have any of you racers ran the Losi RE10 with your BTT or other similar mill? I am trying to save a little money and stick with the Losi pipe which is similar to the 9901 and 2060 I think. Thanks for any info!
|
Originally Posted by savannahmick
(Post 10268622)
I ran a Nitrotec R21 and a RE10 pipe for about 7 gallons last season and loved it but went ahead a got a BTTA for this year. Anyway my question is have any of you racers ran the Losi RE10 with your BTT or other similar mill? I am trying to save a little money and stick with the Losi pipe which is similar to the 9901 and 2060 I think. Thanks for any info!
if you are happy with the RE10 on your nitrotec it will run similar on your plus 4 i would still recommend a 9901ss/41021 or 2096ss/41021 :nod: the guy with runtime issues , usually when an engine loses its compression seal and starts to get some blowby occuring you start to richen the engine on both lsn and hsn (putting more oil/fuel mix in the chamber to compensate for looseness) but mainly lsn so you lose a tremendous amount of runtime by doing so and risk of flameouts increases dramatically resize from Rayaracing.com = goodness :nod: Ray does phenomenal work and theres tooling in his shop that is not sold to others by way of purchasing his own brand (yes he is "THE MAN") of resizing equipment ;) |
Originally Posted by scrapsz
(Post 10267299)
I recall seeing Novarossi Rex 3 port engines with a metal shielded front bearing a few years back that were marketed as 'rally' engines in Europe and Australia. This could be one of those engines.
|
Originally Posted by RCmayor
(Post 10267742)
Damn Turbo, where'd you find that dinosaur at?
|
Originally Posted by RCmayor
(Post 10268489)
Loaning an engine to a friend is like loaning your wife to a friend. She's never the same when you get her back. lol
|
Originally Posted by scrapsz
(Post 10269110)
Huh...so THAT's why she's been so freaking strange lately. :eek:
Those girls :lol: |
yeah always heard that if you loan your car or girl to a friend he is gonna throw a rod in both of them.
|
Originally Posted by pancanman
(Post 10269564)
yeah always heard that if you loan your car or girl to a friend he is gonna throw a rod in both of them.
|
Originally Posted by pancanman
(Post 10269564)
yeah always heard that if you loan your car or girl to a friend he is gonna throw a rod in both of them.
|
| All times are GMT -7. It is currently 12:28 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.