EB Mods JS Engine
12-14-2010 | 08:09 AM
#1445
Tech Addict
Joined: Aug 2003
Posts: 526
From: PA
Stock JS .21 vs Stock JS .23
Both Using:
Dynamite 086 Pipe
EBMods 30%
OS P5 Plug
Best Averaged Runs on the Same Day Testing
http://ebmods.com/JS%2023%20vs%20JS%2021.JPG
Please keep one thing in mind, I go to the extreme to keep my Dyno calibrated to the Data Analyzer used to collect the Dyno Data ( www.performancetrends.com ), this is way more accurate then the "eyeball" calibration method used by some. I have personally spoke to a few Dyno owners who use that method, and it's a little disappointing to hear
,,,, But when doing comparison runs on the Same Dyno it really doesn't matter what the numbers read, but more so the difference in the "before" and "after" graphs. Considering the same testing protocol and testing equipment was used the difference in percentages will remain the same.
Both Using:
Dynamite 086 Pipe
EBMods 30%
OS P5 Plug
Best Averaged Runs on the Same Day Testing
http://ebmods.com/JS%2023%20vs%20JS%2021.JPG
Please keep one thing in mind, I go to the extreme to keep my Dyno calibrated to the Data Analyzer used to collect the Dyno Data ( www.performancetrends.com ), this is way more accurate then the "eyeball" calibration method used by some. I have personally spoke to a few Dyno owners who use that method, and it's a little disappointing to hear
,,,, But when doing comparison runs on the Same Dyno it really doesn't matter what the numbers read, but more so the difference in the "before" and "after" graphs. Considering the same testing protocol and testing equipment was used the difference in percentages will remain the same.
12-14-2010 | 09:09 AM
#1446
Stock JS .21 vs Stock JS .23
Both Using:
Dynamite 086 Pipe
EBMods 30%
OS P5 Plug
Best Averaged Runs on the Same Day Testing
http://ebmods.com/JS%2023%20vs%20JS%2021.JPG
Please keep one thing in mind, I go to the extreme to keep my Dyno calibrated to the Data Analyzer used to collect the Dyno Data ( www.performancetrends.com ), this is way more accurate then the "eyeball" calibration method used by some. I have personally spoke to a few Dyno owners who use that method, and it's a little disappointing to hear ,,,, But when doing comparison runs on the Same Dyno it really doesn't matter what the numbers read, but more so the difference in the "before" and "after" graphs. Considering the same testing protocol and testing equipment was used the difference in percentages will remain the same.
Both Using:
Dynamite 086 Pipe
EBMods 30%
OS P5 Plug
Best Averaged Runs on the Same Day Testing
http://ebmods.com/JS%2023%20vs%20JS%2021.JPG
Please keep one thing in mind, I go to the extreme to keep my Dyno calibrated to the Data Analyzer used to collect the Dyno Data ( www.performancetrends.com ), this is way more accurate then the "eyeball" calibration method used by some. I have personally spoke to a few Dyno owners who use that method, and it's a little disappointing to hear
,,,, But when doing comparison runs on the Same Dyno it really doesn't matter what the numbers read, but more so the difference in the "before" and "after" graphs. Considering the same testing protocol and testing equipment was used the difference in percentages will remain the same.
12-16-2010 | 06:32 AM
#1448
Tech Addict
Joined: Aug 2003
Posts: 526
From: PA
12-16-2010 | 07:07 AM
#1450
I was probably the first to look at this post.I don't know who your assuming de-rated your thread just make sure you have me scratched off the list!
12-16-2010 | 07:10 AM
#1451
Tech Addict
Joined: Aug 2003
Posts: 526
From: PA
Um I noticed that the Poll questions always let you see who voted for what. Why isn't the Star Rating the same?
It would be nice to see who is rating who. It would even help show a persons true character if that person repsented another company who voted on a thread for the soul purpose to hurt that rating..
It would be nice to see who is rating who. It would even help show a persons true character if that person repsented another company who voted on a thread for the soul purpose to hurt that rating..
12-16-2010 | 07:12 AM
#1452
Tech Addict
Joined: Aug 2003
Posts: 526
From: PA
12-16-2010 | 07:22 AM
#1454
Tech Addict
Joined: Aug 2003
Posts: 526
From: PA
12-16-2010 | 07:31 AM
#1455