Binding
 

I had that problem with my losi. Turned out that when you have the clinch bolt loose and your setting your carb, make sure that your servo linkage is pulling the slide directly toward the servo, rather than off to the side which would cause your binding! That turned out to be my problem:nod:

Hey Joe good to see your still around! Congrats on your move. Ges I won't see you at any races anymore, unless your still gona do the Motorama race.:tire: Have fun in Cali. Wish I was there!:cry:

Just got back from raceworlds first point series race. I was able to run a 10 min pit and allowed me to slip into second place. I was able to stay there till the end. The js .23 ran great and got great fuel milage.

Jdub

Hey Joe,

Called the number you gave me and it went to your business. Left messsage. Could you get ahold of me? 574-780-2490

Thanks man,

Randy

Matt, I just received your email from RCT and replied, sorry for the delay.

In the future anyone who needs to contact me for Customer Service please email me direct at [email protected] or call the shop,, please try not to send emails through RCT, as I don't always receive them. Direct is always the best solution.

Congrats to Joe Alessi of Lucky7 RC and EBMods for making the move out West leaving all of us to freeze are arse's off in the Northeast.....

I'm ready to jump on a plane now and fly out.. :)

Hey Randy could you call me today please, Joe's on West Coast time,,,, oh wait even when he was on the East Coast he was still on West Coast time... :) 570-779-0646

Didn't see this,, hahahaha,,,

Don't get to relaxed today, that truck should be showing up with those 3 skids to unload and inventory :)

Ok, the Full Mod .23's are now shipping, Absolute Hobbyz should have some listed and AMain should have them up soon.

FM .23's don't have the bored and filled cranks, but instead they come with a Tungsten Weighted counter balance. We tested the light balance crank verse the heavy balance crank and found the heavy balance crank produces 20% more torque on the bottom over the light balanced crank. And after talking with the Team guys who tested them on the track, they all preferred the feel of the heavy balanced crank over the light balance.

js clutches and flywheel
 

Well i got race again this weekend. The .23 ran great and i used the js twister clutch shoes and js flywheel. I was able to pit at 10min easy. The clutch I ran for practice and all 3 quals and 20 min main. The clutch shoes should go a gallon easy and i was happy with the way the performed. I used 1.0 springs. I would recomend these clutches to anyone they are affordablea and reliable.

Thanks Ed and Joe

Jdub

Hey Ed any chance you'll be attending Motorama?... I am confirmed for Expert Nitro and Electric 1/8th... awaiting the packet in the mail. Working on Midwest.:tire:

Dad or myself will give you a call here soon. Sounds like Joe's gonna be busy setting up shop.

Also have my eye on the FM .23 for Truggy next season, Good info!!!

Hey Gary, yes plan to be at Motorama to race personally and Display EBMods, JS Racing and Lucky7 RC products.

New Engine Bearing Tool.

....

Great to hear that you'll be racing too. I'll give a call soon, as we have just moved also, (still in w. pa) and are in the process of setting up new email accounts.

Very nice addition!!!