R/C Tech Forums

Go Back  R/C Tech Forums > General Forums > Nitro Off-Road > Offroad Nitro Engine Forum
EB Mods JS Engine >

EB Mods JS Engine

Register
FAQ
Social Groups
Wiki Posts
Calendar
Search
Today's Posts
Mark Forums Read
Vendor Directory

EB Mods JS Engine

   
Old 01-20-2010 | 10:59 AM
  #151  
moosemachine
Tech Initiate
iTrader: (1)
 
Joined: Oct 2009
Posts: 22
Default 25% vs 30% nitro?
Hi,

Does any of you guys know whether there's anything I should be particularly aware of running 25% nitro instead of 30%?

Adjustments, anything?

Thanks alot.

Nb. Just received mine today. Absolutely beautiful

Nbb. Thank you absolutehobbyz.com, for outstanding service.
moosemachine is offline  
Reply
Old 01-20-2010 | 06:20 PM
  #152  
jbright33's Avatar
jbright33
Tech Master
iTrader: (15)
 
Joined: Dec 2008
Posts: 1,352
From: shamokin pa
Default
what one did u get?
jbright33 is offline  
Reply
Old 01-21-2010 | 06:41 AM
  #153  
khaliffen
Tech Initiate
 
Joined: Apr 2008
Posts: 30
From: Denmark
Default
Originally Posted by jbright33
what one did u get?
It's the fully modded on he got, and so did I.
khaliffen is offline  
Reply
Old 01-21-2010 | 08:35 PM
  #154  
Radical Freaks's Avatar
Radical Freaks
Tech Master
iTrader: (7)
 
Joined: Jul 2007
Posts: 1,929
From: Malaysia
Default
Originally Posted by MUGENRC
I´m intersted in the engines too for me( my son) and to sell them here in Portugal

Victor
JMAmodelismo-Portugal
Me too......to sell in Malaysia......im sure it will be HOT!!
Radical Freaks is offline  
Reply
Old 01-21-2010 | 08:49 PM
  #155  
jpalessi's Avatar
jpalessi
Tech Elite
iTrader: (55)
 
Joined: Feb 2008
Posts: 4,747
From: SoCal
Default
Originally Posted by Radical Freaks
Me too......to sell in Malaysia......im sure it will be HOT!!
send me a email to [email protected] and i'll send you all the info & pricing. thx!
jpalessi is offline  
Reply
Old 01-24-2010 | 06:51 AM
  #156  
billyrc
Tech Apprentice
iTrader: (2)
 
Joined: Jun 2008
Posts: 89
Default
Got my awesome JS today and a nice fresh case of fuel. Can't wait for MOTORAMA Great work on the engines ED wish you nothing but good luck!!!! THANKS FOR GREAT PRODUCTS
billyrc is offline  
Reply
Old 01-25-2010 | 01:29 PM
  #157  
moosemachine
Tech Initiate
iTrader: (1)
 
Joined: Oct 2009
Posts: 22
Default
Originally Posted by moosemachine
Hi,

Does any of you guys know whether there's anything I should be particularly aware of running 25% nitro instead of 30%?

Adjustments, anything?

Thanks alot.

Nb. Just received mine today. Absolutely beautiful

Nbb. Thank you absolutehobbyz.com, for outstanding service.
The reason I ask this question is that me, and my fellow rc enthusiast (Khaliffen, also present in this thread :-) just bought the fully modded version of the EB Mods JS. Looking in the manual that came with the beast it is not entirely clear if anthing should be done. As far as I can see the engine is set up to be running on 30% nitro and it does look like one out of three "spacers" should be taken out to compensate for the lesser nitro content (25%).

ED, do you recommend the use of 30%. Somebody told me that 25% will go easier on the engine but I haven't been able to locate any info in this.

I'd be grateful for any info on this.

Jacob
moosemachine is offline  
Reply
Old 01-25-2010 | 01:52 PM
  #158  
jpalessi's Avatar
jpalessi
Tech Elite
iTrader: (55)
 
Joined: Feb 2008
Posts: 4,747
From: SoCal
Default
Originally Posted by moosemachine
The reason I ask this question is that me, and my fellow rc enthusiast (Khaliffen, also present in this thread :-) just bought the fully modded version of the EB Mods JS. Looking in the manual that came with the beast it is not entirely clear if anthing should be done. As far as I can see the engine is set up to be running on 30% nitro and it does look like one out of three "spacers" should be taken out to compensate for the lesser nitro content (25%).

ED, do you recommend the use of 30%. Somebody told me that 25% will go easier on the engine but I haven't been able to locate any info in this.

I'd be grateful for any info on this.

Jacob
Jacob,
you can run 25% no problem. the deck is set for 25%-30% and is as low as you can go, now with that said 20% can not be ran with this engine.
jpalessi is offline  
Reply
Old 01-26-2010 | 11:21 AM
  #159  
moosemachine
Tech Initiate
iTrader: (1)
 
Joined: Oct 2009
Posts: 22
Default
Originally Posted by jpalessi
Jacob,
you can run 25% no problem. the deck is set for 25%-30% and is as low as you can go, now with that said 20% can not be ran with this engine.
OK, so what you're saying is that we don't have to make any amendments or adjustments to the setup to run 25%?

Jacob
moosemachine is offline  
Reply
Old 01-26-2010 | 11:33 AM
  #160  
JUD's Avatar
JUD
Tech Master
iTrader: (4)
 
Joined: Mar 2009
Posts: 1,342
From: Delaware
Default
Just got my EB MODS JS today. I put the 086 pipe on with 25% fuel. Started it up and WOOOOW!!! Sooo much power. Very good top and bottom end. Im racing at bumps and jumps Sunday. We will see how it runs.
JUD is offline  
Reply
Old 01-26-2010 | 12:20 PM
  #161  
grkboy
Tech Apprentice
 
Joined: Dec 2009
Posts: 65
Default
Guys, still no video footage.... cmon, lets c her in action!
grkboy is offline  
Reply
Old 01-26-2010 | 12:25 PM
  #162  
jbright33's Avatar
jbright33
Tech Master
iTrader: (15)
 
Joined: Dec 2008
Posts: 1,352
From: shamokin pa
Default
Originally Posted by grkboy
Guys, still no video footage.... cmon, lets c her in action!
you will just have to get one to feel the power for yourself
jbright33 is offline  
Reply
Old 01-26-2010 | 12:29 PM
  #163  
jpalessi's Avatar
jpalessi
Tech Elite
iTrader: (55)
 
Joined: Feb 2008
Posts: 4,747
From: SoCal
Default
Originally Posted by moosemachine
OK, so what you're saying is that we don't have to make any amendments or adjustments to the setup to run 25%?

Jacob
You should only run 25% -30% nitro in this engine, and no need to touch anything.
jpalessi is offline  
Reply
Old 01-26-2010 | 12:47 PM
  #164  
j_blaze14's Avatar
j_blaze14
Tech Master
iTrader: (34)
 
Joined: Feb 2008
Posts: 1,692
From: Tampa, Fl
Default
Originally Posted by j_blaze14
from that pic, carb looks go, i've tuned many of them. probably different internal parts as the alpha motors did, but mostly go based. the reason people want too know who makes the motor is because everyone has their favorites and the ones they hate. some love italian motors and some hate them and vise versa for chinese or taiwanese motors. i think there is a lot to be said for go motors that a lot of other companies are basing their line of motors off them and designing motors with some of their products. i know of a big italian company that does the same... these js series look very nice. is the crank tin coated or titanium nitride?
this is not a go, only similarity is the carb. case is tougher and is the only problem i've had with go's. this will be my next motor. for truggy, stock or mod?
j_blaze14 is offline  
Reply
Old 01-26-2010 | 01:09 PM
  #165  
jpalessi's Avatar
jpalessi
Tech Elite
iTrader: (55)
 
Joined: Feb 2008
Posts: 4,747
From: SoCal
Default
Originally Posted by j_blaze14
this is not a go, only similarity is the carb. case is tougher and is the only problem i've had with go's. this will be my next motor. for truggy, stock or mod?
The JS engine is a totally different engine from anything out there. As stated in a previous post the carb was resourced from another local factory (GO).

either one will be great in truggy. the FM will rev faster and have more top/rpm.
jpalessi is offline  
Reply

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.