|
Re: Pipes for a Evo2 5port
Originally posted by gentleman81 any suggestions for a pipe to go with a evo2 5port, smaller parkinglot track, can be slick at times 70-90 straightaway and a very quick twisting (everchanging) infield. MTX 3 is the car. |
Originally posted by InitialD afm, do you know if the engine used at the Pre-Worlds in Brazil feature AAC or ABC sleeves? The one you posted is ABC. The one I posted, is to help "Gentleman81" who is looking for a 5 port engine on the $200 (tops) bracket. AFM |
Re: Pipes for a Evo2 5port
Originally posted by gentleman81 any suggestions for a pipe to go with a evo2 5port, smaller parkinglot track, can be slick at times 70-90 straightaway and a very quick twisting (everchanging) infield. MTX 3 is the car. It is been used succesfully by Uriah Murnan on his moded Sirios. AFM |
For Sirio EVO 2 trp pro E, is a 3 port motor. What is best, the tp03 or the tp04, mega pipes? I have a Sirio inline pipe and work very well, but i hear this pipes work well, too and are more heavys.
|
Originally posted by xluis For Sirio EVO 2 trp pro E, is a 3 port motor. What is best, the tp03 or the tp04, mega pipes? I have a Sirio inline pipe and work very well, but i hear this pipes work well, too and are more heavys. Las dos Megas van bien, solo que depende del circuito, La TPO4 es mas tirada hacia los bajos, la TPO3 es mas completa dando una curva de potencia mas plana si resaltar tanto los bajos o las altas. Depende mucho de la pista y las relaciones que usas. AFM |
Ok, muchas gracias.
He pedido un tp03, para probarlo, este fin de semana. La semana siguiente voy a correr el Nacional, es un circuito medio, los desarrollos que uso en el 710 son 17-22, 61-57/56. |
Originally posted by xluis Ok, muchas gracias. .............. es un circuito medio, los desarrollos que uso en el 710 son 17-22, 61-57/56. A que le llamas circuito medio?? Cuanto tiene de recorrido y que tan larga es la recta principal?? AFM |
Originally posted by afm From my sources, the engine used was an Evo2 3 ports ABC, using 16% Nitro fuel at 7% oil (70% synthetic and 30% Castor). The one I posted, is to help "Gentleman81" who is looking for a 5 port engine on the $200 (tops) bracket. AFM |
Originally posted by gentleman81 not quite $200 tops but around that $250 at the most for a stock motor, alot of modified motors i have seen run a little touchy? http://murnanmodified.360k.com/ Barry baker runs them quite succesfully, and Uriah really knows this engines inside out. Why don't you speak with him, he'll give the best advice for your money. AFM |
i will check them out!
|
Re: Re: Pipes for a Evo2 5port
Originally posted by afm Go with the Novamega TPO4, Part Number 2183. It is been used succesfully by Uriah Murnan on his moded Sirios. AFM |
Re: Re: Re: Pipes for a Evo2 5port
Originally posted by gentleman81 where can i get a novamega pipe? Try www.atomichobbies.com AFM |
wow they have all the pipes listed good site thanks
|
Re: Re: Pipes for a Evo2 5port
Originally posted by afm Go with the Novamega TPO4, Part Number 2183. It is been used succesfully by Uriah Murnan on his moded Sirios. AFM |
Originally posted by afm Cual es la relacion interna de los diferenciales del 710??? A que le llamas circuito medio?? Cuanto tiene de recorrido y que tan larga es la recta principal?? AFM El ratio final equivale a: 17-61=6.72 22-57=4.85 22-56=4.77 El circuito tiene unos 200-230 m. de cuerda. La recta no estoy seguro, pero esta sobre 60-70 metros. |
| All times are GMT -7. It is currently 09:17 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.