|
Originally Posted by blktransam
(Post 6559806)
u are running the ws7 in the truggy and c6 in buggy?...I am opposite I love the c6 in my truggy, and ws7 in buggy :)
|
It's hard to say on the feel as everyone tunes differently. But to me and how I tune the engine felt stronger then my last C6 and the power was very linear, very smooth like a electric motor.
|
Originally Posted by aaron joy
(Post 6561758)
It's hard to say on the feel as everyone tunes differently. But to me and how I tune the engine felt stronger then my last C6 and the power was very linear, very smooth like a electric motor.
|
Originally Posted by aaron joy
(Post 6556756)
Killer 9 is a great engine for the price! I have almost 2 gallons on mine including the break-in (gallon). Engine is still super tight that you struggle to turn the flywheel over when mounted in my truggy.
My setup is: 7mm insert 2045/192mm pipe/header Byron %25 Pro (ditch the 8mm insert it comes with for a 7mm, BIG difference in runtime!!) Last week I was able to get almost 10 mins on a pit. I ran a 20 min. Main on one stop and ran out of gas after I crossed the finish line for my last lap. Luckily I had a nice lead on third to hang on to my 2nd place finish. The engine was cold, I don't know what the actual temp was but I would guess about 190'. I will definately buy another one when this one dies. |
I run it in my Truggy 8ight T 2.0 with 50/13 gearing on large tracks.
I run O'Donnell 97t, I usually run them for three race days then change it out. |
does anyone have any info on the new shark motors. May be someone can help me i am looking for a smooth motor like the os speed. Does rb make a motor with a smooth feel.
|
I have a shark engine that I am going to break in for a friend of mine as we speak. They are extremely limited in that US is only getting 100 out of 400 in the world. It should be good the sleeve is cut like swiss cheese and the crank appears to weighted from the illustration included with the engine. I may be able to open it up for pics, I will ask my buddy if he minds. It does come with the better carb with the idle screw behind the carb.
Try a Killer 9, it is a runner. Smooth and great on mileage with 7mm insert. |
Hey Aron,free food at the hut tomarrow 11/8/09.And comcast Rob said he could kick your ass in monster truck if you had the marbles to race monster at the hut"free food barby q day " free food !I will let you run my RB 523 buddy!
|
Originally Posted by Pete Martinez
(Post 6576841)
does anyone have any info on the new shark motors. May be someone can help me i am looking for a smooth motor like the os speed. Does rb make a motor with a smooth feel.
|
Originally Posted by aaron joy
(Post 6577219)
I have a shark engine that I am going to break in for a friend of mine as we speak. They are extremely limited in that US is only getting 100 out of 400 in the world. It should be good the sleeve is cut like swiss cheese and the crank appears to weighted from the illustration included with the engine. I may be able to open it up for pics, I will ask my buddy if he minds. It does come with the better carb with the idle screw behind the carb.
Try a Killer 9, it is a runner. Smooth and great on mileage with 7mm insert. |
RB WS9/7mm venturi with Sirio 2013 pipe.
Try it. 10 + runtime when on the same track the OS gets 9min. |
Whats the diff. between the WS and C6???:confused:
|
WS has way more power down low and not that much top end speed.
|
Originally Posted by vti-chris
(Post 6578889)
RB WS9/7mm venturi with Sirio 2013 pipe.
Try it. 10 + runtime when on the same track the OS gets 9min. |
Originally Posted by aznitronut
(Post 6579061)
Have you tried the RB 2045 pipe with the 192 header yet? Usually you will get better more. and better mileage. Not sure of the 2013, what is it similar to?
|
| All times are GMT -7. It is currently 04:39 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.