28LikesRw modding and engine rebuilding
06-01-2012 | 04:38 PM
#167
Tech Regular
iTrader: (48)
Joined: Nov 2007
Posts: 334
engine
awesome engine Rex It just dropped its nuts last weekend.I Bumped from the b-main to the a-main started last and took 6th In the night race I also took 6th starting last I was fighting for 3rd but ran out of fuel only 5 minute run times.I`m going to lean it out more this weekend thanks.Awesome power even when running rich thanks.Tim
06-05-2012 | 05:08 PM
#169
Tech Addict
Joined: May 2011
Posts: 594
From: New Zealand Auckland
Hi Rex,
I got to see one of your modded Lutz Alphas run as Stephen was putting a race tune on it, very impressive!
He's a good friend of mine and one of the top truggy drivers in Auckland...we went to the femca champs in aussie last year, one of the best rc racing trips ever.
Craig
I got to see one of your modded Lutz Alphas run as Stephen was putting a race tune on it, very impressive!
He's a good friend of mine and one of the top truggy drivers in Auckland...we went to the femca champs in aussie last year, one of the best rc racing trips ever.
Craig
Last edited by curacing2; 06-05-2012 at 05:42 PM.
06-13-2012 | 06:08 PM
#171
06-17-2012 | 02:30 AM
#172
Tech Rookie
Joined: May 2012
Posts: 11
From: Palmerston North, New Zealand
Stephen B From N.Z
Hi there Rex, Stephen .B from Auckland N.Z ran your Sponsored modded Ryan Lutz edition Alpha engine today in his Mugen Seiki Truggy.
He said the engine is real strong and fast, he is confident in the engines ability to deliver results even considering that it has not "dropped its nutz" yet.
He said it was tuned on the rich side running an O.S P3 Plug, Alpha plus 0801 tuned pipe on 30% Nitroninja Race fuel.
Good run times of 8.5min tanks (on a tight engine) and impressive power shined through (even through the worst of the mechanical problems he had during the day). A few decent qualifiers seen him seal a place in the A main.
After calling a delay at the start of the A main finals to sort out some diff issues, he found himself starting from the back of the field.
After the first lap he had gained 3rd position and then scorched his way up toward and then claiming the number 1 position over the remainder of the race and held the lead position until the finish with 2 laps up on the next competitor.
Not a bad days racing with what looks to be a very strong engine, don't you think?
He said the engine is real strong and fast, he is confident in the engines ability to deliver results even considering that it has not "dropped its nutz" yet.
He said it was tuned on the rich side running an O.S P3 Plug, Alpha plus 0801 tuned pipe on 30% Nitroninja Race fuel.
Good run times of 8.5min tanks (on a tight engine) and impressive power shined through (even through the worst of the mechanical problems he had during the day). A few decent qualifiers seen him seal a place in the A main.
After calling a delay at the start of the A main finals to sort out some diff issues, he found himself starting from the back of the field.
After the first lap he had gained 3rd position and then scorched his way up toward and then claiming the number 1 position over the remainder of the race and held the lead position until the finish with 2 laps up on the next competitor.
Not a bad days racing with what looks to be a very strong engine, don't you think?
06-17-2012 | 09:28 AM
#173
Hi there Rex, Stephen .B from Auckland N.Z ran your Sponsored modded Ryan Lutz edition Alpha engine today in his Mugen Seiki Truggy.
He said the engine is real strong and fast, he is confident in the engines ability to deliver results even considering that it has not "dropped its nutz" yet.
He said it was tuned on the rich side running an O.S P3 Plug, Alpha plus 0801 tuned pipe on 30% Nitroninja Race fuel.
Good run times of 8.5min tanks (on a tight engine) and impressive power shined through (even through the worst of the mechanical problems he had during the day). A few decent qualifiers seen him seal a place in the A main.
After calling a delay at the start of the A main finals to sort out some diff issues, he found himself starting from the back of the field.
After the first lap he had gained 3rd position and then scorched his way up toward and then claiming the number 1 position over the remainder of the race and held the lead position until the finish with 2 laps up on the next competitor.
Not a bad days racing with what looks to be a very strong engine, don't you think?
He said the engine is real strong and fast, he is confident in the engines ability to deliver results even considering that it has not "dropped its nutz" yet.
He said it was tuned on the rich side running an O.S P3 Plug, Alpha plus 0801 tuned pipe on 30% Nitroninja Race fuel.
Good run times of 8.5min tanks (on a tight engine) and impressive power shined through (even through the worst of the mechanical problems he had during the day). A few decent qualifiers seen him seal a place in the A main.
After calling a delay at the start of the A main finals to sort out some diff issues, he found himself starting from the back of the field.
After the first lap he had gained 3rd position and then scorched his way up toward and then claiming the number 1 position over the remainder of the race and held the lead position until the finish with 2 laps up on the next competitor.
Not a bad days racing with what looks to be a very strong engine, don't you think?
07-01-2012 | 09:54 PM
#176
Tech Rookie
Joined: May 2012
Posts: 11
From: Palmerston North, New Zealand
Stephen.B does it again with his Sponsored R.W Modded Ryan Lutz edition Alpha .21 race engine!
Achieving a much revered 40 second lap with improving consistency in the Truggy A Main at yesterdays ARCCC points round.
After some solid times put down through out the day and T.Qd as well,thanks to his ability to drive to the super grippy conditions, with the awesome power delivery of his R.W mods sponsored Alpha, and his Nitroninja 30% custom blended fuel he settled for 1st place finish with 4 laps up on the next competitor!
Stephen would like to say thanks again to Rex from R.W Mods for his awesome work on producing this modded engine.
Achieving a much revered 40 second lap with improving consistency in the Truggy A Main at yesterdays ARCCC points round.
After some solid times put down through out the day and T.Qd as well,thanks to his ability to drive to the super grippy conditions, with the awesome power delivery of his R.W mods sponsored Alpha, and his Nitroninja 30% custom blended fuel he settled for 1st place finish with 4 laps up on the next competitor!
Stephen would like to say thanks again to Rex from R.W Mods for his awesome work on producing this modded engine.
07-02-2012 | 08:31 PM
#177
Stephen.B does it again with his Sponsored R.W Modded Ryan Lutz edition Alpha .21 race engine!
Achieving a much revered 40 second lap with improving consistency in the Truggy A Main at yesterdays ARCCC points round.
After some solid times put down through out the day and T.Qd as well,thanks to his ability to drive to the super grippy conditions, with the awesome power delivery of his R.W mods sponsored Alpha, and his Nitroninja 30% custom blended fuel he settled for 1st place finish with 4 laps up on the next competitor!
Stephen would like to say thanks again to Rex from R.W Mods for his awesome work on producing this modded engine.
Achieving a much revered 40 second lap with improving consistency in the Truggy A Main at yesterdays ARCCC points round.
After some solid times put down through out the day and T.Qd as well,thanks to his ability to drive to the super grippy conditions, with the awesome power delivery of his R.W mods sponsored Alpha, and his Nitroninja 30% custom blended fuel he settled for 1st place finish with 4 laps up on the next competitor!
Stephen would like to say thanks again to Rex from R.W Mods for his awesome work on producing this modded engine.
Rex
