2LikesGRP... Engine... Thread...
03-08-2009 | 11:57 AM
#1099
yes, they use standard, idk what engine the ws7111 is, i never heard of it so i cant say
03-08-2009 | 12:06 PM
#1100
Joined: Aug 2006
Posts: 2,905
From: SOMEWHERE LUVIN ME SOME RC
awesome man so glad yall came out ..it was a pretty good turn out for their season opener ...we hope to have yall back really soon ...let us know of any good racing yalls way and we will try to make it as well ...later
03-08-2009 | 02:44 PM
#1102
has anyone ran the tuned version with sidewinder worlds blend? i have a friend with that combo and we can't seem to get it tuned in. i run a mr ninja and it tunes wonderful, but his just will not tune in to sidewinder. it wants to run 200* and makes "o.k." power. we both run rc8's so i guess it could be a fuel tank issue. this is his third tuned grp and he's on his 4th or 5th fuel tank. just trying to rule out the fuel.
03-08-2009 | 02:49 PM
#1103
has anyone ran the tuned version with sidewinder worlds blend? i have a friend with that combo and we can't seem to get it tuned in. i run a mr ninja and it tunes wonderful, but his just will not tune in to sidewinder. it wants to run 200* and makes "o.k." power. we both run rc8's so i guess it could be a fuel tank issue. this is his third tuned grp and he's on his 4th or 5th fuel tank. just trying to rule out the fuel.
03-08-2009 | 02:54 PM
#1104
Could someone tell me what the noise is coming from my GRP tuned. At idle it does not do it but at mid to full throttle then back down to idle there is a ratteling like sound. Almost like the rod is touching the block going up then back down. Checked everything and no rubbing of the rod. BTW the engine runs perfect stays tuned in everyway.
03-08-2009 | 03:11 PM
#1105
Joined: Aug 2006
Posts: 2,905
From: SOMEWHERE LUVIN ME SOME RC
has anyone ran the tuned version with sidewinder worlds blend? i have a friend with that combo and we can't seem to get it tuned in. i run a mr ninja and it tunes wonderful, but his just will not tune in to sidewinder. it wants to run 200* and makes "o.k." power. we both run rc8's so i guess it could be a fuel tank issue. this is his third tuned grp and he's on his 4th or 5th fuel tank. just trying to rule out the fuel.
03-08-2009 | 03:38 PM
#1106
Tech Apprentice
iTrader: (1)
Joined: Mar 2007
Posts: 63
[QUOTE=bherzog513;5521304]
Bill,The 3 Grp that i got all have went stupid fat at the 3 gallon mark.It has happen to me in practice over the weekend and the motor has no more then 3 gallons on it.I was running it in practice and it was fine and i handed the controller over to Hudson he ran about 5 laps and it was fine, then he handed it back to me and it was so fat that it wouldn't even pull itself around the track.It happen that fast,so just lean it out its fine. my motor never ghost flamed on me i have ran these motor for a year every weekend and they never have let me down. Jason White
if he didnt then i dont see how they can call them mario rossi tuned motors.
Does Kernal Sanders tune the friars that make your KFC chicken?
I've got four gallons on a GRP tuned. I dont race every weekend. After 2 weeks of sitting it was un-tunable today. I began systematically going through the obvious things but the same result concluded. Motor would run good, then go "dumb" rich. I was told by a very knowledgeable person that this is common and it is due to needle o-rings(idle and high).
Motor has ran for a couple weeks at 2.5-3.25 out on the high speed needle with the bottom as lean as I could get it. The motor wouldnt run until I leaned the top. Is everyone throwing their motors away once this happens, because I havn't seen anything resorting to these problems here, I hear of the mystery flame, but no fix other than buying another brand of engine? If I set the engine's needles as losi claims, it wont run at all, after four gallons. I wish Drake Would respond to my "real world" totall screwed situation.
(MOTOR HAS TONS OF PINCH)
My question to the board is, are their any mentions of any of this, here?
Does Kernal Sanders tune the friars that make your KFC chicken?
I've got four gallons on a GRP tuned. I dont race every weekend. After 2 weeks of sitting it was un-tunable today. I began systematically going through the obvious things but the same result concluded. Motor would run good, then go "dumb" rich. I was told by a very knowledgeable person that this is common and it is due to needle o-rings(idle and high).
Motor has ran for a couple weeks at 2.5-3.25 out on the high speed needle with the bottom as lean as I could get it. The motor wouldnt run until I leaned the top. Is everyone throwing their motors away once this happens, because I havn't seen anything resorting to these problems here, I hear of the mystery flame, but no fix other than buying another brand of engine? If I set the engine's needles as losi claims, it wont run at all, after four gallons. I wish Drake Would respond to my "real world" totall screwed situation.
(MOTOR HAS TONS OF PINCH)
My question to the board is, are their any mentions of any of this, here?
03-08-2009 | 06:03 PM
#1107
has anyone ran the tuned version with sidewinder worlds blend? i have a friend with that combo and we can't seem to get it tuned in. i run a mr ninja and it tunes wonderful, but his just will not tune in to sidewinder. it wants to run 200* and makes "o.k." power. we both run rc8's so i guess it could be a fuel tank issue. this is his third tuned grp and he's on his 4th or 5th fuel tank. just trying to rule out the fuel.
03-08-2009 | 06:09 PM
#1108
Could someone tell me what the noise is coming from my GRP tuned. At idle it does not do it but at mid to full throttle then back down to idle there is a ratteling like sound. Almost like the rod is touching the block going up then back down. Checked everything and no rubbing of the rod. BTW the engine runs perfect stays tuned in everyway.
03-08-2009 | 06:44 PM
#1109
Thanks for the reply, I did notice the o-rings are very hard and dry. Will replace with new ones. Again thanks
03-08-2009 | 10:47 PM
#1110
Tech Adept
Joined: Feb 2009
Posts: 130
From: Dickson TN
I just got a tuned .21 and so far it seems like it is going to be a great engine. Only downside so far is the 8ight 2.0 I got for it to go in came with this nifty 4 way wrench and I decided I would take out the glow plug and check it before I started it and it was so tight it stripped the wrench. 
I got it out with another wrench so all it well (well, besides messing up my brand new wrench.)
I got it out with another wrench so all it well (well, besides messing up my brand new wrench.)