Go-Tech Engines Thread
ok help! Im looking at a stock go 5 port or that modded 3 port. Its just like a go but different name and its modded! What should i do?
http://www.amainhobbies.com/product_...ine-Turbo-Plug
http://www.amainhobbies.com/product_...ine-Turbo-Plug
Tech Elite
iTrader: (11)
i would run the GO cause the parts are easier to find and probally a heck of alot cheaper!
Suspended
iTrader: (202)
ok help! Im looking at a stock go 5 port or that modded 3 port. Its just like a go but different name and its modded! What should i do?
http://www.amainhobbies.com/product_...ine-Turbo-Plug
http://www.amainhobbies.com/product_...ine-Turbo-Plug
Tech Elite
iTrader: (11)
Tech Initiate
You'll like the stock 5port from GO, That's what im currently running with the stock GO pipe and has crazy power which I love. You'll be happy with the GO engine. If you decide to get one make sure you take your time on breaking it in as its super tight!
im looking at performance. And no i want a gx5r if i get one sorry lol
Tech Elite
iTrader: (11)
no your looking @ style and looks!,because if you were looking for performance you would run the go 5port for the price compared to the gx5r which is probally just a tad faster maybe,but mostly just a new head and carb throttle slide!
gx5r has better o rings better carb nicer head etc. Ok does anyone have an 0801 for sell. I dont car what condition but i need it cheap.
Tech Fanatic
iTrader: (10)
ok help! Im looking at a stock go 5 port or that modded 3 port. Its just like a go but different name and its modded! What should i do?
http://www.amainhobbies.com/product_...ine-Turbo-Plug
http://www.amainhobbies.com/product_...ine-Turbo-Plug
Come on buggy racers where are ya ?
I can't speek for others, but thats what I would run if I raced buggy.
MG66 or GX7Go for the insane top end wich suits the gearing in a buggy.
I can't speek for others, but thats what I would run if I raced buggy.
MG66 or GX7Go for the insane top end wich suits the gearing in a buggy.
gx7 has no bottom end imo. I ran the 7 port for awhiel cause i got one free and it isnt like the rest of my engines. I say get the gx5r.
I have a local customer running an X-Ray buggy. He's running the GX7R with the 2072 pipe and has all the bottom end he needs. Our local track is a relatively fast, open track with jumps right after turns. He never fails to clear the doubles and triples with the short run-ups. Gearing, clutching, tuning, and even chassis set-up have MAJOR influences on how a vehicle pulls coming out of corners.
The GX7R has plenty of bottom end for a buggy. I haven't seen an engine that can out-rev it on top end.
The GX7R has plenty of bottom end for a buggy. I haven't seen an engine that can out-rev it on top end.
for the gx5r what do you recommend for a pipe. The 0801 or the 2072? Im just looking for something that will make it smooth and keep run times good.