|
Originally Posted by Ruune
(Post 7158055)
That's great. I just received a limited number of them last night. I'm keeping one for myself and offering the others to dealers. I'm running 2x 2S 2500mAh life packs in a series. I believe they're rated at 20C, but more than enough for this application. Honestly, I feel that LiFe batteries are the best solution for starter boxes. They have sufficient voltage: 3.3v*4= 13.2v, which is greater than a 12v gel cell, so you'll get greater RPMs than with a 12v. Additionally, you get higher discharge rates (in AMPERES) with LiFe than both lipo and gel cell. Then there's the safety aspect. 12v gel batteries are acidic and lipos will BBQ your box if you run them all the way down. With a LiFe pack, you get the best of both worlds.
Can you show me a link to the type of life your refering, I'd like to check it out. |
Originally Posted by Flanno
(Post 7159273)
Can you show me a link to the type of life your refering, I'd like to check it out.
Sorry I couldnt help myself. I run Life receiver packs in both buggy and truggy and I love them. |
Originally Posted by Ruune
(Post 7158082)
Wanted to give you guys an update. I just received a large supply of parts- seals, glow plugs, cases, GX crankshafts, front and rear bearings, head shims, head buttons, STARTER BOXES, FUEL COOLERS, TOOLS, FUEL BOTTLES, etc. If you're looking for parts, chances are that I've got it in stock. Next order arrives in 2 weeks, which will be my bi-weekly GX engine inventory refresh.
For those of you that are waiting on parts from amain, they should be well-stocked next week. Also, if any of you are looking for break-in services, ask any of the dealers on here send me an inquiry and I'll point you to the right people. Thanks! Trey |
Originally Posted by matrixmike28
(Post 7159334)
LOL Flanno is finally trying to get a Life.:lol:
Sorry I couldnt help myself. I run Life receiver packs in both buggy and truggy and I love them. Very clever :lol: I run lifeo in my truggy, was wondering about the ones mentioned above for my starter box. |
hey... this is the type I'm using, but not the mfgr:
http://www.maxamps.com/products.php?cat=22 It should fit, but I havent tried this specific pack. I'm working on getting some that will fit, but they will have to be tested thoroughly and from a trusted manufacturer- Ive been burned by chinese battery manufacturers before. |
mark should be able to get them for u flanno as he sells max amp !!!
|
since amain dont know when they get the 7 port in stock ....where else can i go to?
|
can i use the go 7port sleeve on a 5port crankcase?has any of you guys try this?
|
Originally Posted by jeremiah23
(Post 7163479)
can i use the go 7port sleeve on a 5port crankcase?has any of you guys try this?
i've put the mg66 s/p & crank in my old 3 port no problems |
Amain will have them in stock next week.
|
Matty Griffin takes second place in UA NATS ! Adam Alexander takes 8th place A Main with the MG ! OH Yeah !
Matty Griffin is now sponsored by Answer RC Australia :) And Adam Alexander is just awesome ! YIPEE ! AND ! Congrats to Renaud Savoya btw taking Number 1 possie in AU Nats ! awesome driver and really nice guy ! PS what happened to Aaron Stringer ? DNF, ... Thats a bloody shame |
I was watching live feed on slyfox all 4 days.
Awesome driving ! Congrats to the top 12 for making the A main Final. Congrats to the team for putting in a great result, especially Adam Alexander. |
Caster with GO .25 engine
Hi All
Sorry if this question has been asked, I know you will probably get fed up with repeat questions from noobs! (Ihave been searching for an hour for an answer) Anyway I am about to start breaking in my UK Caster ZX1.5r RTR, it comes fitted with the RTR Go .25 engine, does this engine have the conventional short LSN or the GO long LSN. It has the black coolling head, with silver block. I can get pictures if required. Thanks to anyone who takes the time to answer.:batman: |
Originally Posted by dja1000
(Post 7166115)
Hi All
Sorry if this question has been asked, I know you will probably get fed up with repeat questions from noobs! (Ihave been searching for an hour for an answer) Anyway I am about to start breaking in my UK Caster ZX1.5r RTR, it comes fitted with the RTR Go .25 engine, does this engine have the conventional short LSN or the GO long LSN. It has the black coolling head, with silver block. I can get pictures if required. Thanks to anyone who takes the time to answer.:batman: open carb to WOT if the LSN goes all the way across its a long one .. |
EVERYBODY KEEPS TELLING ME TO GO TO www.racefactorindustries.com AND THAT IS THE GO TECH USA PLACE BUT EVERY TIME I TRY TO GO THERE IT COMES UP AS SOME KIND OF SEARCH ENGINE AND ITS NOT FOR RC STUFF IS THERE ANYBODY THAT CAN HELP ME OR TELL ME THE NEW WEB SITE
|
| All times are GMT -7. It is currently 07:22 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.