MIKESRCSTORE

will do it again we had a blast and cant wait till next time ninja out

RiseRC

iTrader: (4)

website got a little refresh..

Heats 1 & 2 from Rd 1 are up on the results page.

MIKESRCSTORE

all i can say for all of you who have not seen rise in 2011 your missing out

get 'r' done


ninja out

haggard80

Is anybody going to the track today? I wouldn't mind getting more run time on my new engine..

RiseRC

iTrader: (4)

I wont be able to make it out. Still need to get everything ready for spokane. If go to track you can call me and pick up your wheels and tires later, if you want.

dragracechief

iTrader: (1)

I think my plans have changed so I'm gonna try to go out next saturday if the weather's ok. Need to get some track time. With a lot of the guy's going over to the Hank Perry race, anyone else plan on being around?

tq_racing

iTrader: (67)

me and my brother are going to try and be there sat to get some track time with our nitros.

dragracechief

iTrader: (1)

Hope to see you guys there, though my plans may have changed again. Guess I'll know for sure by mid week. Drove horrible at the opener, but man I found a bunch wrong with my truggy, thought my maintinace program was good but I guess I'll have to step it up a notch, LOL!

tq_racing

iTrader: (67)

i need to do a rebuild. think after sat i well be. looked at my calendar and im going to be racing pretty much every weekend starting in a few weeks

haggard80

What was wrong with the truggy Hans?

dragracechief

iTrader: (1)

Had some very bad bearings, one very bent cvd (dont know how I missed that one), one front shock had a torn bladder along with a bent upper shock mount, and yes I had .9 clutch springs on the buggy and truggy.
Buggy is ready to go again with the new BCE +3mm chassis and truggy is almost back together without all my trick setups, back to normal, LOL! 1.0mm clutch springs too.

makaluch

iTrader: (36)

Empty or thinned fluid in the diffs would explain the "loose" feeling. Wrong tires for the loose topcoat on the track. Ride height looked a little tall out back. And I'd love to spend some time with that engine...out of balance and blubbery-rich isn't easy to drive when it clears. Go easy on yourself Hans. It was night time and you were out there with little or no time on the track or the truggy this season. All about the fun, man.... I think you were top 5 in the having fun class! I noticed the wobbling CVDs on the box. Bearing and/or outdrive eaters.

My outdrives are notched so bad that they'll bind the suspension. Might need a little more time before my D8 hits the track.

dragracechief

iTrader: (1)

Trying to talk myself into buying some sweep truggy tires, just can't seem to pull the trigger cause I have quite a few sets to use up.

dragracechief

iTrader: (1)

The AE's are notorious for cvd's bending, some thing you live with but the one on the truggy after the race was very bent, did'nt check but couldn't have been in the outdrive very far!

totld1

Hans,.first time out i always miss stuff as well...,i think its the excitement of finally getting out there...,hey guys....whoever goes out to the track while we are gone please make sure people check in and pay at the office....thanks guys