Kyosho FW-05RR Forum
#76
FXDAVILA did you find it easier to drive.
What rear shock position are you using?
Are you using the rear swaybar?
I have almost got a good setup just need a bit better rear grip.
What rear shock position are you using?
Are you using the rear swaybar?
I have almost got a good setup just need a bit better rear grip.
#77
Originally Posted by FXDAVILA
I need more mid corner steering. This weekend I will try 1deg. toe-out and add more front droop.
FXDAVILA
FXDAVILA
Cheers!
Last edited by OrAnGe PoWeR; 01-26-2006 at 05:57 PM.
#78
Originally Posted by FXDAVILA
I would like to thank everyone for all the help. This past weekend 01-21-06 at my local HobbyTown race track, I TQ the nitro stock class. http://www.rcfiles.com/forums/showthread.php?t=11150 My lap times were just as fast as the mod guys but when your racing against some of the top drivers in the US. Guys like Brandon McNally, Ron Atomic, Al Guerra, Cody Gary, and Todd Bath. You have to come with your A game. I think I'm like a B+.
I need more mid corner steering. This weekend I will try 1deg. toe-out and add more front droop.
I'll post some pics of my car tonight.
I love this car.
thanx again.
FXDAVILA
I need more mid corner steering. This weekend I will try 1deg. toe-out and add more front droop.
I'll post some pics of my car tonight.
I love this car.
thanx again.
FXDAVILA
#79
Here in Austin, TX. It's a parking lot track
#80
Tech Rookie
Wik, our lap times ,11's, were more consistent than mod. I think we are on the right track.
It looks like rain for Sat. Do you know if Austin Hobby will run on Sunday,if so be ready for an old-fashion a$$ spanking.
Just on a side note. I think three50z is on his way to being the next Josh Cyrul.
It looks like rain for Sat. Do you know if Austin Hobby will run on Sunday,if so be ready for an old-fashion a$$ spanking.
Just on a side note. I think three50z is on his way to being the next Josh Cyrul.
#81
Tech Adept
Join Date: Jan 2006
Location: Sydney, Australia Home for none of you rc needs!
Posts: 154
Here in australia we have very little race tracks....we would be lucky to have a carpark track i think we have like 2 tracks in my area for onroads...aww well what can you do...gl to everyone racing over there in USA
#83
nice
#84
Tech Master
iTrader: (9)
I just weighed the car the way it sits in the pictures above and it comes it at 1650. Does this sound about right with out fuel!!
Also, I have 39t ring gears in the car right now....what do you all think about moving to 37t's for Ft Myers? Ft Myers is not a hugh 1/8th scale track but still pretty good size for 200MM.
Also, I have 39t ring gears in the car right now....what do you all think about moving to 37t's for Ft Myers? Ft Myers is not a hugh 1/8th scale track but still pretty good size for 200MM.
#85
i would say stick with the 39t if it's a good size track so you have good top end and tourqe but if it's a technical track go with the 37's to get around corners alot faster.
Nice RR Jeff.
Nice RR Jeff.
#86
Tech Master
iTrader: (9)
ChApS so, I guess the 37's slow the punch a bit on a technical track thus not spinning as much coming out of corners? I will leave the 39s in for now and play with pinions and spurs and then if it is all strung out half way down the strait, I will slap the 37's in there. I was reading some posts in the WinterNats thread and it looks like a few 05RR's will be racing there. I will have to poke their pits and absorb.
#87
Hi Guys, i just got an Eagle Racing set-up station ang will try to redo my previous settings...can anybody share me their settings for camber, caster, toe-in, droop, ride height for my 05RR, im running on a tight, small, technical track. Thanks
#88
I believe stock setup for a tight teqnical tracks i quit good.
And then just make simple options from there.EG: Shock position,shock fluid and clutch settings.
Hope i could help.
And then just make simple options from there.EG: Shock position,shock fluid and clutch settings.
Hope i could help.
#89
Tech Regular
Originally Posted by jeff whiting
ChApS so, I guess the 37's slow the punch a bit on a technical track thus not spinning as much coming out of corners? I will leave the 39s in for now and play with pinions and spurs and then if it is all strung out half way down the strait, I will slap the 37's in there. I was reading some posts in the WinterNats thread and it looks like a few 05RR's will be racing there. I will have to poke their pits and absorb.
havy
#90
Tech Master
iTrader: (9)
Originally Posted by havy
Hi, I will be running my fw05rr as well as my friend Angle S, you are more than welcome to check out our set-ups. I run 37's on all tracks and am quite happy with the punch.
havy
havy
JEFF