|
I can actually get a really good deal on a reg kit, so what parts are in need of imediate replacement.(i.e. hop ups) or is the stock kit good enough as it is?
By the way, anyone looking for a Nitro TC3?:lol: |
The stock kit, well built and set up is very competative. The pro kit just has most of the upgrades you will want.
|
Originally posted by Rob Phillips I can actually get a really good deal on a reg kit, so what parts are in need of imediate replacement.(i.e. hop ups) or is the stock kit good enough as it is? By the way, anyone looking for a Nitro TC3?:lol: |
Re: MTX-3 19/16
Originally posted by Quiet ok guys what's the real deal? some people say you ought to have a 1.5mm split others say 2.5 and even 4mm difference in tire diameter between front and rear, being the front tire the smallest when running 19/16 side pulleys in order to get even or close to even tire wear, what tire size is everyone prepping for the main? I am a newbie to nitro-foam tire stuff! please help. thanks O.R. |
offloading mtx's in for sale forum
|
Do you have a NIB mtx3 prospec to sell?
|
Re: Re: MTX-3 19/16
Originally posted by joemugen i am not running the mtx-3 anymore, but when i didnt run the 19/16. put a 23t (from serpent) in the front pully and leave the back stock. run a one mm split. it is better than the 19/16. probably all mugen team drivers are doing this. We normally run a 1.5mm splint in the main, front tires staring out smaller.:) |
Originally posted by Scott Fisher the mugen pack is 730ma. I made one out of 850ma batteries. GP has a 950ma AAA battery and I have seen another brand that has 1000ma batts. If you don't want the mugen pack, just make one yourself. Sony have a 1.100mah AAA cells ... very good ... |
spool
does anyone make or sell a spool for the front of my mtx-3. Haywyre
|
batteries
1 Attachment(s)
I managed to solve my runtime problems. I stuffed in two 2000 mA Li-Poly batteries in my Mugen. I'm now getting 2 hours run time. I used the Novak Nitro servo regulator[ cool blue light] . That nocked down the voltage. The weight is 3 grams more than the stock 750 mA. HAYWYRE
|
Originally posted by Slotmachine The Kawahara solid diff will work in the front, the only place I ever used it was The Texas Biggie! |
Re: Re: Re: MTX-3 19/16
Originally posted by ROBBIE C Sorry but none of the guys I no are doing this, all we ever run are the stock pully's, we never use anything from another car to make our cars re-act different. We normally run a 1.5mm splint in the main, front tires staring out smaller.:) |
Re: batteries
Originally posted by haywyre I managed to solve my runtime problems. I stuffed in two 2000 mA Li-Poly batteries in my Mugen. I'm now getting 2 hours run time. I used the Novak Nitro servo regulator[ cool blue light] . That nocked down the voltage. The weight is 3 grams more than the stock 750 mA. HAYWYRE why didnīt look at the regulator before? excellente idea! |
Re: Re: batteries
Originally posted by Seisick why didnīt look at the regulator before? excellente idea! |
Re: spool
Originally posted by haywyre does anyone make or sell a spool for the front of my mtx-3. Haywyre |
| All times are GMT -7. It is currently 05:53 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.