FREAKAH

Hey Robbie C,

Can you give me a full MTX-2 set-up for a sorta tight untreated high traction parking lot track?
I usually run a stiff set-up(with and without swaybars) with good results and tried soft set-ups with terrible results. Your'e known for liking the soft stock silver rears. How do you get away with it?
Thanks!

Sorry guys for posting a MTX-2 question on a MTX-3 thread but it's the only place I can find Robbie. A MTX-3 will soon grace my workbench soon though.

aussiedanny

hello mR rjl,,,see ya down the track,,,,,

rjl

Bloody Irish, you started it! Now have you contacted interpol to track down your missing pipe?

JordanC

iTrader: (8)

tut tut tut........ Be nice Lob

JordanC

iTrader: (8)

WooHooooooo. It is the garage and half built...... Don't reckon i'm hanging out!

SpeedTech

iTrader: (5)

Nytrochaos,

It should be there already...look for a rectangular box about 12x10x3 in size

Steve Wang
Speed Tech R/C
www.speedtechrc.com

jason102276

i finally have everything i need to race this weekend thanks to speedtech they really came through on the battery and engine i needed
after checking the width of my car last night with spacer behind the wheel hex the car is 200mm and 30mm rear 0 offest wheels fit no rubbing there was no need to modify anything all the wheel hype was for nothing
i hope i dont break any parts i hope they get here soon

stefan

Jason,

glad that you cleared this pre-production hype about the tires.

Now we have one more, GEARING

ME-student

there will be no more gearing debate.... i already explained there is no problem with the gearing...

Nytrochaos

this is so awesome, my parents are going to be at work over my thanksgiving break, so im going to be alone at home with my sisters, who dont care what i do, and get to look at my pretty box, race my mtx-2 in the school parking lot (just repaved......and only a block away) and paint my new body!!!!........and i have 100 dollars from a while back that i get to spend at the hobby shop.......and then HANNUKAH....where i can officially open that oh so beautiful box!!!!!!!!!!!!!!!!

click, dublin

Now lets see OZ = Australia.

Who was sent to Australia by boat in ye old times?

I don't think I need Interpol I have my first suspect . . . .


All the best

rjl

I don't think any of them would have your pipe.
My car is still understeering a bit, you don't know who's got my front grip do you?
Jordan stay off the net and get that car built so I can woop your bum and collect my dollar.

ROBBIE C

MTX-2 parking lot set up
42 fronts
37 rears
silver springs all around
shock oil 800w front
shock oil 350w rear
front shock position second hole from bottom
rear shock position second hole from bottom
front camber -2 degrees
rear camber -3 degrees
front toe 1/2 degrees out
rear toe 1 1/2 degrees in
swaybar front 15 degree angle
rear swaybar none
front droop +2
rear droop +6
down stops none
rear camber link inner hole down
outer hole up
front ride hieght 4mm
rear ride hieght 5 mm
front car wigth 198mm
rear car wigth 200mm
gear 16/49 19/45
body Dodge Stratus
wing position middle hole
plug Rex No 6
fuel 30% to 40%

if I missed something let me know.

jason102276

to get more steering i would first thicken rear diff oil to 30000 i almost did it when i was assembling but decided to try stock first my mtx-2 ran great with front one way and 30000 in the rear diff and this was on 26mm tires front and rear

jason102276

robbie when are they going to come out with something to upgrade brake pads i almost sanded them off before it stopped binding