|
Originally posted by JPHRacer Does the MTX-3 have a centax with it? If not any one for the MTX-2 wil work right? I was wondering if Jaco nitro shoes will work with the car without and mods? Is there a special offset that the car was designed with? Thanks. |
Originally posted by jason102276 robbie do the trinity reflex pinions work on the new centax i was wondering why dogbones are falling out are you running 200mm with 0 offset wheels? if so could the old mtx-2 dogbones remedy this i know i personally have quite a few leftover from upgrading to universals When looking at the front of the car after setting my track wigth I dicied to use spacers behind the out drives just to make sure no problems when racing. |
Originally posted by jason102276 where did you get the AAA cells and what mah rating are they also what did you use to connect cells together wire? or is something better available? |
Originally posted by patelladragger I bought AAA energizer rechargeable NIMH cells from wal-mart, they are 650mah. I connected them together with Deans pro bars that I cut the ends off and shrink wrapped them up and put a plug on. B0215 650mah Futaba B0216 650mah Sanwa B0217 730mah Sanwa B0218 730mah Sanwa The 730mah after charging peaked out at 987mah Call Speed Tech RC/ Nitro House/ Micro RC or Elite Hobbies for avalibilty.:) |
CSF0623: outta town this weekend! :cry:
|
patelladragger: Trinity has a 650mah pack for around 26bucks... which i am using on my MTX3... coz i have no choice.....:sweat:
|
where did you get it?
|
from my LHS...:)
your LHS should have it also.. its been out for a while unless its outta stock... |
Originally posted by ME-student CSF0623: outta town this weekend! :cry: |
Originally posted by ROBBIE C Here are the different batteries B0215 650mah Futaba B0216 650mah Sanwa B0217 730mah Sanwa B0218 730mah Sanwa The 730mah after charging peaked out at 987mah Call Speed Tech RC/ Nitro House/ Micro RC or Elite Hobbies for avalibilty.:) |
quote:
Originally posted by ME-student CSF0623: outta town this weekend! Originally posted by Data stay out of town as long as you want. don't worry, i will take good care of your car :sneaky: |
I noticed that after I built my kit that the dog bones in the front appear to be a little short at full lock. I have my set the front at 198mm.
For those of you looking for batteries, OFNA makes a battery they call the brick, it fits perfectly. Nitro House has them in stock. they are $29.95. Someone else on this thread commented that their kit did not come with a pipe and someone told them that none of the kits come with a pipe. That's not true, the kit that comes w/motor, comes with the motor, header, and pipe. At least mine did... Also, does anyone have the AE starter box for the NTC3? If so how did you convert the box to accept the fly wheel in-line? |
The brick pack might fit but it binds against the fuel take causing it to foam and detunes your car.;)
|
Originally posted by rcfiend I noticed that after I built my kit that the dog bones in the front appear to be a little short at full lock. I have my set the front at 198mm. For those of you looking for batteries, OFNA makes a battery they call the brick, it fits perfectly. Nitro House has them in stock. they are $29.95. Someone else on this thread commented that their kit did not come with a pipe and someone told them that none of the kits come with a pipe. That's not true, the kit that comes w/motor, comes with the motor, header, and pipe. At least mine did... Also, does anyone have the AE starter box for the NTC3? If so how did you convert the box to accept the fly wheel in-line? Mine doesn't have a pipe and IF I'm supposed to have one is Mugen going to send it to me or do I take it up with who I bought the kit from? Also will someone clarify officially whether or not a regular 3+2 pack works? I have umpteen hump packs already and I wouldn't have needed to anything if I hadn't read on starting grid that you needed to get a different pack for this car. :confused: |
You will need AAA cells.
|
| All times are GMT -7. It is currently 08:46 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.