|
Originally posted by Vinyard Fish, Honestly, i dun know coz it will be the first time placing an order with them. but i do have a paypal account which they accept. |
Originally posted by RClover i usually send Mr. Lam a banker's cheque, so it is cheaper than the 3%..:sneaky: |
Turbo engine
I know you guys have lot of expereince about outlaw engines. I currently have a standard sirio on my MTX-3. I was planning to get the sirio outlaw coz i can get it from tower for 135. but I find this sirio to be a little touchy on the settings than my MT12 and O.S.
My choices are down to Collari 5port turbo, RB Concept X12 5-port, Novarossi RS12 (turbo 5-port) and a Novamega 5 port MS. They are around $200 so just on my budget. I would like to get the Rody tuned but it's too much $ for my engine budget. Can somebody help me out with the choices i have? What can you say with your experience with the engines above? TIA! |
Originally posted by Manticore Square: Main hollow shaft 3 racing rear CVD Rear CVD is also the Front CVD but without o-rings in the packing? |
Originally posted by Manticore you still need to pay for the cheque clearing charge that is included in the price !! :lol: :lol: :lol: |
Re: Turbo engine
Originally posted by Sike I know you guys have lot of expereince about outlaw engines. I currently have a standard sirio on my MTX-3. I was planning to get the sirio outlaw coz i can get it from tower for 135. but I find this sirio to be a little touchy on the settings than my MT12 and O.S. My choices are down to Collari 5port turbo, RB Concept X12 5-port, Novarossi RS12 (turbo 5-port) and a Novamega 5 port MS. They are around $200 so just on my budget. I would like to get the Rody tuned but it's too much $ for my engine budget. Can somebody help me out with the choices i have? What can you say with your experience with the engines above? TIA! MS 5 port ? i would say this is the same as S5 just with a snake name on it. so, the choice goes between RB 5 or S5. depending on your track size, RB 5 has better bottom end while S5 has better top end. it is all up to you to make your own judgement. this is just my personal opinion. |
Originally posted by RClover is the main shaft Ti made? Rear CVD is also the Front CVD but without o-rings in the packing? i forget to tell i have mugen front CVD. after some runs. it seems 3 racing has harder material on the CVD and it hasnt show any wear on the pin but mugen cvd has bad wear on it. |
Originally posted by RClover is the main shaft Ti made? Rear CVD is also the Front CVD but without o-rings in the packing? |
Originally posted by PTP Racing someone is getting their post count way up eddie it loooks like you got alot of really nice stuff and it must be nice to have a wife who is interested in RC if mine found out how much i was spending it might be the end of us let alone allowing me to use a credit card to buy a whole bunch of RC stuff :confused: :confused: :confused: :confused: |
Originally posted by Manticore by the way just in case some snakers or ass o driver question about the car's performance for needing so many hop ups. the car performs excellent out of stock box with the stock setting. there are only a few hop up that is really required to boost further up the performance such as kawahara rear sway bar, engine brace mugen CVD (front) and alloy hex And does it go stiffer than the 2.5mm mugen option sway bar? |
Originally posted by Manticore the main shaft is hardened hollow steel shaft. i forget to tell i have mugen front CVD. after some runs. it seems 3 racing has harder material on the CVD and it hasnt show any wear on the pin but mugen cvd has bad wear on it. After how long did the mugens start to show wear? |
1 Attachment(s)
Originally posted by TBR What does this Kawahara rear sway bar look like link to a pic would be good or pic on your car. :D And does it go stiffer than the 2.5mm mugen option sway bar? it does go stiffer then 2.5mm and it gives great traction and steering at the same time. the best thing is you can still use the stock spring with softer tire. |
Originally posted by TBR So you saying that 3 racing cvds are better?? :weird: :confused: After how long did the mugens start to show wear? |
Originally posted by Manticore they are in different location so I cannot really say which one is better. i might just get a pair of 3 racing and test it on the front. Would you like to thank any of your sponsors?? |
Originally posted by Manticore yes, mugen front and rear CVD are exactly the same thing but you will get two extra 0-rings with the front CVD pack. the o-ring is for the front oneway outdrive spacer. |
| All times are GMT -7. It is currently 12:11 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.