R/C Tech Forums - Mugen MTX-3

Originally posted by rdlken
Hi, Big Daddy:

Because I have no good skill, so I need a fast Engine to cover every single second I lost. Anyway, Any body you do not want but still under the following condition. No scratch, nice paint, nice cut, and good handling. Just kidding.

Are you going to try the new afla remo 2.0? Also, do you want to try the RD 8th scale body?

Small protato

"Big Potato": I saw what you had another that meek looking ZAC Project head last weekend, you weren't kidding about "fast engine" were you? :lol:

Time for another body Ken? Let me know. I get nervous when I see you licking your lips while staring at my pit table. I can help you out with that situation!

I don't know about the Alfa's, but it may be nice. I'd definitely be interested in the new RD 1/8th though... :D

eddiethefish

05-27-2003 04:25 PM

Re: Re: Re: Re: Re: QUESTION?

Quote:

Originally posted by rdlken
sh*t, stop telling people that I have a SARS.

Sorry, Master Ken. I should have been a bit more careful not to reveal your highly classified, confidential patient history to others. Please accept my apology.

kevink2

05-27-2003 04:28 PM

Quote:

Originally posted by ilaybrk
...I was going to send piston and sleve of to be squezed hope it works.

I'm very skeptical of this process. Once the chrome is gone from the sleeve, it's gone. Squeezing the brass ain't going to help- for long. From what I've seen and heard, the piston will seize up eventually against the brass, doing more damage to the engine. :deathstar

kevink2

05-27-2003 04:29 PM

Re: Re: Re: Re: Re: Re: QUESTION?

Quote:

Originally posted by eddiethefish
Sorry, Master Ken. I should have been a bit more careful not to reveal your highly classified, confidential patient history to others. Please accept my apology.

Dang now Revelation will be quarantined....:cry: :lol:

Varuth

05-27-2003 04:31 PM

What is ?

What is going on here? Any fun?

eddiethefish

05-27-2003 04:32 PM

Re: Re: Re: Re: Re: Re: Re: QUESTION?

Quote:

Originally posted by kevink2
Dang now Revelation will be quarantined....:cry: :lol:

I will be providing the N-95 mask free of charge, fyi, in support to the Master Ken. Wish you feel better soon.

Highly regards,

eddie the fish

US_MATRIX

05-27-2003 04:35 PM

Which parts break most easily?

Hi,

Just wondering which one i should be keeping as spare and what must be upgraded?

Thanks.

rdlken

05-27-2003 04:38 PM

Quote:

Originally posted by kevink2
I'm very skeptical of this process. Once the chrome is gone from the sleeve, it's gone. Squeezing the brass ain't going to help- for long. From what I've seen and heard, the piston will seize up eventually against the brass, doing more damage to the engine. :deathstar

I think it is good for short term if people resizing the piston.

Yes, I want RD to make the 8 scale body as good as possible. I already have good comments from Brad T and Dennis Richy, I also have Ron and Franics to test it and see what we need to improve. By having you to test it, I believe this will help a lot. I am getting ready 2 of those for you and please do not spend time on painting because it is for testing only.

Regrading the Zac project head engine, that is very very very very regular MT-12 ORIGNAL Engine.

Thanks

rdlken

05-27-2003 04:40 PM

Re: Re: Re: Re: Re: Re: Re: Re: QUESTION?

Quote:

Originally posted by eddiethefish
I will be providing the N-95 mask free of charge, fyi, in support to the Master Ken. Wish you feel better soon.

Highly regards,

eddie the fish

Can I have the brand 3M?

rdlken

05-27-2003 04:42 PM

Re: Which parts break most easily?

Quote:

Originally posted by US_MATRIX
Hi,

Just wondering which one i should be keeping as spare and what must be upgraded?

Thanks.

I would say the front hub carrier (upright). Front Arm and CVD (if you are using)

Lab-driver

05-27-2003 04:43 PM

Hi,

I really want to buy an MTX-3 but I can't find an online manual anywhere...I like to read them before I buy a kit...does anyone know where I could find one? Also...do the screws have a phillips head or hex head?

Joe

eddiethefish

05-27-2003 04:47 PM

Quote:

Originally posted by Lab-driver
Hi,

I really want to buy an MTX-3 but I can't find an online manual anywhere...I like to read them before I buy a kit...does anyone know where I could find one? Also...do the screws have a phillips head or hex head?

Joe

MTX-3 Manual

Mainly Hex at 2.0mm

rcfiend

05-27-2003 04:59 PM

Hey guys I have been away from gas for a little while, playing with the electric stuff. Time to break out the MTX-3, don't know what came over me. Couple of questions.

1. What diff oil are you guys using in your rear diffs w/one-way installed?
2. When do you know to increase or decrease the thickness of the diff oil?
3. The directions are some what vague, but how do the different blocks for the front and rear impact the cars handling?

Thanks

kevink2

05-27-2003 05:26 PM

Quote:

Originally posted by rdlken
I think it is good for short term if people resizing the piston.

Yes, I want RD to make the 8 scale body as good as possible. I already have good comments from Brad T and Dennis Richy, I also have Ron and Franics to test it and see what we need to improve. By having you to test it, I believe this will help a lot. I am getting ready 2 of those for you and please do not spend time on painting because it is for testing only.

Regrading the Zac project head engine, that is very very very very regular MT-12 ORIGNAL Engine.

Thanks

Exactly SHORT term.

Sounds good on the body. I heard Mr. Brad likes it.

Yep original stocker MT...;) :lol:

Is the 3M a better SARS mask than a N-95? Is it hard to drive with a mask on? :lol:

Manticore

05-27-2003 06:00 PM

Re: Re: NEED HELP!

Quote:

Originally posted by Ah10
Welcome aboard! you made a smart move to get rid of your expensive replacement parts car! :ha: :ha: and get a MTX3! Let's see what you can do with the new car! but first what engine are you going to put in there?

tell us what car was it? :lol: :lol: :lol: :lol:

All times are GMT -7. It is currently 05:16 AM.

Page 285 of 1150

285