R/C Tech Forums
Page 385 of 1150
« First
285
335
375
383
384
385
386
387
395
435
485
885
Last »
Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)
-   Nitro On-Road (https://www.rctech.net/forum/nitro-road-3/)
-   -   Mugen MTX-3 (https://www.rctech.net/forum/nitro-road/7666-mugen-mtx-3-a.html)

stefan 06-23-2003 04:56 PM
Thanks Data, much appreciated:)

eddiethefish 06-23-2003 04:58 PM
Originally posted by stefan
Thanks Data, much appreciated:)
DATA knows everything. stefan, don't forget to pick the belt that is 6.000mm ok? :lol:

RayJ 06-23-2003 05:44 PM
Gearing Solved
 
I called Mugen Racing today and they have the new gear sets available.
1st gear Spurs: 58,59,60
1st gear pinions: 20,21,22
2nd gear Spurs: 52,53,54
2nd gear pinions: 25,26,27,28,29
These gears will really help narrow the splits between 1st and 2nd gears, and also really give you a low drive ratio if needed for big tracks.
For example 2nd gear: 52/29 combo yields 4.53....whoa....I'll be able to tame any straight with that ratio.

I ordered the gears from nitro house. Hope this helps some.

Manticore 06-23-2003 05:57 PM
Re: Gearing Solved
 
Originally posted by Rayj
I called Mugen Racing today and they have the new gear sets available.
1st gear Spurs: 58,59,60
1st gear pinions: 20,21,22
2nd gear Spurs: 52,53,54
2nd gear pinions: 25,26,27,28,29
These gears will really help narrow the splits between 1st and 2nd gears, and also really give you a low drive ratio if needed for big tracks.
For example 2nd gear: 52/29 combo yields 4.53....whoa....I'll be able to tame any straight with that ratio.

I ordered the gears from nitro house. Hope this helps some.
i pick up a set of those gear from Mr. Lam last night. each of the gear comes with a gear ratio chart and the ratio is down to 0.001 i think it is not enough for DATA who needs 0.0001 ! :cool: :cool: :cool: :cool:

eddiethefish 06-23-2003 06:04 PM
Re: Re: Gearing Solved
 
Originally posted by Manticore
i pick up a set of those gear from Mr. Lam last night. each of the gear comes with a gear ratio chart and the ratio is down to 0.001 i think it is not enough for DATA who needs 0.0001 ! :cool: :cool: :cool: :cool:
Good!

We expect a full report by the next two weeks. :p

puma1824 06-23-2003 06:07 PM
Were can I purchase the Fast Tyres online for cheap? I was about to purchase some on Ebay then the auction went away :(

Thanks,
Puma

Manticore 06-23-2003 06:12 PM
Re: Re: Re: Gearing Solved
 
Originally posted by eddiethefish
Good!

We expect a full report by the next two weeks. :p
except that the weather is fine here :eek: :eek: :eek:

RClover 06-23-2003 07:08 PM
Originally posted by eddiethefish

thanks for noticing that. When'll you'll be running the 24K gold shock shafts? :D
nope, i prefer to run the 'Platinum' shock shafts..:D :D :lol:

puma1824 06-23-2003 07:09 PM
Originally posted by puma1824
Were can I purchase the Fast Tyres online for cheap? I was about to purchase some on Ebay then the auction went away :(

Thanks,
Puma

Anyone ??? :(

RClover 06-23-2003 07:32 PM
Re: Re: Gearing Solved
 
Originally posted by Manticore
i pick up a set of those gear from Mr. Lam last night. each of the gear comes with a gear ratio chart and the ratio is down to 0.001 i think it is not enough for DATA who needs 0.0001 ! :cool: :cool: :cool: :cool:
where do we start with these gearing? any recommendation?

RClover 06-23-2003 07:34 PM
1 Attachment(s)
another view of my beefed camber link

TBR 06-23-2003 07:42 PM
Originally posted by RClover
another view of my beefed camber link
I suggest looking at the mugen site it has the two gear charts for the standard gearing and also the new 0.8 gears. There you can compare what you are currently using and then see what gear ratio will marry up with the new 0.8 gears. Mugen

TBR 06-23-2003 07:45 PM
Originally posted by RClover
another view of my beefed camber link
Is that the Kawahara adjustable rear sway bar set I see on your car? How do you find it? is the stiffest setting on the adjustable bar harder than the 2.5mm mugen optional rear sway bar? how does the lightest settiging compare to the standard mugen rear sway bar?

eddiethefish 06-23-2003 08:08 PM
Originally posted by TBR
Eddie, is there anything different between the Mugen belts and the Kawahara belts? materials? width? :confused:
The Kawahara is softer belt and dull, while the Mugen is harder and shinier.
http://www.aiproduction.com/images/DSCF1854.JPG

RClover 06-23-2003 08:16 PM
Originally posted by TBR
Is that the Kawahara adjustable rear sway bar set I see on your car? How do you find it? is the stiffest setting on the adjustable bar harder than the 2.5mm mugen optional rear sway bar? how does the lightest settiging compare to the standard mugen rear sway bar?
yeap..that's the Kawa Adj Anti Roll Bar Set.
This is a must-get hop up, seriously! The adj stiffness allows me to adj according to the different track conditions. Yes, it is harder than the 2.5mm ones!

the lightest of this adj roll bar is just about the same as with the stock ones!


All times are GMT -7. It is currently 06:11 AM.
Page 385 of 1150
« First
285
335
375
383
384
385
386
387
395
435
485
885
Last »
Show 40 post(s) from this thread on one page

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.