|
Re: Tank
Originally posted by JordanC Have any of you guys had any drama's with the tank or top deck? I've got a bad leak in the rear seal, and the fuel has separated the carbon next to the belt tensioner! |
Re: Re: Tank
Originally posted by Cartman take it you did not run super glue round the chassis edgges to seal them?? Hi guys, As promised, I am posting my MTX3 with all the hop ups I got from Justrc. Eventhough I got all my hop ups 2 weeks ago but didnt have enough time to put them on, besides I dont want to put all of them on at once, I want to test what would work and what would be eye candies! Anyways, here they are Stratus 2.1 Body http://www.eglobalescrow.com/anthony...ratus side.jpg Stratus 2.1 Body 2 http://www.eglobalescrow.com/anthony...atus front.jpg Rear Sway Bar http://www.eglobalescrow.com/anthony...r sway bar.jpg Rear Shock Tower http://www.eglobalescrow.com/anthony...hock tower.jpg Upper Deck http://www.eglobalescrow.com/anthony...upper deck.jpg Light Weight Pulley Adaptor http://www.eglobalescrow.com/anthony... adaptor 2.jpg Light Weight Pulley Adaptor 2 http://www.eglobalescrow.com/anthony...ey adaptor.jpg Side Brace http://www.eglobalescrow.com/anthony...side brace.jpg Mid Block http://www.eglobalescrow.com/anthony... mid block.jpg Front Sway Bar http://www.eglobalescrow.com/anthony...t sway bar.jpg Light Weight Engine Mount http://www.eglobalescrow.com/anthony...gine mount.jpg Mid Support http://www.eglobalescrow.com/anthony...id support.jpg Enjoy guys! |
Corse-r
Just checked my car and i think the front belt is a little loose, maybe put two washers under the front of the mid shaft mount to tension it more?? |
ONE WAY DIFF
I have been thinking (i know its rare)
what if a one way was combined with a gear diff, locked drive on power but normal diff's in slow speed and full four wheel brakes! am i talking rubbish or would it work? |
Re: ONE WAY DIFF
Originally posted by Cartman I have been thinking (i know its rare) what if a one way was combined with a gear diff, locked drive on power but normal diff's in slow speed and full four wheel brakes! am i talking rubbish or would it work? You're not talking rubbish. As a matter of fact, it's what I've been thinking about for quite sometimes. You see, Kawahara has the Negative Diff: a combo of Solid Axle and gear diff. I'm sure it's just a matter of time til we see who'll the first coming out of such. Great idea and good thought!:) |
Ah10, in your picture, you dont have the throttle servo mounted below the radiotray? is this because the new deck does not permit this? or is it because you just have not done it? and also, what is so improved with this radio tray? lastly, your car, and some others, have those nice purple washers beneath your screw heads, where do you get those, and what are they called?
|
Re: Re: Re: Tank
Originally posted by Ah10 Hey guys, Finally I posted all the images I have since the first day I got my hop ups! yeah yeah yeah I know it took me forever to post them but here they are Hi guys, As promised, I am posting my MTX3 with all the hop ups I got from Justrc. Eventhough I got all my hop ups 2 weeks ago but didnt have enough time to put them on, besides I dont want to put all of them on at once, I want to test what would work and what would be eye candies! Anyways, here they are Enjoy guys! |
Originally posted by Nytrochaos Ah10, in your picture, you dont have the throttle servo mounted below the radiotray? is this because the new deck does not permit this? or is it because you just have not done it? and also, what is so improved with this radio tray? lastly, your car, and some others, have those nice purple washers beneath your screw heads, where do you get those, and what are they called? oh because the servo I have (Hitec 5925) the mount ear has a ridge on it and I dont want to shave it off so I mount the servo on top of the radio plate, no special reason! on the upperdeck, this out milled out more material and it is lighter(which wasnt the main reason I got it), the main reason I got this upperdeck is because on the steering servo horn area it is bigger, much easier to deal with if I need to fine tune the setting to zero. Those are called Concave Washers, and they are made by Ofna, you can get them pretty much all the hobby shop! they have 3mm and 4mm, I used 3mm on the chassis and 4mm where the engine mounting screws are. |
Re: Re: Re: Tank
Originally posted by Ah10 Hey guys, Finally I posted all the images I have since the first day I got my hop ups! yeah yeah yeah I know it took me forever to post them but here they are Stratus 2.1 Body http://www.eglobalescrow.com/anthony...ratus side.jpg Not for being a pr**k, but remember that none roll bars should protrude from the body (please, don't ask how I know.... losted my better qualification time by this... :cry: ) so if you plan to race, tech inspectors enforce you to lower roll bar or raise the body (do it my friend and save yourself from a headache). I prefeer to score a body than score a metal part (not matter if its a roll bar...) |
Re: Re: Re: Re: Tank
Originally posted by Corse-R Almost drowned with some pictures of you, but envy shouldn't last much, today cannot have some spare time to order some, but tomorrow have some time (have a reminder on my Exchange for tomorrow :D ) Not for being a pr**k, but remember that none roll bars should protrude from the body (please, don't ask how I know.... losted my better qualification time by this... :cry: ) so if you plan to race, tech inspectors enforce you to lower roll bar or raise the body (do it my friend and save yourself from a headache). Thank you very much I'll take it as you like the hop ups I have! Come on man! I wont take it as offensive! If I posted or addressed my opinion on something especially in the forum that means I am asking for input! not a fight! In fact I really really appreciate your point! and I would like to get more too! I really think we should have more ppl like you in the forum so we all could learn something new everyday! |
Re: Re: Re: Re: Tank
Originally posted by Corse-R Almost drowned with some pictures of you, but envy shouldn't last much, today cannot have some spare time to order some, but tomorrow have some time (have a reminder on my Exchange for tomorrow :D ) Not for being a pr**k, but remember that none roll bars should protrude from the body (please, don't ask how I know.... losted my better qualification time by this... :cry: ) so if you plan to race, tech inspectors enforce you to lower roll bar or raise the body (do it my friend and save yourself from a headache). I prefeer to score a body than score a metal part (not matter if its a roll bar...) |
WoW I didn't know that I guess you learn something new every day.:)
|
Originally posted by ROBBIE C WoW I didn't know that I guess you learn something new every day.:) |
what's up robbie I just came from svm yesterday.
you should have been there it was pretty fun. |
hey robbie, i read your name on the entries for winternats, good luck man.......give kenji somethin to compete with:D i hear the 705 isnt as dangerous as it came off to be........burch jr better watch himself.....and i swear to god, if baker with his damn electic pos with a nitro engine in it walks away with a win........hell will freeze over....anyays, robbie, show the world what the mugen's can do
|
| All times are GMT -7. It is currently 10:16 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.