Scott Fisher

iTrader: (28)

If you look at the manual for your car it will show you what parts you need and how to make one. You do need a few parts that don't come with the car, but it is easy to build a spool.

wallyedmonds

yes but it breaks easy,well i broke it,the pins turned in the plastic.

jeff whiting

iTrader: (9)

Yep the plastic one does strip. 3-Racing and others make a aluminum one. Just remember, when you crash with a front spool something is going to give. With the MTX-4 I almost never run anything but the oneway but if you just have to use the brakes that much I would run a front diff with 100k fluid in it. That way you won't get that bound up feeling a front spool delivers.

wallyedmonds

jhigga15

Do you guys have alot of clearence with the brake rod and the gears? Mine is real close and I am not sure if I like it...I may pull a mod

FOCKYERDODER

Hmmm, that's odd. Try to add some small pin on the pin slot to increase height.

jaykay

Hey guys,

has someone of you tried to install the kawahara mtx-3 servosaver? does it fit?
have you pictures of it?

best regards,
jay

wallyedmonds

its different,you need the mtx4 one

rmdhawaii

iTrader: (4)

Team Mugen Seiki MTX-4 Pilot: Roger Serafin
http://www.nitrokb.com/profiles/RogerSerafin.html

Just in case you missed the Who is this "Roger" guy? post in the main thread, I did up a racer profile on Roger at my Web site.

bigboss

hey guys, finally have time to play and tune my car
i no this is a noob question but here goes
what is rebound stop and bumb stop???
is there a website where i can read all about it??
thanks

asw7576

http://www.teamxray.com/teamxray/sho...p?file_id=2525

The basic set up know how is there.

EVIL-ET

has anyone used yeah racing parts/hop-ups, if so are they good or just crap?

ickvanovs

CONGRATULATION TO MUGEN!

PROVK

iTrader: (14)

Mugen Wins World 200MM Title!!!!!!!

Congratulations to Keisuke Fukuda
Mugen / Mugen/Sanwa/GRP/Ninja / Mugen MTX

wallyedmonds

m u g e n