Mugen MTX-4
#3946
Tech Master
Join Date: Apr 2002
Location: Time to put down the Golf clubs and poker chips and GO RACIN!
Posts: 1,219
parts
What is a great non digtal steering servo?
Where can I ger airtronics receivers?
and a reciever pack?
Where can I ger airtronics receivers?
and a reciever pack?
#3947
Futaba s9402 is a great non-digital srevo id get one of those rc-mushroom has the other stuff
#3948
digital servos is the way to go
#3949
Tech Fanatic
iTrader: (1)
Originally Posted by Bigtbone
What is a great non digtal steering servo?
Where can I ger airtronics receivers?
and a reciever pack?
Where can I ger airtronics receivers?
and a reciever pack?
For speed: 94360Z or 94362z
For torque: 94359z or 94361z
And you should easily find Airtronics rx and rx packs from many online stores.
#3950
yes they are but the consume more current making you battery go flat quicker.
http://www.futaba-rc.com/servos/digitalservos.pdf
http://www.futaba-rc.com/servos/digitalservos.pdf
#3952
Tech Fanatic
iTrader: (1)
Originally Posted by GrandeGixxer
OGR, thats why you need to get a front sway bar mount like the one from 3racing that has the cams on both sides. Then you can actually adjust it how it is suppoed to be done instead of half-assing it with the 1 cam.
#3953
Tech Elite
iTrader: (17)
From what Ive seen of 3racing parts they were some of the best quality hop up parts ive seen besides the high dollar stuff. Except for like 1-2 items where I think gpm did better in very small things. 3racing seems to look the best and is cut very nicely.
But even the 4mm locknuts from 3racing are awesome , real lightweight and grab tighter than stock. Good place to loose some unsprung weight.
But even the 4mm locknuts from 3racing are awesome , real lightweight and grab tighter than stock. Good place to loose some unsprung weight.
#3954
Tech Master
Join Date: Apr 2002
Location: Time to put down the Golf clubs and poker chips and GO RACIN!
Posts: 1,219
Good lookin out fellas
#3955
Originally Posted by ogreasurada
The chassis is still brand new and I'm 100% sure nothing is damaged, and the suspension is like frictionlessly free.
I will try your sway bar connection process and double check the holders when I have time to work on the car again. Thanks so much for the tips.
I will try your sway bar connection process and double check the holders when I have time to work on the car again. Thanks so much for the tips.
#3957
Originally Posted by ogreasurada
I dont quite get what that means?
#3959
Tech Elite
iTrader: (15)
Originally Posted by rcfiend
Hey guys I've haven't done nitro for sometime now, can someone tell me the easiest way to adjust the clutch play.
I know that I have heard some of the guys say that they put washers on the crank just before the first bearing that you would put on for the cluch bell. They put these washers on so the clutch bell will not touch the clutch shoe when the engine is idling I think. I do not do this but I hear that some do.
Last edited by THE DOCTOR; 03-23-2006 at 06:49 PM.
#3960
Originally Posted by ogreasurada
Yeah, been looking at the kawahara one for a while but they were too over-priced, the 3racing one looks promising but the quality is a little questionable to me since I have no exp with it. But so far I'm just trying to play with the car in stock form first to get the feel of it, and while most people dont seem to have problem with the single cam holder, there should be a cure for my car, I just need to take a better look at it.
3racing product is good enough for me.