Serpent 747 1/10 200mm touring @Nurnberg Toy Fair 2012
#541
Wide front bumper + slightly shaved axles are a must !!!!
#542
Tech Addict
Got to put this snake down on the track last night and man its getting good. I've been messing with Ackermann to try and keep the wheels as close to the same angle as possible which has helped my turning a great deal. I am currently using Ackermann 1 with the holes towards the end of the arm if anyone is curious.
I also decided to get the aluminum belt gears all the way around. I've had some issues with very small rocks getting stuck in them and causing belt issues. I'm hooping that the harder aluminum with allow them to fall out instead of get embedded in the plastic like they have been. We shall see. I'll play with it and see if there is any difference as far as smoothness of the car as that was brought up earlier.
Looking at a new Novarossi Keepon, Novarossi Flash or the Picco Torque. Any input?
I also decided to get the aluminum belt gears all the way around. I've had some issues with very small rocks getting stuck in them and causing belt issues. I'm hooping that the harder aluminum with allow them to fall out instead of get embedded in the plastic like they have been. We shall see. I'll play with it and see if there is any difference as far as smoothness of the car as that was brought up earlier.
Looking at a new Novarossi Keepon, Novarossi Flash or the Picco Torque. Any input?
#544
Got to put this snake down on the track last night and man its getting good. I've been messing with Ackermann to try and keep the wheels as close to the same angle as possible which has helped my turning a great deal. I am currently using Ackermann 1 with the holes towards the end of the arm if anyone is curious.
I also decided to get the aluminum belt gears all the way around. I've had some issues with very small rocks getting stuck in them and causing belt issues. I'm hooping that the harder aluminum with allow them to fall out instead of get embedded in the plastic like they have been. We shall see. I'll play with it and see if there is any difference as far as smoothness of the car as that was brought up earlier.
Looking at a new Novarossi Keepon, Novarossi Flash or the Picco Torque. Any input?
I also decided to get the aluminum belt gears all the way around. I've had some issues with very small rocks getting stuck in them and causing belt issues. I'm hooping that the harder aluminum with allow them to fall out instead of get embedded in the plastic like they have been. We shall see. I'll play with it and see if there is any difference as far as smoothness of the car as that was brought up earlier.
Looking at a new Novarossi Keepon, Novarossi Flash or the Picco Torque. Any input?
#545
747 trade....
Anybody got a extra 747 or kno sometime with one that wants to trade up for a capricorn lab co2.......car has been raced 4xs........747 would have to b new to equal value let me kno
#546
Tech Addict
I got my aluminum gears today and have them already installed. Car feels a lot smoother to me but I also replaced most of the drive train bearings. None of the bearings were shot but I like to keep mine top notch. I have a race tomorrow so that will be the true test on these gears. I'm thinking I added a bit of weight to the car but it is still balanced left to right so I'm not too worried about it.
#547
Tech Elite
iTrader: (46)
Fellas quick question, for you non bias racers, if there are any in here.........who has switched from a xray or Cap to 747? If u have...what r some differences if any? I ask cause a guy i race with has 747 n His car flat out can turn under anything! Not just my cap but all caps n xray too.....i watched a very good mugen driver make mistakes trying to keep up with this 747! The mtx5 just couldn't turn with the serp........
Overall I am very happy I switched.
#548
does anyone know the spring tension of the yellow 747 spring front and rear?
#549
Tech Addict
#550
#551
Tech Addict
.
Last edited by cho~ke; 07-18-2013 at 08:45 AM.
#553
Which engine to choose, please advise
wondering what engine you guys are using, please advise, thank you.
#554
Tech Addict
iTrader: (1)
Hi guys can u pls recommend any changes in my set up if necessary, my car is the fluorescent yellow car
http://m.youtube.com/watch?v=oyywh1lQ6Bo
http://m.youtube.com/watch?v=oyywh1lQ6Bo
#555
Where do you race in manila?
Hi guys can u pls recommend any changes in my set up if necessary, my car is the fluorescent yellow car
http://m.youtube.com/watch?v=oyywh1lQ6Bo
http://m.youtube.com/watch?v=oyywh1lQ6Bo