Kyosho v-one rrr
#9692
Tech Adept
Scott, it's the same pad for both of them, part # K1498
http://www.kfactoryracing.com/produc...1498&pageNum=4
from that web site:
Suitable for Many types of car:
Real Racing Brake Pad is not only can be installed for G4, but also for Kyosho series cars.
Kyosho V1 series R/ RR EVO/ RRR/ S
Kyosho FW05 Series R/ RR/ S/ T
Kyosho MP series MP7.5/ 777
http://www.kfactoryracing.com/produc...1498&pageNum=4
from that web site:
Suitable for Many types of car:
Real Racing Brake Pad is not only can be installed for G4, but also for Kyosho series cars.
Kyosho V1 series R/ RR EVO/ RRR/ S
Kyosho FW05 Series R/ RR/ S/ T
Kyosho MP series MP7.5/ 777
#9694
Setting Data
Hi does anyone have the setting data sheet in English, the one with the rollouts, I can download for a RRR EVO.
I have one but it's in Japanese as I bought the car from RC Champ in Japan (local hobby stores too expensive here in OZ). I have tried all the Kyosho website but can only find setup sheets.
I have one but it's in Japanese as I bought the car from RC Champ in Japan (local hobby stores too expensive here in OZ). I have tried all the Kyosho website but can only find setup sheets.
#9695
Tech Regular
iTrader: (5)
Hi does anyone have the setting data sheet in English, the one with the rollouts, I can download for a RRR EVO.
I have one but it's in Japanese as I bought the car from RC Champ in Japan (local hobby stores too expensive here in OZ). I have tried all the Kyosho website but can only find setup sheets.
I have one but it's in Japanese as I bought the car from RC Champ in Japan (local hobby stores too expensive here in OZ). I have tried all the Kyosho website but can only find setup sheets.
Gavin.
#9696
Tech Adept
#9700
Tech Adept
iTrader: (1)
Kawahara brake disk
I have just put in the kawahara brake disk and had to increase the width between the stock pads to 8mm because its twice as thick as the stock disk brake, which meant screwing out the 15mm screws a fair bit.
My concern is that the screws may be out too far even though the disk pads seem to be sturdy.
Has anyone has any problems with the kawahara brake disk and stock pads falling out during racing?
Should I use longer screws?
Can you get 20mm screws?
My concern is that the screws may be out too far even though the disk pads seem to be sturdy.
Has anyone has any problems with the kawahara brake disk and stock pads falling out during racing?
Should I use longer screws?
Can you get 20mm screws?
#9701
Is this what your after? I forget where I got it from, it looks like a scan to be honest.
Gavin.
Gavin.