Kyosho v-one rrr
04-14-2006, 05:00 PM
#5941
Originally Posted by ky-JOSH-o
Robert!! Talk to me dude. I'm online right now live and direct from Mandeville, Jamaica
Josh
Josh
04-14-2006, 05:02 PM
#5942
Originally Posted by robert maestrey
Thats exaclty it Im not going unless i have someone to wrok with... 
I'll be a good pit monkey.
04-14-2006, 05:19 PM
#5943
Tech Rookie
Robert, i'm loving the ride man and having lots of fun with the guys in Ja. Our little club is growing and we have an awesome track for a starter! Nice driver stand and all. You guys need to come down for a weekend!
04-14-2006, 05:21 PM
#5944
Tech Rookie
Francis, I hear you put in on them at the last State Race dude! Wicked!
Josh V
Josh V
04-14-2006, 05:23 PM
#5945
Tech Rookie
You gwan Doug, I have a can of Whoopass saving it for you! Stay there!
Josh 
Josh
04-14-2006, 06:05 PM
#5946
tick toc
04-14-2006, 06:07 PM
#5947
flag
anyone got a kyosho flag 
04-14-2006, 06:20 PM
#5948
Originally Posted by rmdhawaii
For the WCE I would suggest:
- Front suspension arms and hubs. L/R hubs are not interchangeable.
- Rear hubs. Also, replace the rear hub top screw with a longer one, because it might pull out on you in a crash.
- End cap set. Even if you adjust your steering end points, the shock endcaps still get scratched up a bit.
- Aluminum collar for the rear hub, in case the screw does pull out.
- Rear shock stay - Talk is they break. Mine hasn't, but I have an extra.
- Extra muffler bracket (only if you don't thread lock it down).
- Buy an allen head screw kit to build the kit (RC Screwz is probably a good choice. Guys?) The kit screws head strip too easily - you can use them as emergency spares. I didn't know better and used the kit screws.
- Hop-ups that are good to get from the start are the 3Racing throttle mixing arm, brake braket, brake bar and side stiffner.
The car is extremely durable. If you're a pretty clean driver, you may never need to use the spares.
- Front suspension arms and hubs. L/R hubs are not interchangeable.
- Rear hubs. Also, replace the rear hub top screw with a longer one, because it might pull out on you in a crash.
- End cap set. Even if you adjust your steering end points, the shock endcaps still get scratched up a bit.
- Aluminum collar for the rear hub, in case the screw does pull out.
- Rear shock stay - Talk is they break. Mine hasn't, but I have an extra.
- Extra muffler bracket (only if you don't thread lock it down).
- Buy an allen head screw kit to build the kit (RC Screwz is probably a good choice. Guys?) The kit screws head strip too easily - you can use them as emergency spares. I didn't know better and used the kit screws.
- Hop-ups that are good to get from the start are the 3Racing throttle mixing arm, brake braket, brake bar and side stiffner.
The car is extremely durable. If you're a pretty clean driver, you may never need to use the spares.
04-14-2006, 06:28 PM
#5949
check tonysscrews.com his kits are top notch. I had rcscrews in one of my cars and the heads were a little loose fitting in my tools and sometimes would strip. Also rcscrews are stainless so they arent magnetic.
04-14-2006, 07:12 PM
#5950
Originally Posted by performula
Will an RC Screwz kit from an MTX-3 work? Do you happen to know the part numbers for each part you mentioned?
http://www.kyoshoamerica.com/manuals/31258B.pdf
VZ206 Front Suspension Arm Set (RRR)
VZ201 Front Knuckle Arm (RRR) - aka Front Hubs
VZ210 Rear Suspension Arm Set (RRR)
VZ202 Rear Hub (RRR)
UM112 4.8mm Ball End Set
W0142 Aluminum Collar (Thick 2mm)
VZ231B Rear Shock Stay (RRR) [ VZ231 is not the same part ]
VZ087 Muffler Stay
I don't have a part number for a longer rear hub screw, but 3x20mm should be good enough.
3Racing Parts
V3R-021 Brake Bracket For V One RRR
V3R-022 Brake Bar For V One RRR
V3R-030 Side Stiffener For V One RRR ( R )
V3R-040 Throttle Mixing Arm For V One RRR
www.rcscrewz.com
kyo057 - Kyosho V-One-RRR/WC Stainless Steel Screw
04-14-2006, 07:13 PM
#5951
Originally Posted by PTP Racing
check tonysscrews.com his kits are top notch. I had rcscrews in one of my cars and the heads were a little loose fitting in my tools and sometimes would strip. Also rcscrews are stainless so they arent magnetic.
04-14-2006, 07:17 PM
#5952
Originally Posted by rmdhawaii
From the V1RRR WCE Manual:
http://www.kyoshoamerica.com/manuals/31258B.pdf
VZ206 Front Suspension Arm Set (RRR)
VZ201 Front Knuckle Arm (RRR) - aka Front Hubs
VZ210 Rear Suspension Arm Set (RRR)
VZ202 Rear Hub (RRR)
UM112 4.8mm Ball End Set
W0142 Aluminum Collar (Thick 2mm)
VZ231B Rear Shock Stay (RRR) [ VZ231 is not the same part ]
VZ087 Muffler Stay
I don't have a part number for a longer rear hub screw, but 3x20mm should be good enough.
3Racing Parts
V3R-021 Brake Bracket For V One RRR
V3R-022 Brake Bar For V One RRR
V3R-030 Side Stiffener For V One RRR ( R )
V3R-040 Throttle Mixing Arm For V One RRR
www.rcscrewz.com
kyo057 - Kyosho V-One-RRR/WC Stainless Steel Screw
http://www.kyoshoamerica.com/manuals/31258B.pdf
VZ206 Front Suspension Arm Set (RRR)
VZ201 Front Knuckle Arm (RRR) - aka Front Hubs
VZ210 Rear Suspension Arm Set (RRR)
VZ202 Rear Hub (RRR)
UM112 4.8mm Ball End Set
W0142 Aluminum Collar (Thick 2mm)
VZ231B Rear Shock Stay (RRR) [ VZ231 is not the same part ]
VZ087 Muffler Stay
I don't have a part number for a longer rear hub screw, but 3x20mm should be good enough.
3Racing Parts
V3R-021 Brake Bracket For V One RRR
V3R-022 Brake Bar For V One RRR
V3R-030 Side Stiffener For V One RRR ( R )
V3R-040 Throttle Mixing Arm For V One RRR
www.rcscrewz.com
kyo057 - Kyosho V-One-RRR/WC Stainless Steel Screw
04-14-2006, 08:22 PM
#5953
Originally Posted by JustRace
Robert...you should hire me for the week I'll be a good pit monkey.
I'll be a good pit monkey.Hire>>>
04-14-2006, 11:37 PM
#5954
Originally Posted by robert maestrey
Hire>>>
04-14-2006, 11:43 PM
#5955
Originally Posted by rmdhawaii
Went to the Web site and did not see a screw kit for the V1RRR WCE. Maybe I'm blind...
http://www.rcscrewz.com/product_info...roducts_id/627