European 2wd 1/8th pan car on-road Classic class
#3616
and not a luxury.... ....Davis and Schmaltz and Joe P are the real deal around here....
Ill settle for a wanna-be
#3617
Tech Master
Well, I wanna be like you man!! Wish I had your skills.
#3618
Not yet on eta
Just order and wait it will be here well before summer
Buggy 3 port will be a dog timing is all wrong Imo
They don't buy many so if it's on BO your going to have a better chance to get one for sure
I'll still see if I can nail down a eta
Just order and wait it will be here well before summer
Buggy 3 port will be a dog timing is all wrong Imo
They don't buy many so if it's on BO your going to have a better chance to get one for sure
I'll still see if I can nail down a eta
Jeff...did they say when they might be coming in???....Ive been searching for one...absolute hobbyz has one but high priced....I might try a Fusion buggy 3 port
http://www.houstonsengineservice.com...8f1b60c9fb34f5
did a couple more clean up cuts...
http://www.houstonsengineservice.com...8f1b60c9fb34f5
did a couple more clean up cuts...
#3619
#3620
maybe so, but after 50+ hours i don't wanna be LOL . then by sunday night i'm down there cutting away. need a read out on my mill but then i found a bigger one that has one, hmmm trying too do as much as i can at home without the over the top technology of work.
#3621
#3622
#3623
No no matter how many ports a onroad motor has better timing.
It's not a 7 lb buggy it doesn't need that much tq
#3625
Hmmm
If I have this right...your front end is basically aluminum. Oddly enough, so is mine, and Tom's will be too (with a redesign). Next year could get a little messy, aluminum vs. whatever they're making the other cars out of....lol.
#3626
check it.. In need of parts
#3627
Tech Regular
Dam it!
Thanks to Hitcharide, I found myself working on a MRP Pro 180. It has to be at least 20 years since I last had one. First I had to round up some SAE tools, just a few as this has to have been the easiest R/C car ever to work on, so simple. I wonder how we could have gotten away from this simple joy to racing the very complex cars of today? I'd bet the same drivers would be winning any how, maybe we'd all be richer.
Dam it! It happened just that fast, in no time I'm flashing back to the evil side of the MRP. I was being careful, yet the clutch E-clip took off and hide. Rats! I hate those things! Well over the years I have developed a very keen eye for finding small things, plus I had just swept the floor. Armed with a super LED light (didn't have those back then), I figured that E-chip didn't have a chance. After 20 minutes on hands and knees, I give up. All I found was how bad of a job I did sweeping.
So I have all sorts of X-ray, WRC, Mugen, Ass., and Motonica clips laying around, I'll show that e-chip, I'll replace it with a new metric chip! Not so easy. Every little mm chip I have seems so big now!
Back in the day, it seemed as if once you gave up, the E-clip would show itself. So I'm pretending to have given up!
Dam it! It happened just that fast, in no time I'm flashing back to the evil side of the MRP. I was being careful, yet the clutch E-clip took off and hide. Rats! I hate those things! Well over the years I have developed a very keen eye for finding small things, plus I had just swept the floor. Armed with a super LED light (didn't have those back then), I figured that E-chip didn't have a chance. After 20 minutes on hands and knees, I give up. All I found was how bad of a job I did sweeping.
So I have all sorts of X-ray, WRC, Mugen, Ass., and Motonica clips laying around, I'll show that e-chip, I'll replace it with a new metric chip! Not so easy. Every little mm chip I have seems so big now!
Back in the day, it seemed as if once you gave up, the E-clip would show itself. So I'm pretending to have given up!
#3628
#3629
Thanks to Hitcharide, I found myself working on a MRP Pro 180. It has to be at least 20 years since I last had one. First I had to round up some SAE tools, just a few as this has to have been the easiest R/C car ever to work on, so simple. I wonder how we could have gotten away from this simple joy to racing the very complex cars of today? I'd bet the same drivers would be winning any how, maybe we'd all be richer.
Dam it! It happened just that fast, in no time I'm flashing back to the evil side of the MRP. I was being careful, yet the clutch E-clip took off and hide. Rats! I hate those things! Well over the years I have developed a very keen eye for finding small things, plus I had just swept the floor. Armed with a super LED light (didn't have those back then), I figured that E-chip didn't have a chance. After 20 minutes on hands and knees, I give up. All I found was how bad of a job I did sweeping.
So I have all sorts of X-ray, WRC, Mugen, Ass., and Motonica clips laying around, I'll show that e-chip, I'll replace it with a new metric chip! Not so easy. Every little mm chip I have seems so big now!
Back in the day, it seemed as if once you gave up, the E-clip would show itself. So I'm pretending to have given up!
Dam it! It happened just that fast, in no time I'm flashing back to the evil side of the MRP. I was being careful, yet the clutch E-clip took off and hide. Rats! I hate those things! Well over the years I have developed a very keen eye for finding small things, plus I had just swept the floor. Armed with a super LED light (didn't have those back then), I figured that E-chip didn't have a chance. After 20 minutes on hands and knees, I give up. All I found was how bad of a job I did sweeping.
So I have all sorts of X-ray, WRC, Mugen, Ass., and Motonica clips laying around, I'll show that e-chip, I'll replace it with a new metric chip! Not so easy. Every little mm chip I have seems so big now!
Back in the day, it seemed as if once you gave up, the E-clip would show itself. So I'm pretending to have given up!
Lon....Is this the same chassis as yours??
http://www.ebay.com/itm/Vintage-1-8-...item41799500a6
#3630
This chassis is for the C510, MRPīs first 1/8 car. Not for the Pro 180.
I have several of the old E-clips, just not sure which size is needed.
Have to look at my C510, maybe itīs the same.
I have several of the old E-clips, just not sure which size is needed.
Have to look at my C510, maybe itīs the same.