Serpent 733 1/10 200mm touring
#2821
#2822
Tech Fanatic
iTrader: (7)
Hey guys, im having a little bit of trouble with my 733,
the problem is my acceleration in 1st gear, it just isnt snappy until it winds out a bit. the clutch is right so i know its not that.
i think it lies in my gear ratio
here it is
1st 17t-59t
2nd 22t-54
they top speed in second is good so i dont need to worry about that
would something like a 16t - 59t would be a better combo,
thanks
mitch
the problem is my acceleration in 1st gear, it just isnt snappy until it winds out a bit. the clutch is right so i know its not that.
i think it lies in my gear ratio
here it is
1st 17t-59t
2nd 22t-54
they top speed in second is good so i dont need to worry about that
would something like a 16t - 59t would be a better combo,
thanks
mitch
#2823
I'd choose to run 17-61 first as the 16t is a bit of a gear chewer if not precisely set.
The rest is in the clutch.
The rest is in the clutch.
#2824
i used to run 16t with the wc clutch and all i can say is to avoid using it
if you can. Needs to be changed frequently in order to avoid the spur from
going bad. After all, changing from 59 to 61 will give about the same result.
if you can. Needs to be changed frequently in order to avoid the spur from
going bad. After all, changing from 59 to 61 will give about the same result.
#2826
pinion before damanging the spur. Switched to 17T and spurs/pinions are like new.
#2829
For the guys who have never seen DLS in action:
http://www.youtube.com/watch?v=bAjGT...layer_embedded
http://www.youtube.com/watch?v=bAjGT...layer_embedded
#2834
Pretty expensive for 2 arms, some bearings and links.