Born an a Champion Pursuit SPT1!!!
#31
Hey all if you want to take a looking on the new Pursuit SPT1 we will be on Kamikaze race this came weekand at Cristal Park
#32
Hi All Where is all the SVM Drivers???
#33
Terry,
What date are you arriving for the Capitol Classic?
What date are you arriving for the Capitol Classic?
#35
#36
#38
the chocks came on the first model was defected I just made a new O-ring and it's perfect now
#39
#40
hi all
i have a question regarding the bearing excentrics in the rear hubs. the book suggests to use the neutral ones but what i would like to know is what i can expect to gain or loose by using the offset ones in each direction. i.e forward or back, up or down.
thanks in advance for any help with this
i have a question regarding the bearing excentrics in the rear hubs. the book suggests to use the neutral ones but what i would like to know is what i can expect to gain or loose by using the offset ones in each direction. i.e forward or back, up or down.
thanks in advance for any help with this
#41
back will make the car longer, maybe good for more stability, I have to test more only ran the car at one race in Brazil so far, but it was very good. C.T.
#42
for me if you have the first tight shocks you can take out 1 o-ring and put in a plastic spacer in place of the o-ring.
#44
Ok if you move the axel forward it will give you more dogbone sweep and it should have more forward traction, up or down will change the rollcenter like moving the rear lower pin up or down, so its good for fine tuning.
thaks again
#45
no problem we are here to help anyone
After finish the Kamikaze race the new Pursuit SPT1 made to de podium Chris Tosolini after lost the antena Tube finish in 3rd place the car was fest!!!!!!
After finish the Kamikaze race the new Pursuit SPT1 made to de podium Chris Tosolini after lost the antena Tube finish in 3rd place the car was fest!!!!!!