|
Originally posted by Sow&Steady You mean the outdrives? Hudy will have to start seeing a fall-off in M18 kit sales before even looking at making more Serpent hop-ups I think. someone here said they're not going to make anymore spring-steel products for Serpent. I think Serpent can find their own source for spring steel but apparently the Hudy ones are unique (or patented material). |
Re: Texas Biggie Setup
Originally posted by InitialD Has anybody seen Brandon McNally's setup yet at mytsn? Interesting that he used front solid axle. Looking at the setup with 45 degree front sway bar, the rear roll center, softer rear tire, it seems they were looking for rear traction and does not seem they need a lot of off power steering on the track. I may be wrong. Comments on the engine performance were "Very good Clutch set-up black weights non pivot with 3 holes 2.5mm 1/8 spring with black shoe." That would mean the flyweights mounted in between the flywheel poles, black shoe, the harder Centax II spring. But not too sure what "3 holes 2.5 mm means"... Does it mean 3 holes with 2.5 mm diameter were drilled per flyweight or each flyweight already had a hole (stock flyweight has one 2.5 mm diameter hole to pivot on the flywheel pole if I'm not mistaken)? lightter flyweight give softer acceleration. Are they racing in a very slipery surface?:confused: :confused: |
Originally posted by FW05R :eek: Well, perhaps Serpent is always late.:cry: :lol: :lol: :lol: I want my 725.:nod: |
Originally posted by Schrijver99 Serpent is going back to Hudy for parts but have to wait for Hudy to finish other productlines firts (new 1/8 offroad and others) |
Originally posted by InitialD Damn.:flaming: I'm really dissapointed and angry with Serpent. Where is my 725 as projected after 6 months? Where all my 710R, 715, 715R prior to the 725? :flaming: I need them and I need to make the 710 discontinued. It's getting really boring not being able to talk about a new Serpent car. :mad: Well, perhaps Serpent is always late.:cry: :lol: :lol: :lol: I want my 725.:nod: |
Re: Re: Texas Biggie Setup
Originally posted by markp27 Strangely enough the racer is marked as Art Carbonell :confused: |
Originally posted by InitialD Damn.:flaming: I'm really dissapointed and angry with Serpent. Where is my 725 as projected after 6 months? Where all my 710R, 715, 715R prior to the 725? :flaming: I need them and I need to make the 710 discontinued. It's getting really boring not being able to talk about a new Serpent car. :mad: Well, perhaps Serpent is always late.:cry: :lol: :lol: :lol: I want my 725.:nod: if that many new car come out, the wallet of a poor student will be drained:cry: :cry: they are Serpent, not Vempire:lol: :lol: |
Originally posted by InitialD Ahuh... So that's where our Hudy supplies went to.:mad: I guess we would have to resort to our next nearest Hudy parts from "Mr. Hudy" (or Mr. FW05R :lol: ) to get our supply of "Hudy" stuff wouldn't we?:cry: |
Originally posted by InitialD Damn.:flaming: I'm really dissapointed and angry with Serpent. Where is my 725 as projected after 6 months? Where all my 710R, 715, 715R prior to the 725? :flaming: I need them and I need to make the 710 discontinued. It's getting really boring not being able to talk about a new Serpent car. :mad: Well, perhaps Serpent is always late.:cry: :lol: :lol: :lol: I want my 725.:nod: |
Originally posted by InitialD Ahuh... So that's where our Hudy supplies went to.:mad: I guess we would have to resort to our next nearest Hudy parts from "Mr. Hudy" (or Mr. FW05R :lol: ) to get our supply of "Hudy" stuff wouldn't we?:cry: |
Originally posted by markp27 Are you sure you haven't still got that Ring, D :sneaky: ;) :D |
Mark, you are not coming to the MACH international anymore? I finally get my schedule rearranged to be able to race and you don't show?????
|
Originally posted by Julius Mark, you are not coming to the MACH international anymore? I finally get my schedule rearranged to be able to race and you don't show????? The crystal that fell out broke :( and somehow the day before my spare crystal also broke. So at the moment, I have no crystals and only a motor which need breaking in. I simply ran out of time to make the race in time, so I decided it wasn't going to be worth while. I'll will be coming up for a trip soon, when the circuit is a bit quieter - maybe see you then :D |
Originally posted by Julius Mark, you are not coming to the MACH international anymore? I finally get my schedule rearranged to be able to race and you don't show????? First time I'm seeing the "angry" side of Julius. Hey Julius, I think he expects you to pick him up via business class.:nod: :lol: |
Originally posted by markp27 I'll will be coming up for a trip soon, when the circuit is a bit quieter - maybe see you then :D |
| All times are GMT -7. It is currently 03:47 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.