Serpent 966
#2086
With Novarossi, you have to play with rotating the carb, and also rotating the ball link, but it can be done, without modification of anything.....
#2087
Registered User
thanx
Thanx everybody for the info, with the true motion the car really jumping...marvelous. ...
#2088
#2090
Registered User
thnx
Iam setting my car watching micheal at you tube how he set the car from part 1-part5,my car handling was good,using nitro x,engine temp is good,just talk to the hand to make the job done....i really like my car now....
#2091
#2092
Tech Adept
gday there guys,been a while,got another 996 recently and was looking for some tips if i could,looking threw the v2 manual just unsure on a few things,all the little orange washers and cones.where are they for,looked at some pics on the serpent website and it shows them under the rear upper wishbones,but in the 966 manual it says 2mm,also is the v2 default setup the same as the te setup other than the shock layout, the front upper arm position looks differnet on the te default setup compared to the v2 manual,it shows outsid ehole but inside on the setup sheet.
sorry for all the dumb questions again,cheers all for your help.
burty.
sorry for all the dumb questions again,cheers all for your help.
burty.
#2093
Tech Regular
iTrader: (2)
966 clearly dominated the field and wins Byron's Cup in Joliet!
WOW Paolo's car was awesome the whole 1 hour. Congratulations.
I wish all the 966TE fanatics like me could have seen this one hour show.
Impressive!
http://www.redrc.net/2012/06/morgant...rld-challenge/
I wish all the 966TE fanatics like me could have seen this one hour show.
Impressive!
http://www.redrc.net/2012/06/morgant...rld-challenge/
#2094
Tech Elite
iTrader: (10)
WOW Paolo's car was awesome the whole 1 hour. Congratulations.
I wish all the 966TE fanatics like me could have seen this one hour show.
Impressive!
http://www.redrc.net/2012/06/morgant...rld-challenge/
I wish all the 966TE fanatics like me could have seen this one hour show.
Impressive!
http://www.redrc.net/2012/06/morgant...rld-challenge/
#2095
Tech Addict
anyone have any experience replacing front universal pins? They seem to be larger in diameter then 3mm.Just wondering if anyones have replaced them and what u guys have used.Hudy pins 3m x 12m just slides in and out
#2097
Tech Regular
Can you post the link about the set up book please??
@HPC
Off power steering or turn in i suppose you mean.
Best not to mount to much forward just for turn in because you will get a nervous car on high speed. Maybe you can try the next;
- front stabi harder,
- front shock harder,
- front spring harder,
- rear droop less, let the rear lift with braking
- front droop more, let the front stick to the asfalt
- front lower rideheight,
- rear higher rideheight,
- front shore less (30),
- rear shore harder (37) in stead of 35,
- rear stabi harder (gets much more steering),
- rear shocks harder(spring, oil, or more vertical)
Try it and see what you like because there are also other effects wich maybe you don`t want. Hope it helps you. You can also
Download setup book from the best brand in the market with the best support
in the world.
Off power steering or turn in i suppose you mean.
Best not to mount to much forward just for turn in because you will get a nervous car on high speed. Maybe you can try the next;
- front stabi harder,
- front shock harder,
- front spring harder,
- rear droop less, let the rear lift with braking
- front droop more, let the front stick to the asfalt
- front lower rideheight,
- rear higher rideheight,
- front shore less (30),
- rear shore harder (37) in stead of 35,
- rear stabi harder (gets much more steering),
- rear shocks harder(spring, oil, or more vertical)
Try it and see what you like because there are also other effects wich maybe you don`t want. Hope it helps you. You can also
Download setup book from the best brand in the market with the best support
in the world.
#2098
i can`t quote a other brands setup book,on this thread but browse the serpent site. Its bound to be there somewhere downloadable.
i`ve downloaded the 10th scale from the serpent site before it was the 720 i think.
EDIt http://www.serpent.com/product/903008/downloads/
here you go the 960 setup book from serpent. be quick before the remove it.
i`ve downloaded the 10th scale from the serpent site before it was the 720 i think.
EDIt http://www.serpent.com/product/903008/downloads/
here you go the 960 setup book from serpent. be quick before the remove it.
#2099
Tech Regular
Thank you!
It's a good read.
It's a good read.
#2100
Has anyone tried to put an angle on the upper bracket by adding or removing shims? Can anyone tell me what that would do to the car?