4LikesKyosho FW-05R
02-11-2004, 06:55 PM
#496
stripping gears
hi guys.
to all you people stripping the ring gears...............have you shimmed it up so as it doesnt bind...it should run SMOOTH....i have had my fw-05r for a while with the one way hardened gears etc.......i use the hard clutch spring( standard in the kit) with the red shoe..i run on short and long tracks and have not had a problem with ANY of the gears...you have to make certain that the mesh is right.........................read the instructions...........i have run the kyoshos since the first "R" model..i have never stripped gears...except spur gears....................i run at the top of rc nitro.jp 5 port....so i havnt a power issue...
mike
to all you people stripping the ring gears...............have you shimmed it up so as it doesnt bind...it should run SMOOTH....i have had my fw-05r for a while with the one way hardened gears etc.......i use the hard clutch spring( standard in the kit) with the red shoe..i run on short and long tracks and have not had a problem with ANY of the gears...you have to make certain that the mesh is right.........................read the instructions...........i have run the kyoshos since the first "R" model..i have never stripped gears...except spur gears....................i run at the top of rc nitro.jp 5 port....so i havnt a power issue...
mike
Last edited by mikecatts; 08-13-2010 at 02:28 PM.
02-11-2004, 07:03 PM
#497
Originally posted by vones
the ring gears are out ...I hve them in my 05R...but the pinions......
the ring gears are out ...I hve them in my 05R...but the pinions......
02-11-2004, 07:59 PM
#498
Guys,
Little confused about something. I buy a lot of my parts here in the states frome Tower Hobbies. My question is, which chassis is the option chassis? The VS013 or the VSWOO1. I was understanding the VSW001 is the option. I think Tower hobbies has it posted incorrectly.
Thanks
Little confused about something. I buy a lot of my parts here in the states frome Tower Hobbies. My question is, which chassis is the option chassis? The VS013 or the VSWOO1. I was understanding the VSW001 is the option. I think Tower hobbies has it posted incorrectly.
Thanks
02-11-2004, 08:29 PM
#499
Originally posted by coldeye
Guys,
Little confused about something. I buy a lot of my parts here in the states frome Tower Hobbies. My question is, which chassis is the option chassis? The VS013 or the VSWOO1. I was understanding the VSW001 is the option. I think Tower hobbies has it posted incorrectly.
Thanks
Guys,
Little confused about something. I buy a lot of my parts here in the states frome Tower Hobbies. My question is, which chassis is the option chassis? The VS013 or the VSWOO1. I was understanding the VSW001 is the option. I think Tower hobbies has it posted incorrectly.
Thanks
02-12-2004, 04:03 AM
#500
Tech Master
iTrader: (8)
Originally posted by Sp Racer
Gav,
No, but I think they will definitely help the problem.
Thanks for your advice guys, I have raced on-road electric for many years and I am aware of the driving style required, the biggest problem is that on both the tracks I race on, there is very little traction.
I also managed to adjust my VoneRR to brake without going sideways on these same tracks...
Gav,
No, but I think they will definitely help the problem.
Thanks for your advice guys, I have raced on-road electric for many years and I am aware of the driving style required, the biggest problem is that on both the tracks I race on, there is very little traction.
I also managed to adjust my VoneRR to brake without going sideways on these same tracks...
02-12-2004, 04:05 AM
#501
Tech Master
iTrader: (8)
Re: stripping gears
Originally posted by mikecatts
hi guys.
to all you people stripping the ring gears...............have you shimmed it up so as it doesnt bind...it should run SMOOTH....i have had my fw-05r for a while with the one way hardened gears etc.......i use the hard clutch spring( standard in the kit) with the red shoe..i run on short and long tracks and have not had a problem with ANY of the gears...you have to make certain that the mesh is right.........................read the instructions...........i have run the kyoshos since the first "R" model..i have never stripped gears...except spur gears....................i run at the top of rc nitro.jp 5 port....so i havnt a power issue...
mike
hi guys.
to all you people stripping the ring gears...............have you shimmed it up so as it doesnt bind...it should run SMOOTH....i have had my fw-05r for a while with the one way hardened gears etc.......i use the hard clutch spring( standard in the kit) with the red shoe..i run on short and long tracks and have not had a problem with ANY of the gears...you have to make certain that the mesh is right.........................read the instructions...........i have run the kyoshos since the first "R" model..i have never stripped gears...except spur gears....................i run at the top of rc nitro.jp 5 port....so i havnt a power issue...
mike
02-12-2004, 04:19 AM
#502
kyosho parts singapore
hi fellow racers..
just wanting to know if any body knows where i can buy kyosho parts, kits in singapore. who will sell via the internet..the only place i have found is ROTRCOM.. are there others?
mike
just wanting to know if any body knows where i can buy kyosho parts, kits in singapore. who will sell via the internet..the only place i have found is ROTRCOM.. are there others?
mike
02-12-2004, 04:21 AM
#503
who?
whos this .."jordanc"
02-12-2004, 05:02 AM
#506
Originally posted by JordanC
VEEEERRRYYYY Bent!
VEEEERRRYYYY Bent!
02-12-2004, 05:04 AM
#507
bent?
i know the young lad who was at robs?..correct
02-12-2004, 05:05 AM
#508
taylor
whos "taylors racing"..have we met?