HPI R40 Nitro Car Forum
#2461
Tech Apprentice
Originally posted by fastharry
http://www2.towerhobbies.com/cgi-bin...?&I=LXVB85&P=7
there ya go...Enjoy the car...
http://www2.towerhobbies.com/cgi-bin...?&I=LXVB85&P=7
there ya go...Enjoy the car...
those are for the RS4 series. Are they the same?
#2462
Originally posted by Frag
AMGRacer,
do you where to get those balls? Do you have a link? I found some GPM, but alloy, not titanium.
AMGRacer,
do you where to get those balls? Do you have a link? I found some GPM, but alloy, not titanium.
http://www.gpmracing.com.hk/car/page/r40_1.jpg
These are the ones I have. I assume they are Titanium since it says so But they are ultra cheap so mayby not a very high percentage.
#2463
Originally posted by Frag
FastHarry,
those are for the RS4 series. Are they the same?
FastHarry,
those are for the RS4 series. Are they the same?
#2464
Tech Apprentice
Guys,
which is a good no hassle starter box for the R40? I never used one, so I don't really know what I have to search for.
which is a good no hassle starter box for the R40? I never used one, so I don't really know what I have to search for.
#2465
Tech Master
Ofna Pink 12v Starter Box.
Pros:
Small Narrow Size
Gobs of torque/power
12v motor
Cons:
Heavy w/ 12v battery
Instructions suck
or...
Ofna Black Universal 2 550 motors starter box
Pros:
Lightweight
Can put more powerful motors inside
Cons:
May not be powerful enough to start fresh engines
Instructions suck
Pros:
Small Narrow Size
Gobs of torque/power
12v motor
Cons:
Heavy w/ 12v battery
Instructions suck
or...
Ofna Black Universal 2 550 motors starter box
Pros:
Lightweight
Can put more powerful motors inside
Cons:
May not be powerful enough to start fresh engines
Instructions suck
#2466
Tech Master
Originally posted by AMGRacer
Here you go:
http://www.gpmracing.com.hk/car/page/r40_1.jpg
These are the ones I have. I assume they are Titanium since it says so But they are ultra cheap so mayby not a very high percentage.
Here you go:
http://www.gpmracing.com.hk/car/page/r40_1.jpg
These are the ones I have. I assume they are Titanium since it says so But they are ultra cheap so mayby not a very high percentage.
Ill take the stock R40 over that anyday!
#2467
Tech Addict
yes amg please tell everyone where we can find stronger balls........
#2468
Originally posted by LILROBBY
yes amg please tell everyone where we can find stronger balls........
yes amg please tell everyone where we can find stronger balls........
#2469
im afraid of using gpm parts
i had a ntc3 and the titanium pillow balls snapped way too easily
i am afraid gpm may be the same story
the mugen ones are indestructable even the steel ones will never break my friend has the titanium ones for mtx2 in his mtx3 hes been using them for more than 3 years and trust me he has tested them
i had a ntc3 and the titanium pillow balls snapped way too easily
i am afraid gpm may be the same story
the mugen ones are indestructable even the steel ones will never break my friend has the titanium ones for mtx2 in his mtx3 hes been using them for more than 3 years and trust me he has tested them
#2470
Tech Champion
iTrader: (17)
I cannot say the Titanium pivot balls for R40 cause I never got one....but I can tell alot about the GPM TITANIUM in general...
One word.....made in china and their definitely of TITANIUM is equal to the USA called "WATER mixed with plastic plus 1% Titanium".....
I still remember the NTC3 Titanium Universal...."3 times stronger..."........RIGHT....those titanium garbage can't even last more then 5 minutes in qualifier...
GPM sucks even though I am born in HK...GPM are pretty much the worst RC products in history....but of course, they have the best advertizing and best packaging.
But again, their pivot ball might be better, but on NTC3, they changed the thread from standard to metric and ppl in state brought those pivot later realzied that it cannot be thread into the NTC cause they are metric....
One word.....made in china and their definitely of TITANIUM is equal to the USA called "WATER mixed with plastic plus 1% Titanium".....
I still remember the NTC3 Titanium Universal...."3 times stronger..."........RIGHT....those titanium garbage can't even last more then 5 minutes in qualifier...
GPM sucks even though I am born in HK...GPM are pretty much the worst RC products in history....but of course, they have the best advertizing and best packaging.
But again, their pivot ball might be better, but on NTC3, they changed the thread from standard to metric and ppl in state brought those pivot later realzied that it cannot be thread into the NTC cause they are metric....
#2471
Tech Adept
dude that is way harsh, i wonder if gpm is aware of how many people thrash their products cause this certainly is not the first time i've herd of this.
#2472
where can i buy the rear carbon shock tower ? the HPI one
#2474
haha.. i shoulda got pics.. what happened is we had a straight away right next to a set of ramps.. me not paying attention passing everyone in front of me.. well.. lets just say.. i didnt look ahead and gunned it.. i mean WOT.. at lets say 35 mph..
LAUNCHED the car about 20 feet up in a LARGE arch.. like 1/8th style buggy jump..
landed on the rear shock tower at an angle, BROKE NOTHING!!! bent the shock tower though.. and thats all!!
im amazed.. i have like 15 peoples witness to this .. now they know the R40 is a survivor
LAUNCHED the car about 20 feet up in a LARGE arch.. like 1/8th style buggy jump..
landed on the rear shock tower at an angle, BROKE NOTHING!!! bent the shock tower though.. and thats all!!
im amazed.. i have like 15 peoples witness to this .. now they know the R40 is a survivor