1/8th scale Motonica
#436
Suspended
did you fix your problem?
#437
Tech Rookie
nar havnt fixed the problem yet.
leaving it for the night,
gonna take a hard look at the instruction booklet tomorrow and see again if i missed anything
leaving it for the night,
gonna take a hard look at the instruction booklet tomorrow and see again if i missed anything
#438
I am also building a P8R and to me it looks like part 06-011a is reversed on the left side? Its kind of hard to see from a picture so I added a picture of the part i mean.
#439
Tech Apprentice
switch sides of the arms .You have upper arms on the wrong side.Switch the left for right and tell me how it goes.
#440
Tech Rookie
hey scottyoo
im at work now, u got me thinking!!
might have to skive off work a few hours early
im at work now, u got me thinking!!
might have to skive off work a few hours early
#441
Tech Rookie
hey guys, it worked!!!!
thanks everyone for advice
one question, how do u build ur shockers, so that they get the same rebound
thanks
thanks everyone for advice
one question, how do u build ur shockers, so that they get the same rebound
thanks
#442
Tech Master
iTrader: (7)
I build the shocks to have a little bit of rebound and try to get all 4 to rebound the same. Oil the o-rings before installing them. Make sure to clean off all burrs from the pistons. I found the suggested length for the shocks to be a bit short as I could not tighten the ball end all the way on, so mine are a bit longer, but make sure they are equal left and right.
At our last club race (temporary track, gritty surface, VHT applied, super high grip) I ran black springs in front, silver in rear, 1 hole piston front, 2 hole piston rear, 500 all around.
At our last club race (temporary track, gritty surface, VHT applied, super high grip) I ran black springs in front, silver in rear, 1 hole piston front, 2 hole piston rear, 500 all around.
#443
Tech Rookie
MOTONICA USA CONTACT INFO
I was told by a little birdie that someone could not get a hold of me. So I wanted to post the info here just incase there was a problem with the website. Our hours are as follow's monday thru friday 9am to 6pm.
Thursday 9am to 7pm and saturday 9am to 4pm.
Our phone number is 860-395-0236.
We still have great selection of everything in stock including kits.
Our web site is WWW.MOTONICAUSA.COM
If you have any questions please feel free to contact me by either phone or email.
Thanks Paul
WWW.MOTONICAUSA.COM
Thursday 9am to 7pm and saturday 9am to 4pm.
Our phone number is 860-395-0236.
We still have great selection of everything in stock including kits.
Our web site is WWW.MOTONICAUSA.COM
If you have any questions please feel free to contact me by either phone or email.
Thanks Paul
WWW.MOTONICAUSA.COM
#444
#445
Suspended
#446
Tech Apprentice
#447
#448
Not allowed to post prices on RCtesc. Go to Tools and miscellaneous on www.ybslowinc.com for pricing. I do not have a ton of these so get them while they are available.
#449
Tech Apprentice
#450