Yokomo GT-4???
#256
Were running the long track with Tourers tomorrow for the first time. Should be a very interesting day as the state titles will more than likely run on the long track.
Also running the new Rossi R12 Pixy Black in the Yokomo.
So far seems like a good engine with good speed.
Also running the new Rossi R12 Pixy Black in the Yokomo.
So far seems like a good engine with good speed.
#257
STINKING RAIN
#258
We got snow if you want that.
#259
Hey do any of you smokers have a penquin radio tray you are not using or don't like. I have had it with the yokomo tank. I am going to redesign the top plate to support a V1R or Reflex tank in the center of the chassis with an brick battery pack between it and the motor. should bring the weight even more to the center of the chassis. and with the fuel in the middle no weight off center considerations. Plus I can shove those TERRIBLE Tanks up somebodies (thats enough, you get the picture). I'll buy if you hate it (5-10 bucks) but if you can loan it to me I'll be able to set it up. If you want I'll see if it can be modded and send it back to you modded. your choice. Thanks for the help.
#260
Coning tires - GT4R
Boom
Believe it or not, i'm running 3-1/2 deg negative rear camber. tried 2deg and was still coning. 3-1/2 seems to work fine - even wear. 1-2 deg rear toe in depending on surface bite.
shock oil ranging from 70-80 trinity. spring yellow on both ends.
last race i had problem with 2-speed. someone told me to replace stock spring with something harder. anybody ran into same problem?
Believe it or not, i'm running 3-1/2 deg negative rear camber. tried 2deg and was still coning. 3-1/2 seems to work fine - even wear. 1-2 deg rear toe in depending on surface bite.
shock oil ranging from 70-80 trinity. spring yellow on both ends.
last race i had problem with 2-speed. someone told me to replace stock spring with something harder. anybody ran into same problem?
#261
You running upstops?
#262
Re: Coning tires - GT4R
Originally posted by SenayanBunch
last race i had problem with 2-speed. someone told me to replace stock spring with something harder. anybody ran into same problem?
last race i had problem with 2-speed. someone told me to replace stock spring with something harder. anybody ran into same problem?
#264
Originally posted by black-knight
Thanks for the info, yes i have NTC3 but i'm greedy and want both!
Thanks for the info, yes i have NTC3 but i'm greedy and want both!
people in HK are pushing me into NTC3 by saying nice things about it. is it really?
i am quite happy with my GT4R. Despite the fact that i feel there's some truth to when people call it broke-omo. i mean when i crashed, there's more to fix than when i crash my v-1-r. of course i don't crash the same ways.