new ofna DM1 pics and thoughts :):)
#556
Tech Rookie
Picco P9
Hey love this tread a lot of good information. I just purchased a Picco .21 P9 Evo3 to throw into my DM1 and was looking for suggestions on pipes. Thanks.
#557
Tech Initiate
Center universal drive shafts
Anybody know some center universal drive shafts that would fit the 1/7 dm-1? I came across these, tower hobbies says they are 115m in length http://www3.towerhobbies.com/cgi-bin...?&I=LXTVA8&P=7
These look a little longer http://www3.towerhobbies.com/cgi-bin...?&I=LXLMZ6&P=7
These look a little longer http://www3.towerhobbies.com/cgi-bin...?&I=LXLMZ6&P=7
Last edited by StaX64; 04-23-2010 at 01:24 AM.
#558
Suspended
For the guys looking for a good alternative body to run on the DM1
The Ipanema Warrior bodies are now available at www.maxvelocityracing.com
Fits both DM1-Spec and DM-1 1/7 Scale. Reason being that the rear quarter panels are extended to all variable chassis lenth.
The Ipanema Warrior bodies are now available at www.maxvelocityracing.com
Fits both DM1-Spec and DM-1 1/7 Scale. Reason being that the rear quarter panels are extended to all variable chassis lenth.
#559
Tech Addict
iTrader: (42)
Handling Problem
So, I got a new DM-1 Spec RTR a few weeks go.
Already put over 1/2 gallon through it too.
While I was out driving one afternoon and developed a handling problem, so I took it apart to track the problem down.
Could this be the problem?
I had a receiver pack go and the car launched a curb, flew about 30 feet in the air, nose planted in a neighbors yard and finally came to rest another 25-30ft away...after tumbling and flipping several times.
I was very lucky that nothing (or nobody) was hurt or damaged.
I wont be doing that anymore.
The only thing that happened was the chassis bent and the rear upper hinge pin holder broke.
On a happy ending though, it finally gave me the opportunity to do this...
I have the 7075 King Headz chassis coming to replace the stock one, then I will source parts to have 2 DMs...1 electric and 1 nitro.
I love this car!
Already put over 1/2 gallon through it too.
While I was out driving one afternoon and developed a handling problem, so I took it apart to track the problem down.
Could this be the problem?
I had a receiver pack go and the car launched a curb, flew about 30 feet in the air, nose planted in a neighbors yard and finally came to rest another 25-30ft away...after tumbling and flipping several times.
I was very lucky that nothing (or nobody) was hurt or damaged.
I wont be doing that anymore.
The only thing that happened was the chassis bent and the rear upper hinge pin holder broke.
On a happy ending though, it finally gave me the opportunity to do this...
I have the 7075 King Headz chassis coming to replace the stock one, then I will source parts to have 2 DMs...1 electric and 1 nitro.
I love this car!
#562
Tech Adept
iTrader: (4)
this weekend i had blast with my dm-1 spec...i was worried about my engine choice because my friend picco p9 hauls...i must say that the GO7 port rips in this car...right now im using stock setup and i notice front tires little worn faster than the rear any new setups?
#563
ofna red dot
Has anyone used the ofna red dot foam tires yet and also what happen to the GQ foam tires the ones from competition rc are not made the same there pieced together now
#565
I have a set. Unfortunately I have not had a chance to run them yet. They have a much taller overall diameter so I am going to cut them down before I run them. I only bought them because the price was right and I really like the look of the wheels. Any racing I do will be with Ipanema rubber slicks.
#566
I have a set. Unfortunately I have not had a chance to run them yet. They have a much taller overall diameter so I am going to cut them down before I run them. I only bought them because the price was right and I really like the look of the wheels. Any racing I do will be with Ipanema rubber slicks.
#567
Tech Regular
iTrader: (4)
GT car can be added to the n,c. state onroad race!!
IF ANY GUYS WANT TO RACE AT THE N.C. STATE RACE FOR THE GT CLASS DM-1'S OR IGT,S IT CAN BE ADDED AS LONG IF WE CAN CAN GET 10 OR MORE TO PARTICIPATE, AND TO MAKE SURE THERES ENOUGH MARSHALLS FOR THE NEXT RACE THAT FOLLOWS!!!!! EVEN THOUGH ITS KINDA CLOSE TO THE RACE DATE US GT GUYS CAN MAKE IT HAPPEN FOR SURE!!!! IF U ARE INTERESTED PLEASE SIGN UP ON THE.....N.C,STATE RACE THREAD UNDER THE RACING FORUM!!!!! LETS GET IT IN FOR SURE!!!!
GT 1/8TH IS A CLASS TOO AND IS VERY EXCITING!
GT 1/8TH IS A CLASS TOO AND IS VERY EXCITING!
#569
Tech Addict
I have the maxvelocityracing carbon front one and I didn't do anything special. If you use the stock rear in front then you will need longer shocks. I hope this answered your question.
#570
I lengthened mine 2-3 threads with the max velocity tower.