Serpent 720
#3751
I have the stock gearing 1st gear (59T/17T) and second (57T/23T) on my 720 and i would like to convert to the WC transmission. So all i need is a clutch bell and pinions/spurgears?
Also i noticed they dont make the same gearing for the second in WC. Would the closest to my stock be (56T/23T)???
Anyone knows if this will mesh? Anyone have a chart?
Also i noticed they dont make the same gearing for the second in WC. Would the closest to my stock be (56T/23T)???
Anyone knows if this will mesh? Anyone have a chart?
#3752
Tech Elite
iTrader: (1)
Quick question
Before i use the setup station on the car. I have to set the ride
height. I never used the green setup wheels without the tires that
came in the serpent kit. And my friend says he uses that to set his ride
height in his NT1.
How u do it?
I basically use a new set of tires. Is that the purpose of the green
wheels? Wouldnt his way be inaccurate?
Before i use the setup station on the car. I have to set the ride
height. I never used the green setup wheels without the tires that
came in the serpent kit. And my friend says he uses that to set his ride
height in his NT1.
How u do it?
I basically use a new set of tires. Is that the purpose of the green
wheels? Wouldnt his way be inaccurate?
Last edited by rcabj; 06-29-2008 at 12:31 AM. Reason: spelling
#3753
Hello all,
I would appreciate if you explained the difference in car handling between the plastic and the metallic X bracket.
Thanks in advance
Dimitris
I would appreciate if you explained the difference in car handling between the plastic and the metallic X bracket.
Thanks in advance
Dimitris
#3755
Tech Elite
I use the aluminum brace and cut it in the middle. I think it gives the correct amount of flex and helps the car steer more, but stay stable. I also do not use the middle screw on the left graphite brace that the side belt tensioner is on. I cut that area away so the graphite does not touch the alum brace. Hope I explained myself well enough for people.
DJ Apolaro
DJ Apolaro
#3756
Thank you guys.
#3757
Tech Adept
iTrader: (-1)
I use the aluminum brace and cut it in the middle. I think it gives the correct amount of flex and helps the car steer more, but stay stable. I also do not use the middle screw on the left graphite brace that the side belt tensioner is on. I cut that area away so the graphite does not touch the alum brace. Hope I explained myself well enough for people.
DJ Apolaro
DJ Apolaro
#3758
which part of the graphite? top or bottom at the alu brace or to the rear left bulkhead?? thanks
I use the aluminum brace and cut it in the middle. I think it gives the correct amount of flex and helps the car steer more, but stay stable. I also do not use the middle screw on the left graphite brace that the side belt tensioner is on. I cut that area away so the graphite does not touch the alum brace. Hope I explained myself well enough for people.
DJ Apolaro
DJ Apolaro
#3759
Tech Adept
I use the aluminum brace and cut it in the middle. I think it gives the correct amount of flex and helps the car steer more, but stay stable. I also do not use the middle screw on the left graphite brace that the side belt tensioner is on. I cut that area away so the graphite does not touch the alum brace. Hope I explained myself well enough for people.
DJ Apolaro
DJ Apolaro
thus, you cut the "X" in the middle ? and how many mm do you cut it ?
and also, why do you cut the graphite ? what is the effect ?
thank you very much for your advices!
Last edited by Manu_05'; 07-01-2008 at 10:00 AM.
#3762
Tech Adept
thanks
you cut just the left of the graphite and not the right ?
you cut just the left of the graphite and not the right ?
#3763
Tech Elite
They do not respond the same. Trust me when I tell you I have tried every way possible and the way I use it works best for me. I find that I am able to carry more corner speed with stability my way. The diagram that was posted with the graphite cut is not the way I use it. I tried that way and liked mine better. I cut the graphite at the upper part of the aluminum brace. It is still connected in the bottum and rear. Hope this helps.
DJ Apolaro
#3764
Tech Elite