|
looks nice
|
Everyone I will say this about the INTECH. I had lost intrest in running buggy and was running only truggy and short course. After seeing the BR 5 and tring a couple out I decided it was time to put my hat back into the buggy run. I was never much of a driver just out to have fun. At the dialed race in Shreveport I bumped into the B and was actually on the way to win the B until I got tangled in traffic which was my fault. Before I was a bottom B mid C finisher in buggy class. Working with Russ and Hunter and the advice they pass along and help they offer I have actually enjoyed driving buggy again. Between New Generations and INTECH I truely hope this is a buggy that can knock the big names off the podium. I know of 1 driver that pilots 1 that can do it...
AIN'T THAT RIGHT "CUPCAKE" !!!!!!:sneaky::lol: |
Originally Posted by bobbyc1127
(Post 11055465)
These tires have done real well for me when I use them. ACTUALLY on a hard pack track with a good blue groove I will use a older set to run. These tires are to INTECH what the CITYBLOCK and CALIBER are to AKA and PROLINE.
I do use the red AKA insert in the tires which allow for better performance. How long they will last you is all depending on how hard you are on the trigger. Check them out. Ya won't be sorry. http://newgenerationdistribution.com...BR-BB1-S-A.htm |
Originally Posted by SureShotImages
(Post 11058788)
Sorry bud, these tires are not Intech's. OFNA puts these tires on every 80% race roller. They are the same EXACT things as the ofna's. They also, in my opinion, do not last very long at all. Super hard and are not really meant for racing...
:D Back to the buggy please, like we said before looking forward to getting it here. Thanks |
I'm getting stoked about the new version INTECH has to send us. I know Russ and Hunter has worked close with them as well. It seems INTECH is WILLING to listen to input from drivers of the buggy. I really believe if people just try the buggy they will like it.
As importers Russ and Hunter know the buggy inside out. And if you have an issue you have 2 great sources of info to draw from to ask questions to. |
where can I buy one?
|
]
Originally Posted by sprintdude
(Post 11067985)
where can I buy one?
|
Thanks Bobby,
Our pre-production BR6 has shipped, look for the build soon. The production units should be ready to ship very soon! :sneaky: |
I really like the way it looks and I'm not a buggy owner currently but when I finally decide to enter the buggy world definitely have to consider this
|
Originally Posted by rustlererad3
(Post 11074959)
I really like the way it looks and I'm not a buggy owner currently but when I finally decide to enter the buggy world definitely have to consider this
|
br6
is it with rear kick-up?
|
Originally Posted by chevydc44
(Post 11055048)
Does anybody know what tires are on the buggy thanks
|
Originally Posted by wires37
(Post 11095723)
is it with rear kick-up?
|
he means, rear kick-up bended in the chassisplate .. no
|
BR6
Hunter and I just got back from the track, and the new buggy is really Good!
A lot more steering, better geometry, fuel economy! The chassis is longer than the STD br5, but the engine was move back for more on power traction, and with the new radio tray made the steering much better! MORE TO COME! |
| All times are GMT -7. It is currently 09:37 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.