BCE racing custom chassis thread
04-07-2014, 06:06 PM
#1951
Hi Guys sorry been away for pre race season preparations
Some new News We welcome Billy Fischer
as one of our new Team Racing members/Developers.
Billy Has been racing our 014 Losi buggy and truggy.
We spoke to him regarding his feelings on the new 014 Chassis
and he was very positive on his track results, he is now working on some new
set ups that we will be posting here soon.
Also some Exciting new updates/News for the upcoming Silver State Race.
Hi We are looking at some further options as the car is so new we are getting
new data from the racers we will keep everyone posted as the protos
are getting their work outs
Thank you Nabs for the update
Thank you Hkem, for the chat as well looking forward to your report
**NOTE**
Guys regarding Business questions please contact us direct
via our online site. ,
and most of the racers we speak to, they really don't like drama,
this is really evident as through out the years we have seen a major decline in the top level pros posting here on the Tec.
All of those that know us through the years will back us that we will get things handled. As we are a small USA Based custom machine shop that strictly caters to the RC racers Pro and Privateers that demand top quality parts for their Cars or trucks.
All Pms here are answered, and Emails are sent out.
Every once in a while we will get a bug and things can slip away, with many orders that are being completed.daily things can happen.
But we will make sure it gets resolved.
we are not a liberty to post anything here but updates and news.
we will not respond To any business here.as this really dose not belong here.
Msg have been sent to those that have indicated they have had a issue
we will always make sure complete resolution for any problem.
Now going on to 12 yrs of business for us ..
Have a comment email us direct...
Thank you for your understanding
Some new News We welcome Billy Fischer
as one of our new Team Racing members/Developers.
Billy Has been racing our 014 Losi buggy and truggy.
We spoke to him regarding his feelings on the new 014 Chassis
and he was very positive on his track results, he is now working on some new
set ups that we will be posting here soon.
Also some Exciting new updates/News for the upcoming Silver State Race.
Hi We are looking at some further options as the car is so new we are getting
new data from the racers we will keep everyone posted as the protos
are getting their work outs
Thank you Nabs for the update
Thank you Hkem, for the chat as well looking forward to your report
**NOTE**
Guys regarding Business questions please contact us direct
via our online site. ,
and most of the racers we speak to, they really don't like drama,
this is really evident as through out the years we have seen a major decline in the top level pros posting here on the Tec.
All of those that know us through the years will back us that we will get things handled. As we are a small USA Based custom machine shop that strictly caters to the RC racers Pro and Privateers that demand top quality parts for their Cars or trucks.
All Pms here are answered, and Emails are sent out.
Every once in a while we will get a bug and things can slip away, with many orders that are being completed.daily things can happen.
But we will make sure it gets resolved.
we are not a liberty to post anything here but updates and news.
we will not respond To any business here.as this really dose not belong here.
Msg have been sent to those that have indicated they have had a issue
we will always make sure complete resolution for any problem.
Now going on to 12 yrs of business for us ..
Have a comment email us direct...
Thank you for your understanding
04-08-2014, 07:07 PM
#1952
Gearing up for racing season, replacing my RC8T chassis, just realized ive been running it since silverstate 2012. These things last forever. See you guys at Silver State. Expect some big things from BCE this year.
04-09-2014, 12:41 PM
#1953
Tech Rookie
new order on the road for my strr evo
I put the chassis on my tki3 and wow ,its like a "super weapon " now
Cant wait to get my chassis for my truck
I put the chassis on my tki3 and wow ,its like a "super weapon " now
Cant wait to get my chassis for my truck
04-12-2014, 05:26 PM
#1954
Finally had a chance to run the kyosho chassis. Ran 2 quarts in practice and...WOW!
The amount of corner speed this chassis provides is FAR better than the stock Kyosho chassis. Just had tons of grip everywhere in the corners; entry, mid and exit.
I am a believer now! If the full sponsored Kyosho guys were able to run this chassis it would be such an unfair advantage.
Bill thanks for reaching out and talking with me. You were right...period!
The amount of corner speed this chassis provides is FAR better than the stock Kyosho chassis. Just had tons of grip everywhere in the corners; entry, mid and exit.
I am a believer now! If the full sponsored Kyosho guys were able to run this chassis it would be such an unfair advantage.
Bill thanks for reaching out and talking with me. You were right...period!
04-12-2014, 05:32 PM
#1955
The BCE chassis makes the STRR evo much more consistent throughout the corners and in the bumps. The stock chassis was also very worn after just a short period 10-12 races, it needed to be replaced. Can't wait to see what happens with the guys at silverstate.
04-15-2014, 09:21 PM
#1956
Silverstate
Just getting all caught up from Silver State, figured I'd give a race report:
Our main focus this weekend was doing some testing on the RC8T +3mm chassis. We got alittle help too:
I showed up friday night, signed up saturday morning, and as Jimmy Babcock said "off the truck" I was already up to speed:
Running the fastest lap in my qualifier, and a couple stops to tune my motor and I was ready for bumping. Starting in the C main.
The Ryan's trucks were really fast. Saxton said its the best Maifields truck has ever looked. Cav had the best chance at the A main win, as Maifield Flamed out before coming in for his first pitstop. They were in the top 5 fastest trucks on the track for sure, Cav just missed podium by having to make an extra pit stop. His truck got better as the race went on, and the last half of the race he was on a tear. I was pitting for him and watched him get his truck into a really good groove. It was good to see those two on the track with the RC8T chassis Bill and I had developed. Also I recommend running at least 45g of weight under the front brace flat on the chassis to get some extra weight over the front wheels. Since the truck is already under and needs weight anyways, it also helps with turn in.
I also ran the RC8.2 MX2 +5mm prototype chassis here as well, with the big ruts and rough sections, I figured it would be a good place to test it. I must say it was pretty awesome. Tq'd my first qualifier right off the bat, and went on to bump from the C main all the way to finishing 3rd in the A main with only a round of qualifying as practice. All in all some great results for the weekend, and great data collected by some of the best drivers in the world.
Our main focus this weekend was doing some testing on the RC8T +3mm chassis. We got alittle help too:
I showed up friday night, signed up saturday morning, and as Jimmy Babcock said "off the truck" I was already up to speed:
Running the fastest lap in my qualifier, and a couple stops to tune my motor and I was ready for bumping. Starting in the C main.
The Ryan's trucks were really fast. Saxton said its the best Maifields truck has ever looked. Cav had the best chance at the A main win, as Maifield Flamed out before coming in for his first pitstop. They were in the top 5 fastest trucks on the track for sure, Cav just missed podium by having to make an extra pit stop. His truck got better as the race went on, and the last half of the race he was on a tear. I was pitting for him and watched him get his truck into a really good groove. It was good to see those two on the track with the RC8T chassis Bill and I had developed. Also I recommend running at least 45g of weight under the front brace flat on the chassis to get some extra weight over the front wheels. Since the truck is already under and needs weight anyways, it also helps with turn in.
I also ran the RC8.2 MX2 +5mm prototype chassis here as well, with the big ruts and rough sections, I figured it would be a good place to test it. I must say it was pretty awesome. Tq'd my first qualifier right off the bat, and went on to bump from the C main all the way to finishing 3rd in the A main with only a round of qualifying as practice. All in all some great results for the weekend, and great data collected by some of the best drivers in the world.
04-16-2014, 11:52 PM
#1959
Tech Regular
Any chance for a JQ WE or Ecar chassis in the future..
08-28-2014, 12:30 AM
#1960
Tech Addict
iTrader: (66)
i have a quick question i hope can be answered. I just switched to the bce chassis on my rc8t but now am having issues with my rear center driveshaft reaching the center diff. its barely inside the outdrive. Is this normal or should I be running a different gearbox input cup in the rear? Thanks in advance for any help.
08-28-2014, 06:20 AM
#1962
well as you know guy bill has pass away rip and best wish to his family bce is no more so wont be any more stuff coming I was told
08-30-2014, 09:23 AM
#1965
do you think that bec rc8t 3mm chassis are available ?