|
8T 2.0 Setup sheets....post here
Ride Height
Front = stock Rear =stock Droop Front = -5mm from stock Rear= stock Sway Bars Front = stock Rear = stock Springs/Shock oil/Pistons Front = Stock/Stock/stock Rear = Purple/ 40wt/stock Diffs Front Diff =7 Rear Diff =2 Center-diff=10 Gearing Gearing = 17/50 A-arms/Toe/Camber/Hubs Front = stock/stock/stock/middle Rear = stock/ 3-3 plate/stock/middle Tire and Wheels Aka = Ibeams soft Proline- Calibers soft Chassis & body chasis = stock body = stock Electronics/Battery and Battery Placement steering Servos = jr8711 Throttle/Brake servo = N/A Battery = Zippy Flightmax's Electronics = CC MMM Engine/Pipe/Plug/Fuel motor = NEU 1515 1Y Pipe = Plugs = Fuel = Track Conditions- Loose,dry, sandy and loamy |
Ride Height
Front = bones below level Rear = bones above level Droop Front = Rear= Sway Bars Front = 2.3 Rear = 2.3 Springs/Shock oil/Pistons Front = black/35/56 Rear = grey/ 30wt/56 Diffs Front Diff = 7 Rear Diff = 2 Center-diff=smart/grease Gearing/flywheel Clutch=m2c Clutchbell/spur gearing =[/b] 13/50 flywheel= i run both steel some times and alum A-arms/Toe/Camber Front = Rear = Tire and Wheels aka's-proline caliber Chassis & body chasis = stock body = stock Electronics/Battery and Battery Placement stering Servos = futuba bl351 Throttle/Brake servo = futuba bl451 Battery = losi lipo 2000 Electronics = spec Engine/Pipe/Plug/Fuel motor =ninja jx21-vspec as a back up Pipe = assotiated Plugs = os Fuel = byrons gen2 30% i need to go home and mesure stuff...i will edit later |
Ride Height
Front = 39 Rear =42 Droop Front =110(tryin 105 next time) Rear= 130 Sway Bars Front = 2.3 Rear = 2.3(going to 2.0) Springs/Shock oil/Pistons Front = Black/55/35 Rear = grey/56/32.5 Diffs Front Diff =7 Rear Diff =2 Center-diff=10 Gearing Gearing = 13/50 A-arms/Toe/Camber/Hubs Front = stock/stock/ -1 /foward Rear = stock/ stock/ -2 / foward Tire and Wheels Front- crimefighter m3 Rear- Bow-ties M3 (going to caliper m3) Chassis & body chasis = stock body = jconcept Electronics/Battery and Battery Placement steering Servos = hobbico Throttle/Brake servo = jr 4800 Battery =nimh 1600 Engine/Pipe/Plug/Fuel engine = Vspec Pipe = ae 2035 Plugs = p3 Fuel =sidewinder(going torco) Track Conditions- hard packed/high bite |
I'll just modify Reggie's because I am lazy.:D
Ride Height Front = 39mm Rear = 42mm Droop Front = 110mm Rear= 130mm Sway Bars Front = 2.3 Rear = 2.0 Springs/Shock oil/Pistons/positions Front = black/35wt/55/Middle on arm, middle on tower Rear = grey/ 30wt/56/Middle on arm, Outer on tower Diffs Front Diff = 7 Rear Diff = 3 Center-diff= 10 Gearing/flywheel Clutch= Fioroni Turbo Twin 2007 w/ 2 hard springs Clutchbell/spur gearing= 13/50 flywheel= fioroni Toe/Antisquat Front = 2* Out Rear = 3/3 Losi adjustable toe blocks. Running all 0's in the front block set. 1's up in the forward rear block, 0's in the back rear block. Camber Front = -1 Rear = -2 Tire and Wheels AKA, Proline, J-concepts, Panther, Losi, etc..(AKA Cityblocks #1) Chassis & body chasis = stock body = stock Wing = stock Electronics/Battery and Battery Placement stering Servo = Hitec 5955TG Throttle/Brake servo = futuba bl451 Battery = Stickman 2500mah 5 cell AA pack Electronics = Dx3r & DSM2 reciever, AMB PT Engine/Pipe/Plug/Fuel motor = v-spec Pipe = Losi RE11 Plugs = OS P3 Fuel = Odonnell 20% race Camber Links, Hubs front = Middle on tower, Aluminum carriers with one shim below the link. rear = Lower on tower, innner on hub hubs = Middle 107mm front camber links in the rear to achieve my settings. Ackerman Short Track Conditions. Hard pack, medium bite. |
i need to try the 2.0 sway bar in the rear... i see a coupe ppl run it
|
Originally Posted by reggie l.
(Post 6063698)
i need to try the 2.0 sway bar in the rear... i see a coupe ppl run it
|
Originally Posted by JAMMINKRAZY
(Post 6063769)
the 2.0 bar and shorter rear links are tips posted by Casey Peck in the 8T 2.0 thread. I made both changes for this past weekend, and noticed a big increase in turn in. It reduced on power steering a tad, but I can deal with that.:nod:
|
Ride Height
Front = 39mm Rear = 42mm Droop Front = 110mm Rear= 130mm Sway Bars Front = 2.3mm Rear = 2.3mm Springs/Shock oil/Pistons/Location Front = black / 35wt / 55 / Middle on tower & Middle on arm Rear = white / 32.5wt / 56 / Out on tower & Middle on arm Diffs Front Diff = 7k Rear Diff = 3k Center-diff= 10k Gearing/flywheel Clutch= on my RB C6 i use a Losi Steel flywheel, 2 carbon with green springs 2 MaxLife with gold springs. on my RB WS7 i use a Losi aluminium flywheel, 2 carbon with gold springs 2 MaxLife with silver springs Clutchbell/spur gearing= 13/50 Toe/Antisquat Front = 2* Out Rear = 3.25/3 Losi adjustable toe blocks. Running all 0's in the front block set. 1's up in the forward rear block, .5's out in the back rear block. Camber Front = -2 Rear = -3 Tire and Wheels AKA's, Losi/GRP's and Prolines with GRP foams Chassis, body and wing chasis = stock body = stock wing = Team Associated RC8 Electronics/Battery and Battery Placement stering Servo = Hitec 7955TG Throttle/Brake servo = Hitec 7955TG Battery = 1600mah hump pack Electronics = Nomadio React Engine/Pipe/Plug/Fuel motor = RB C6BBT L2G / RB WS7III L2G Pipe = RB 2045 Plugs = Odonnell 99T Fuel = NitroX HB7333 Camber Links, Hubs front = 2 / A rear = 3 / B hubs = all the way forward Track Conditions. Hard pack, large jumps, various bite |
Ride Height
Front = 38mm Rear = 42mm Droop Front = -110mm Rear= 130mm Sway Bars Front = 2.3mm Rear = 2.3mm Springs/Shock oil/Pistons Front = Black/40wt/55 Rear = Grey/ 32.5wt/56 FULL REBOUND Diffs Front Diff =10 Rear Diff =5 Center-diff=10 Gearing Gearing = 13/50 A-arms/Toe/Camber/Hubs Front = stock/stock/stock/middle Rear = stock/ 3-3 plate/stock/middle Tire and Wheels Aka = Ibeams med Proline- Calibers med - FREAKIN GREAT the best tire out Proline - BowTies hard Chassis & body chasis = stock body = stock / upgrade RC Electronics/Battery and Battery Placement steering Servos = JR 9100T Throttle/Brake servo = JR 9100S Battery = Losi Lipo Electronics = AMB Engine/Pipe/Plug/Fuel motor = OS Vspec - Ninja JX - Nova +4 - OS 28 Pipe = 2060 - 2060 - Nova - JP3 Plugs = OS P3 Fuel = Byrons Gen 3 30% Track Conditions- Loose,dry, loamy, no water |
Ride Height
Front = 37mm Rear = 39mm Droop Front = 108mm Rear= 128mm Sway Bars Front = 2.3mm Rear = 2.3mm outdoor / 2.5mm indoor Springs/Shock oil/Pistons/Location Front = black / 35wt / 55 / Middle on tower & Middle on arm Rear = Mugen 10.5 / 32.5wt / 56 / Out on tower & Middle on arm Diffs Front Diff = 7k Rear Diff = 4k Center-diff= 20k Gearing/flywheel Clutch= Mugen 3 shoe w/1.0 springs Clutchbell/spur gearing= 13/50 Toe/Antisquat Front = 2* Out Rear = 2.5* outdoors, 2.0* indoors / 3* Rear toe blocks are stock in front and Losi adjustable in the rear. Camber Front = -2 Rear = -2 Tire and Wheels CityBlock, City/Beam, Raptors Chassis, body and wing chasis = stock body = stock wing = stock Electronics/Battery and Battery Placement stering Servo = Hitec 7955TG Throttle/Brake servo = Futaba BLS451 Battery = 2000mah lipo Electronics = KO Propo EX-1 / Specktrum Engine/Pipe/Plug/Fuel motor = Ninja JX21 Pipe = JP3 Plugs = P3 Fuel = NitroJuice Camber Links, Hubs front = 2 / A rear = 3 / B hubs = all the way forward Track Conditions. Outdoor: Big, open, hard pack, Dusty. Indoor: Hard pack, medium to good traction, tight Edit: Forgot, short Ackerman |
Originally Posted by JAMMINKRAZY
(Post 6063769)
the 2.0 bar and shorter rear links are tips posted by Casey Peck in the 8T 2.0 thread. I made both changes for this past weekend, and noticed a big increase in turn in. It reduced on power steering a tad, but I can deal with that.:nod:
|
EDITED
Ride Height Front = bones below level Rear = slightly above level Droop Front = 109(just to make sure it doesnt extend to much over 110) Rear=129(same as the front) Sway Bars Front = 2.3 Rear = 2.3 Springs/Shock oil/Pistons Front = black/35/56 Rear = grey/ 30wt/56 Diffs Front Diff = 7k Rear Diff = 2k Center-diff=10k Gearing/flywheel Clutch=m2c...answer r/c Clutchbell/spur gearing =[/b] 13/50 flywheel= i run both steel some times and alum A-arms/Toe/Camber Front =2 out Rear = Tire and Wheels aka's-losi xtt's Chassis & body chasis = stock body = stock Electronics/Battery and Battery Placement stering Servos = futuba bl351 Throttle/Brake servo = futuba bl451 Battery = losi lipo 2000 Electronics = spec Engine/Pipe/Plug/Fuel motor =ninja jx21-vspec as a back up Pipe = re11 Plugs = os Fuel = byrons gen2 30% |
Originally Posted by reggie l.
(Post 6163258)
kan you post pics? of this
|
Originally Posted by JAMMINKRAZY
(Post 6163359)
Not really much to see in a picture. Just shorter camber links running in the inner most hole.:nod:
|
Originally Posted by reggie l.
(Post 6164023)
lets say im a visual learner:D
|
| All times are GMT -7. It is currently 07:35 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.