AKA tires
#1801
#1802
#1805
Tech Adept
hi everyone, im looking for a good tire that i can run on a dusty/med packed track with fast cornors that have ruts
people keep saying impacts but im having issues with the ruts flipping the car over
people keep saying impacts but im having issues with the ruts flipping the car over
#1807
Tech Adept
Yes grid irons work but as the track gets a groove in certain parts around 25mins in then they are gone pretty bald, 20min finals they are awesome and can probably use them for some practice but are shot otherwise, back 8 years ago or so i used to use I beams in med(around 20c) and that would last but these days thats not suitable and made the car too hard to drive
#1808
The new P1s should be a good tire for those conditions. If you aren't locked into running AKA tires, you might try Proline Buckshots until the P1s are available.
#1810
#1811
Tech Master
can someone point me to find out HOW to classify dirt ??? links and such..
I am new to dirt last season.. in stock 17.5... I am running AKA Enduro 3.....
as that is what some others are running at this track
south Texas,, outdoor... tight turns and long jumps... average lap is 50-55 seconds.. 5 minutes...
mod is doing 42's... and I have been pushed into mod..
I have been RC carpet racing since 1991... 1/12, 1/10 on-road, oval, banked oval..
also blacktop, concrete. soda pop coated concrete..even rubber on banked blacktop ( 1/4 scale )
currently Sc5m, Tekin 10.5.. I have never ran mod before..
I have downloaded several brand tire charts... no real understanding with them.
I know this is the Nitro side.. but the AKA thread is here.
Thank You for your help.
I am new to dirt last season.. in stock 17.5... I am running AKA Enduro 3.....
as that is what some others are running at this track
south Texas,, outdoor... tight turns and long jumps... average lap is 50-55 seconds.. 5 minutes...
mod is doing 42's... and I have been pushed into mod..
I have been RC carpet racing since 1991... 1/12, 1/10 on-road, oval, banked oval..
also blacktop, concrete. soda pop coated concrete..even rubber on banked blacktop ( 1/4 scale )
currently Sc5m, Tekin 10.5.. I have never ran mod before..
I have downloaded several brand tire charts... no real understanding with them.
I know this is the Nitro side.. but the AKA thread is here.
Thank You for your help.
Last edited by chuck_thehammer; 02-11-2019 at 06:46 AM.
#1812
Buggy, Truggy, 1/10, 1/8? Just because Impacts are great on a 1/8 buggy doesn't mean they'll be great on 1/10 buggy...
#1813
Tech Master
iTrader: (4)
Yes grid irons work but as the track gets a groove in certain parts around 25mins in then they are gone pretty bald, 20min finals they are awesome and can probably use them for some practice but are shot otherwise, back 8 years ago or so i used to use I beams in med(around 20c) and that would last but these days thats not suitable and made the car too hard to drive
#1814
Tech Master
can someone point me to find out HOW to classify dirt ??? links and such..
I am new to dirt last season.. in stock 17.5... I am running AKA Enduro 3.....
as that is what some others are running at this track
south Texas,, outdoor... tight turns and long jumps... average lap is 50-55 seconds.. 5 minutes...
mod is doing 42's... and I have been pushed into mod..
I have been RC carpet racing since 1991... 1/12, 1/10 on-road, oval, banked oval..
also blacktop, concrete. soda pop coated concrete..even rubber on banked blacktop ( 1/4 scale )
currently Sc5m, Tekin 10.5.. I have never ran mod before..
I have downloaded several brand tire charts... no real understanding with them.
I know this is the Nitro side.. but the AKA thread is here.
Thank You for your help.
I am new to dirt last season.. in stock 17.5... I am running AKA Enduro 3.....
as that is what some others are running at this track
south Texas,, outdoor... tight turns and long jumps... average lap is 50-55 seconds.. 5 minutes...
mod is doing 42's... and I have been pushed into mod..
I have been RC carpet racing since 1991... 1/12, 1/10 on-road, oval, banked oval..
also blacktop, concrete. soda pop coated concrete..even rubber on banked blacktop ( 1/4 scale )
currently Sc5m, Tekin 10.5.. I have never ran mod before..
I have downloaded several brand tire charts... no real understanding with them.
I know this is the Nitro side.. but the AKA thread is here.
Thank You for your help.
no dirt education.... the oldest form of motor racing and no information.
I keep getting spend $$$$ on many sets of tires.. and find out for yourself...
Fear NOT.. I will not win your "A" main.. just trying to have more fun..
#1815
Just post some pics of your track surfaces.
My traveling 1/8th box has:
Pink Megabytes
Soft Reflex's
Hard, Yes HARD, Gridirons.
Soft Ibeams
Soft p1's
Clay or SS Typo's
That should cover all surfaces. And it's not wasteful, because you always need tires.
My traveling 1/8th box has:
Pink Megabytes
Soft Reflex's
Hard, Yes HARD, Gridirons.
Soft Ibeams
Soft p1's
Clay or SS Typo's
That should cover all surfaces. And it's not wasteful, because you always need tires.