nitro revo to brushless conversion
11-12-2012 | 10:52 AM
#17
Tech Regular
iTrader: (57)
Joined: Apr 2009
Posts: 393
conversion
i did buy a integy motor mount but other then that i made everything else the battery tray is from a losi ten scte i made the receiver mount and for the breaks i used a y-adapter and programed my esc for no reverse and set it to 50% brakes here are the pictures
Attachment 967149
Attachment 967150
Attachment 967151
Attachment 967152 what you see in the last 2 pictures is for sale make me an offer
Attachment 967156 the center axles are integy and have 5 runs on them im even selling the body and wheels make offer
Attachment 967149
Attachment 967150
Attachment 967151
Attachment 967152 what you see in the last 2 pictures is for sale make me an offer
Attachment 967156 the center axles are integy and have 5 runs on them im even selling the body and wheels make offer
I just saw this thread and looks like a fun project. I'll see if I can find any more conversion people have done. If anyone done it please send me some pictures. Thanks.
11-15-2012 | 06:22 PM
#18
Tech Adept
Joined: Jan 2009
Posts: 189
From: N37 33* W122 3*
did this a few months ago.
used the tekno kit from tower for $100 or so.
used 1/8 scale speed passions esc and motor for $170.
had to take apart the tranny to install the single speed conversion.
now if i tighten up the spur gear, i can do wheelies or flip it on demand...
and this is a 2.5 revo i bought almost a decade ago.
used the tekno kit from tower for $100 or so.
used 1/8 scale speed passions esc and motor for $170.
had to take apart the tranny to install the single speed conversion.
now if i tighten up the spur gear, i can do wheelies or flip it on demand...
and this is a 2.5 revo i bought almost a decade ago.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
