How To Convert Tmaxx??????
#1
How To Convert Tmaxx??????
Hey guys I have a tmaxx 2.5 with the 3.3 engine on it, I dont know how to tell the difference between the 2 besides the engine....lol.....anyways I heard there is an older model and newer model but I dont know which mine is, It has black trans and plastic, also has the 2 speed with reverse, What I want to know is what all do I need to swap to make it a true 3.3? and what do I need to do to get rid of reverse?
#2
Super Moderator
iTrader: (63)
Join Date: May 2005
Location: a very small town in wisconsin that is in the middle of absolutely no where
Posts: 5,155
Trader Rating: 63 (100%+)
please post in the monster truck forum as you will get better responses in there. i will move this thread. thank you
#4
There are 5 different model numbers of the Tmaxx. Models 4910 (which has 3 versions – the early narrow maxx with a pro.15 engine, the wide maxx with the 2.5 engine and the newer Tmaxx classic which also has the 2.5 engine).
Then there is the Model 4902 – 2.5R engine & 1st grey transmission, model 4909 - 1st 3.3 model, model 4908 extended chassis & no reverse, model 4907-extended chassis, no reverse with the 2.4ghz radio system.
A black transmission indicates it is one of the 4910 models.
It’s usually cheaper to buy a 3.3 roller and install your engine to bring it up to current 3.3 specs than buying all the parts needed to fully convert a 4910.
Eliminating reverse in the black transmission is as simple as installing the FOC (forward only conversion) for around $10.00.
Then there is the Model 4902 – 2.5R engine & 1st grey transmission, model 4909 - 1st 3.3 model, model 4908 extended chassis & no reverse, model 4907-extended chassis, no reverse with the 2.4ghz radio system.
A black transmission indicates it is one of the 4910 models.
It’s usually cheaper to buy a 3.3 roller and install your engine to bring it up to current 3.3 specs than buying all the parts needed to fully convert a 4910.
Eliminating reverse in the black transmission is as simple as installing the FOC (forward only conversion) for around $10.00.
#6
To convert the black transmission to forward only thats all you need.
Part # 4994X
Part # 4994X
#9
I have a foc, I would of gave you for free, you would of had to just pay shipping.
To newer 3.3
Chassis
Trans
Whole center
Gray bulks if you don't have them
3.3 diffs(4 bolt hold case not 2)
Shocktowers need to have square mounts. Not round
Axles and knuckles
The only real thing you can use off of your truck now is the arms,servos,battery, and a few other things
To newer 3.3
Chassis
Trans
Whole center
Gray bulks if you don't have them
3.3 diffs(4 bolt hold case not 2)
Shocktowers need to have square mounts. Not round
Axles and knuckles
The only real thing you can use off of your truck now is the arms,servos,battery, and a few other things
#10
I have a foc, I would of gave you for free, you would of had to just pay shipping.
To newer 3.3
Chassis
Trans
Whole center
Gray bulks if you don't have them
3.3 diffs(4 bolt hold case not 2)
Shocktowers need to have square mounts. Not round
Axles and knuckles
The only real thing you can use off of your truck now is the arms,servos,battery, and a few other things
To newer 3.3
Chassis
Trans
Whole center
Gray bulks if you don't have them
3.3 diffs(4 bolt hold case not 2)
Shocktowers need to have square mounts. Not round
Axles and knuckles
The only real thing you can use off of your truck now is the arms,servos,battery, and a few other things
well that sucks......lol.......I have square mounts, gray bulkheads, and not sure on the diffs.
#11
Tech Lord
iTrader: (252)
I personnaly wouldnt worry until things break. We are still running 2.5 diffs with a 3.3 and the small driveshafts . Finally broke a driveshaft the other night . I think the terrain tires and slipper have a lot to do with how long they last. What I have found is that a head on with a savage does more damage to the kids tmaxx than the 3.3 will ever do . LOL .