New traxxas e-maxx
#226
Does anyone here knows what's the weight(grams) of the new emaxx stock tires w/rims? The old emaxx is stock tires w/rims was around 350g.
Also, What the average lifespan of the stock emaxx 14.4V motors and esc before it goes kapput?!
Also, What the average lifespan of the stock emaxx 14.4V motors and esc before it goes kapput?!
Last edited by Vrooomvroom; 03-14-2008 at 09:44 PM.
#227
on behalf of my good friend, kennethM , presenting the one, the only, EMAXX 2 low CG conversion
specs:
- fully custom built all aluminum T6 chassis
- novak BL 6.5 HV maxx
- panther low profile tires on losi LPR rims
- 2 pcs. 6000mah 7.4v lipos
- stock drivetrain and suspension
this will see action on april 13's race in quezon city offroad track (philippines)
specs:
- fully custom built all aluminum T6 chassis
- novak BL 6.5 HV maxx
- panther low profile tires on losi LPR rims
- 2 pcs. 6000mah 7.4v lipos
- stock drivetrain and suspension
this will see action on april 13's race in quezon city offroad track (philippines)
#229
Tech Adept
I am thinking of getting the CVD set for my E-Maxx but given the length it seems that they would twist out due to the torque of the motors. Are these worth it? Here is the set I am interested in:
http://cgi.ebay.com/Traxxas-E-Maxx-C...QQcmdZViewItem
Also, I was thinking, over time, that I would like to upgrade it to all aluminum. Is this worth it or would things break easier?
http://cgi.ebay.com/Traxxas-E-Maxx-C...QQcmdZViewItem
Also, I was thinking, over time, that I would like to upgrade it to all aluminum. Is this worth it or would things break easier?
#230
looks like a tough ride JONSKI, very nice indeed
#232
Tech Rookie
What to do!?
Some really nice units in these here post's I just watched my nephews leave my driveway, both with a not as new as the day I purchased them Savage 4.6 . We run them as tomorrow would never come, until they got the hang of it. (they wont be stuck behind a tv/game anymore) and it only took me a week, 3 gallons of fuel, 5 glow plugs, a new bird feeder, some front end realigning and a new throttle servo for one of them. Cough sputter wheeze.. Darn Nitro was fun when I was a younger kid but now P. U. BUT! I have a prob now. I'm bit by the bug to play with the shinny new RC toy,s again. I like the new E-Maxx as me nephews researched all the buggies till they picked there HPI's. Nice setup but what I have seen, I like the E-Maxx. Problem I also like the buzz of going fast with them. Errg I like the waterproof of the orig. Doh! Now I want the best runtime I can also get. I wana BULLET PROOF! version that will stay together for more than a few months. I don't often get a chance to bash and crash, nor do I wish to intentionality tear one up, on the other hand I don't want to be timid with it either. Ok maybe a good one for wet play and a good one for Race and dash for the Glory, because I will need something to catch my nephews when they visit. I do not repeat don't wanna do Nitro. I tried to talk the nephew's into Battery with no luck. They saved there money and I matched it to purchase their choice. Help Now I see what them meant by I'm to long winded.
#233
Tech Regular
iTrader: (20)
6.5 hvmaxx
has anyone here running 6.5 hvmaxx on there emaxx 3905? planning to put brushless on mine. i have already sold my evx2 coz i dont want to have nightmares if i messed up the waterproof esc so i decided to go brushless but i prefer the 6.5 hvmaxx since 4.5 hvmaxx is to much for the emaxx truck at the novak site its stated there to run on 12t pinion/68t spur...am i going on the right direction on this or i could use 13t pinion/68t spur for more top end w/o compromising the torque....
p.s.: i only intend to run novak hvmaxx brushless system coz i like the way
sensored system run even at low speed...many tnx for the help....
p.s.: i only intend to run novak hvmaxx brushless system coz i like the way
sensored system run even at low speed...many tnx for the help....
Last edited by rs550; 04-17-2008 at 12:18 AM.
#234
That is odd. No one answered rs550 Qs. If I am not mistakes, some posted their "review" of how the HV-maxx run on this 3905 E-Maxx.
I used HV-Maxx 6.5 before in my old E (3906 version). runs great, long runtime and a bit faster than stock titans. No thermaliing what so ever.
For this veriosn 3905, I am planning to get the new MMM version. But I wll wait for the combo pack, not just the ESC. However, IF Novak is going to release a newer version of the HV-Maxx with the MOD 1 installed, I'll go for Novak. Just because from my experience (ESCs and bushless), I never had a single problem.
I used HV-Maxx 6.5 before in my old E (3906 version). runs great, long runtime and a bit faster than stock titans. No thermaliing what so ever.
For this veriosn 3905, I am planning to get the new MMM version. But I wll wait for the combo pack, not just the ESC. However, IF Novak is going to release a newer version of the HV-Maxx with the MOD 1 installed, I'll go for Novak. Just because from my experience (ESCs and bushless), I never had a single problem.
#235
ACTION PICS:
#236
Tech Regular
iTrader: (20)
6.5hv maxx
That is odd. No one answered rs550 Qs. If I am not mistakes, some posted their "review" of how the HV-maxx run on this 3905 E-Maxx.
I used HV-Maxx 6.5 before in my old E (3906 version). runs great, long runtime and a bit faster than stock titans. No thermaliing what so ever.
For this veriosn 3905, I am planning to get the new MMM version. But I wll wait for the combo pack, not just the ESC. However, IF Novak is going to release a newer version of the HV-Maxx with the MOD 1 installed, I'll go for Novak. Just because from my experience (ESCs and bushless), I never had a single problem.
I used HV-Maxx 6.5 before in my old E (3906 version). runs great, long runtime and a bit faster than stock titans. No thermaliing what so ever.
For this veriosn 3905, I am planning to get the new MMM version. But I wll wait for the combo pack, not just the ESC. However, IF Novak is going to release a newer version of the HV-Maxx with the MOD 1 installed, I'll go for Novak. Just because from my experience (ESCs and bushless), I never had a single problem.
#237
Yup. Filipino here. I started this hobby there in our country and I brought it with me here in Canada.
If you are not in a hurry to upgrade, try to wait for a little while. Tekin and Castle Creations are bringing out their own MT or 1/8th edition of brushless. If I am not mistaken, the new version of Novak for their 1/8th brushless conversion kit will be updated as well. Most especially with this installed:
http://www3.towerhobbies.com/cgi-bin...?&I=LXUAX9&P=Z
Anyways, Keep us posted!
If you are not in a hurry to upgrade, try to wait for a little while. Tekin and Castle Creations are bringing out their own MT or 1/8th edition of brushless. If I am not mistaken, the new version of Novak for their 1/8th brushless conversion kit will be updated as well. Most especially with this installed:
http://www3.towerhobbies.com/cgi-bin...?&I=LXUAX9&P=Z
Anyways, Keep us posted!
#238
Tech Regular
iTrader: (20)
hv maxx 6.5
nice to know that there are filipinos in every part of the world that are still active on rc world nowadays
good to here that KABAYAN! and tnx for the info regarding the other brushless system but ive already placed order at tower hobbies once the 6.5hvmaxx becomes available they will send it right away here in our country.. for the meantime i think thats enough for me since im at peace using novak esc, before i hav an esavage which i purchase early last year and when i messed up the stock esc ive change it to novak super duty xr until i sell the esavage kit and the esc...and now ive decided to go on emaxx16.8v and use a novak hvmaxx system...ill keep you posted tnx anyway im always on line everyday...ciao
good to here that KABAYAN! and tnx for the info regarding the other brushless system but ive already placed order at tower hobbies once the 6.5hvmaxx becomes available they will send it right away here in our country.. for the meantime i think thats enough for me since im at peace using novak esc, before i hav an esavage which i purchase early last year and when i messed up the stock esc ive change it to novak super duty xr until i sell the esavage kit and the esc...and now ive decided to go on emaxx16.8v and use a novak hvmaxx system...ill keep you posted tnx anyway im always on line everyday...ciao
Last edited by rs550; 04-22-2008 at 11:52 PM.
#239
No problemo rs550. You will be surpised on how many kababayans are also in our hobby here in Canada. I met 2 of them already.
To be honest. If only Novak have that upgraded pinion in the market right now with the HV-Maxx, I'll be buying another one for this new 3906 version. Just remember the recommended gearing:
http://www.teamnovak.com/tech_info/i...tes/index.html
To be honest. If only Novak have that upgraded pinion in the market right now with the HV-Maxx, I'll be buying another one for this new 3906 version. Just remember the recommended gearing:
http://www.teamnovak.com/tech_info/i...tes/index.html
#240
Tech Regular
iTrader: (20)
No problemo rs550. You will be surpised on how many kababayans are also in our hobby here in Canada. I met 2 of them already.
To be honest. If only Novak have that upgraded pinion in the market right now with the HV-Maxx, I'll be buying another one for this new 3906 version. Just remember the recommended gearing:
http://www.teamnovak.com/tech_info/i...tes/index.html
To be honest. If only Novak have that upgraded pinion in the market right now with the HV-Maxx, I'll be buying another one for this new 3906 version. Just remember the recommended gearing:
http://www.teamnovak.com/tech_info/i...tes/index.html