Robitronics Scalpel 1/18th Pan Car?
#1186
#1189
Tech Rookie
Are the front shock absorbers on this oil filled?
#1190
The front shocks are friction shocks like any other pan car.
#1191
Thanks
#1192
Tech Elite
iTrader: (59)
ROLLERS
Question for everybody. Brown Engineering is thinking about offering rolling chassis' kits, they would include the conversion kit of your choice and a robitronic scalpel kit. The only problem is finding a price that is good for our customers. What would you pay for one?
thanks,
thanks,
#1193
Tech Elite
iTrader: (64)
Join Date: Jun 2008
Location: Conducting aggressive board meetings at my local track
Posts: 3,301
Trader Rating: 64 (100%+)
Couple of questions.
What's goin on with Robitronics and Tower Hobbies? Looks like Tower is dropping the brand.
With the EKO18 from Exotek, are the body posts still in the original locations? I have an unpainted, mounted body I'm hopin to use with the conversion.
What's goin on with Robitronics and Tower Hobbies? Looks like Tower is dropping the brand.
With the EKO18 from Exotek, are the body posts still in the original locations? I have an unpainted, mounted body I'm hopin to use with the conversion.
#1196
Tech Rookie
Hi,
First post here. I'm looking to get a 1/18 scale car and would like to get the 6 cell Brown Eng upgrade kit, can I just buy the SCOOBY HORTON Conversion Kit and then the Scalpel parts I need, dose not look like I would need much as the Scooby Horton kit looks like it all most a complete car? Also..who has 1/18 scale bodies, I don't see many out there? One last question, I have a new Neu 1105/2Y-5250 motor, would that work in this car?
Thanks,
LeeU
First post here. I'm looking to get a 1/18 scale car and would like to get the 6 cell Brown Eng upgrade kit, can I just buy the SCOOBY HORTON Conversion Kit and then the Scalpel parts I need, dose not look like I would need much as the Scooby Horton kit looks like it all most a complete car? Also..who has 1/18 scale bodies, I don't see many out there? One last question, I have a new Neu 1105/2Y-5250 motor, would that work in this car?
Thanks,
LeeU
#1197
Tech Regular
Hi LeeU I have a SCOOBY HORTON conversion but what I did was find a complete scalpel and just stripped it of everything I needed that way I knew that I wouldn't have to worry about missing anything and as far as motors go I think any 1/18th scale stuff would fit, right now I just have 4 cell with the robitronics 300 motor in mine getting ready for the ECC. If you have anymore ?'s just ask
#1198
Tech Rookie
Thanks, there are 4 on Ebay for $99.00 so I'll get one of those and I will get the Castle Creations Sidewinder and 8000 VA brushless setup for power, I have JR XR3I radio and receiver and a JR Digital DS290G servo.
Thanks,
Lee
Thanks,
Lee
#1199
For people who have been looking for kits or replacement parts, skmotion.net has them in stock.
#1200
scapel
When or Is the conversion and kit avaliable together. Thanks