|
Originally Posted by mjordan44847
(Post 15706570)
This looks awesome I may have to pick up a box stock car and get the track.
is there a car you’d suggest to start? Awd fwd rwd? thanks all As Lucky said RWD car are favored and have not had any AWD cars run except in the Open AWD class. Come on join us. Cheers, Jim |
Report ottobre 2020 categoria 3500 stock!
Risultati 20/2020 Aula stock Date 10-2020 Location Italia Race Time 276.9 Fastest Lap 3.33 Elettroniche evo Body Mc Wheelbase 98 Tris 30 Motor 3500kw Batterie 750 anteriore Springs Red T-Plate 3 nera motore Il supporto della antivibrazioni (se applicabile) Dampener fluido (se applicabile) Gearing- std Notes- |
Box Stock Entry Oct-2020
Class- Box Stock
Date- 29-Oct-2020 Location- Redondo Beach, CA USA Race Time- 298.195 (04:58.195) Fastest Lap- 03.731 Chassis- MR03 Body- Porsche 911 GT3 RS Wheelbase- 90 mm Tires- Front PN KS Firm, Rear PN KS Medium Motor- Stock Batteries- Enloop Pro 900 mah Front Springs- PN Yellow T-Plate- PN #4 Carbon Motor Mount- RM Dampener (If applicable)- Stock Dampener Fluid (If applicable)- N/A Gearing- 7T Pinion Notes - King Pin Flip Pictures added to Facebook. |
Stock Class 2020-Oct
Class- Stock
Date- 29-Oct-2020 Location- Redondo Beach, CA USA Race Time- 283.787 (04:43.787) Fastest Lap- 03.558 Chassis- MR03 Body- Audi R8 LMS Wheelbase- 98 mm Tires- Front PN KS Super Soft, Rear PN KS Super Soft Motor- PN 70T Batteries- Enloop Pro 900 mah Front Springs- PN White T-Plate- PN #4 Carbon Motor Mount- MM (PN Alu) Dampener (If applicable)- PN Dual Spring Dampener Fluid (If applicable)- N/A Gearing- 7T Pinion Notes - King Pin Flip Pictures added to Facebook |
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Hello All, Sorry for the delay, was busy with month end stuff. I will get the results up later on today but wanted to get Novembers circuit posted up. https://cimg0.ibsrv.net/gimg/www.rct...189e4afbe8.jpg Cheers, Jim |
Originally Posted by zxcvb1t
(Post 15698956)
After six months of delay, my Kyosho track is finally here. This will be my first attempt in this series, and here are the details.
Class- Stock Date- 07-Oct-2020 Location- Hangzhou, China Race Time-4:46.799(286.799) Fastest Lap- 00:03.584 Chassis- MR03 EVO Body- Toyota Supra JGTC 2003' Wheelbase- 94 mm Tires- Rear Kyosho 20 deg wide slick , Front Kyosho 30 deg Slick Motor- Surpass 3500KV Batteries-Gen ace 800mah. Front Springs- Kyosho Orange T-Plate- Kyosho FRP plate, 5M Motor Mount- Kyosho MM2(MZ217) Dampener (If applicable)- Stock Dampener Fluid (If applicable)- 350cst Damper Oil Gearing- 7T Pinion Notes - King Pin Flip, 432PT RADIO USED, 115% epa for steering and 0% expo on steering. 12 for steering punch , drag brake set to 2 on ICS manager and others are default settings. Narrow front end, 94mm wheelbase ,brushless. Changing to JGTC supra and wider rear tires do make this thing a lot more stable. Also, thanks Jim for answering my questions in regards of posting... Also, with zround and timing system installed, I was able to get rid of some ghost lap... |
Originally Posted by Lucky Lou
(Post 15713624)
What wheel offsets are you running on the Supra?
Normally I run 0 front and rear , on wide offset. The body capable to run 0.5 front but i dont have 0.5 wheel. David |
Originally Posted by zxcvb1t
(Post 15713684)
Hi Lou
Normally I run 0 front and rear , on wide offset. The body capable to run 0.5 front but i dont have 0.5 wheel. David I picked up a couple of Supras but can't get them dialed in. Running wide with 0 offset all around. Getting lots of traction roll. |
Originally Posted by Lucky Lou
(Post 15713706)
Thanks David,
I picked up a couple of Supras but can't get them dialed in. Running wide with 0 offset all around. Getting lots of traction roll. I may not be much a help here but I can sum up something about my chassis. Mostly about Tires. I have no experience with PN's tire. But judging from the description of most people here, these PN tires have more grip than Kyosho's tire. Maybe this cause the traction roll for you. Also, the tires on most of my chassis are worn down, smaller than when they were brand new. I don't have a caliper now but I will measure them when I bring one back home. Also, I taped down my rear tires with R246's double tape. Without it, the car is very twichy and sometimes will filp over. For the front tires, I tape the inner side of the wheel, I think this will also help the traction roll a bit. David |
cheers mates, I just built track of November and fired up RC Timing on my phone. I'm racing in Open 4wd class.
|
Originally Posted by wamikka
(Post 15715023)
cheers mates, I just built track of November and fired up RC Timing on my phone. I'm racing in Open 4wd class.
|
Originally Posted by Lucky Lou
(Post 15716929)
Welcome. What platform you running?
|
Originally Posted by zxcvb1t
(Post 15713863)
Hi
I may not be much a help here but I can sum up something about my chassis. Mostly about Tires. I have no experience with PN's tire. But judging from the description of most people here, these PN tires have more grip than Kyosho's tire. Maybe this cause the traction roll for you. Also, the tires on most of my chassis are worn down, smaller than when they were brand new. I don't have a caliper now but I will measure them when I bring one back home. Also, I taped down my rear tires with R246's double tape. Without it, the car is very twichy and sometimes will filp over. For the front tires, I tape the inner side of the wheel, I think this will also help the traction roll a bit. David What camber are you running on the knuckles? |
Originally Posted by Lucky Lou
(Post 15717150)
David,
What camber are you running on the knuckles? Currently I am using R246's 1deg camber knuckles. |
Box Stock
Reserved
|
| All times are GMT -7. It is currently 07:25 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.