![]() |
Originally Posted by duckman996
(Post 15440430)
*Updated May 4 2019 Class- Stock Date- May 4 2019 Location- Home Race Time- 401.6 Fastest Lap- 4.46 Chassis- MR03 Body- Kyosho Audi R8 Wheelbase- 98 Tires- Kyosho 30fr / 20r Motor- PN 70 Batteries- Duracell 800 NiMh Front Springs- Unknown. Feel equal to PN yellow T-Plate- Pn 5 Motor Mount- PN Dampener (If applicable)- Dampener Fluid (If applicable)- Gearing- 7/44 Notes- Ran full throttle trim in this run. Was much harder to be cleaner through the whole run but fast laps were much faster. https://cimg4.ibsrv.net/gimg/www.rct...ad68467683.png New run May 4th 2019 https://cimg5.ibsrv.net/gimg/www.rct...386a98fd1.jpeg https://cimg6.ibsrv.net/gimg/www.rct...668f44364.jpeg https://cimg7.ibsrv.net/gimg/www.rct...8fffe548c.jpeg |
Originally Posted by Mattdaddy1974
(Post 15443709)
Class-Open 2wd Date-5/5/19 Location-Rotonda, Fl Race Time-440.8 Fastest Lap-4.50 Chassis-GLR Body- Mini Z McLaren Wheelbase-98 Tires-Pn radial Motor-GL 3500kv Batteries-GL 330mah Front Springs-Stock T-Plate-N/A Motor Mount-Stock Dampener (If applicable)-Stock Dampener Fluid (If applicable)-Losi Diff Grease Gearing-10t pinion 53t Spur Notes-this was the first run with new build. https://cimg5.ibsrv.net/gimg/www.rct...2dcb79f56c.png https://cimg0.ibsrv.net/gimg/www.rct...96cec447e.jpeg |
Originally Posted by Mattdaddy1974
(Post 15444505)
Thats some fast laps. With a 70T this car just works. I have 2 local tracks - one is a little smaller and this car is awesome on it. Almost perfect on the 2-wide L sized tracks. The second track is quite a bit bigger so this car is really just relegated to the mini96 and the smaller local track |
Good to see a GLR on the track. I may need to get one of these as well as I just love the GLA.
Sound like you are having an issue with traction rolling. I have had no issues with my 90mm wide car traction rolling but the same chassis at 86mm running the Stratos body will TR if I ham ham fisted. I will also TR my 94mm chassis once the tires get a bit of heat in them.....again I can pretty much eliminate it if I am gentle at the end of the long straights......I have actually come around the turn at the end of the straight in two wheels a number of times and kept it shiny side up. I did not get to run this weekend but I will get some laps in nest weekend. I converted on 94mm car to LM spec so I will need some time to get it sorted. I was kind of bummed switching it over as my 94mm chassis felt so good. Cheers, Jim |
It’s a work in progress. This car is surprisingly easy to drive and it just go where you want it. The TR is mostly my fault trying to whip it into the hairpins. The GLA seems to slide a bit better now that I adjusted the rear turnbuckles. This car just needs more tuning. It is quit a bit faster and smoother than the GLA or the MR03. I just swapped over to my new TX and have some new rims and tires (different Offsets and compounds), that should keep me busy for a while. I’m also having to sort out a stripped servo arm on the GLA so it’s parked. |
I was able to try some different tires on the GLR last night. I went with some Kyosho radial 20 front and the car does not turn as well as with the pn slicks. It just pushes through the entire turn. One good thing is I can adjust the angle of attack and keep on the throttle. Bad thing is the left front tire is wearing fast for just one battery pack. Should I go back to Pn slicks or do you guys any other suggestions. All though I can stay on the throttle through the turn I have slowed .07 on my fast lap and added 15 seconds overall on my 75 lap stint. https://cimg5.ibsrv.net/gimg/www.rct...005bd64dd.jpeg |
I just got a pretty ripping run in on my Pro-Stock car. I have been playing with my LM chassis this morning and have it going pretty well. This was the third attempt on the cells so I was down on power but the car was super consistent after making a small change and only had about 6 seconds on forced errors. I broke into the 3's with a 394.5s. I will update my Pro-Stock times later on as I have to go be The Wee Man's driver today ;-) Duckman.....I am shooting for you next in the stock class ;-) Cheers, Jim |
https://cimg3.ibsrv.net/gimg/www.rct...a8eca7217d.png https://cimg4.ibsrv.net/gimg/www.rct...37f7342bb.jpeg Class-Stock Date- 5/11/19 Location- Norwalk CT Race Time- 399.7s Fastest Lap- 5.00 Chassis- MR03 RWD Body- azda 787B Wheelbase- 102mm Tires- F-PN KS Med Slick, R-PN KS Type Soft Radial Motor- PN70T Batteries- Amazon Basic Orion 1100 Front Springs- PN Purple T-Plate- Kyosho 6mm Carbon Motor Mount- Atomic LM Dampener (If applicable)- Dampener Fluid (If applicable)- Gearing-4.15:1 Notes-
Originally Posted by LJH
(Post 15436450)
https://cimg3.ibsrv.net/gimg/www.rct...212476d899.png https://cimg4.ibsrv.net/gimg/www.rct...3783e99ca.jpeg Class-Stock Date- 4/22/19 Location- Norwalk CT Race Time- 435.6 (7:15.6) Fastest Lap- 5.25 Chassis- MR03 RWD Body- 911 GT3 (991) Wheelbase- 90MM Tires- F-PN KS Med Slick, R-PN KS "F" Type Soft Radial Motor- PN70T Batteries- Amazon Basic 750mah AAA Front Springs- PN Purple with Kyosho MZW-416 Inner tube front Dampeners T-Plate- PN 4MM Carbon Long Motor Mount- Atomic RM Dampener (If applicable)- Kyosho MZW-216 Dampener Fluid (If applicable)- 20wt Gearing-11T Pinion on OEM Gear Diff Notes- |
That is quite a difference... I wonder about using super soft rear tires or firm fronts to try to balance the car more to your liking if you feel that it has too much steering. I would recommend against lowering steering angle on a track this size and with such tight corners.
|
Good day on the track. I have to say I have learned that the LM configuration is fast. I spent a lot of time trying to beat Duckman's stock time with my RM GT1 90mm chassis and just could not even get close, I got down to 410 which is a significant improvement to the my GT3's 435 (same set up) but still significantly off from Duckman's time. I swapped the motor out of my GT1 to the 787 and boom....first try yielded a 399.7.
I had similar luck running my LM chassis in Pro-Stock I spent a bit of time getting it sorted but the car felt good pretty quickly. After this morning's run I tried again and ended up with a 391.1s. I have to say having a time to chase is super fun.......I kind of feel like I cheated going to my LM car for stock but I tried really hard to get my 90mm chassis on pace and while I did not make it I did make the car MUCH faster then it was. That was fun. Cheers, Jim |
Originally Posted by EMU
(Post 15447789)
That is quite a difference... I wonder about using super soft rear tires or firm fronts to try to balance the car more to your liking if you feel that it has too much steering. I would recommend against lowering steering angle on a track this size and with such tight corners.
Cheers, Jim |
Open 4wd
This was from the other night. I had a pretty good run but trying too hard ends in traction rolls. I have to work on my consistency tomorrow. I’ll try some different tires and offsets. Class- Open 4WD Date-5/9 Location-Rotonda West, Florida Race Time-457.8 Fastest Lap-4.37 Chassis-GLA Body-GL Lexan P1 Wheelbase-94mm Tires-PN Motor-GL 5250 kv Batteries-Nano-Tech 300 mah Front Springs-stock T-Plate-n/a Motor Mount-stock Dampener (If applicable)-stock Dampener Fluid (If applicable)-30,000 Gearing-10t pinionhttps://cimg6.ibsrv.net/gimg/www.rct...64bea0b7c.jpeg https://cimg9.ibsrv.net/gimg/www.rct...df3187b5e.jpeg Notes- |
https://cimg3.ibsrv.net/gimg/www.rct...00b5b73af4.png Class- Open 4WD Date-5/12/19 Location- Norwalk Ct Race Time- 376.8 (6:15.8) Fastest Lap- 4.71s Chassis- GLRacing GLA V2 Body- Kyosho Autoscale R8 LMS 2015 Wheelbase- 98MM Tires- F- PN KS Med Slick R- PN KS Soft Radial Motor- GLRacing 3500KV Batteries- 280mah 2S Front Springs- Stock all around T-Plate-N/A Motor Mount- N/A Dampener (If applicable)- Stock Shocks Dampener Fluid (If applicable)- Associated 30K Gearing- 11T Pinon Notes- Set up as the manual suggests
Originally Posted by LJH
(Post 15437324)
https://cimg2.ibsrv.net/gimg/www.rct...8e50a8b0c4.png https://cimg8.ibsrv.net/gimg/www.rct...e0e7d654a.jpeg Class- Open 4WD Date-4/27/19 Location- Norwalk Ct Race Time- 383s (6:23.0) Fastest Lap- 4.79s Chassis- GLRacing GLA V2 Body- Kyosho Autoscale R8 LMS 2015 Wheelbase- 98MM Tires- F- PN KS Med Slick R- PN KS Soft Radial Motor- GLRacing 3500KV Batteries- 280mah 2S Front Springs- Stock all around T-Plate-N/A Motor Mount- N/A Dampener (If applicable)- Stock Shocks Dampener Fluid (If applicable)- Associated 30K Gearing- 11T Pinon Notes- Set up as the manual suggests |
Oh man....so close....I have done a 5s average lap over 20 laps but it is still alluding me when I try to hit that over 75 laps.
Before running this morning I gave the GLA a good cleaning and packed the dampeners. I was still getting a little hopping in turns and literally took a 1/4 of a turn on the rear camber links (a tiny bit more of negative camber) in the hopes it would cause the tire to slide a wee bit more and not catch the edge of the tire and this seemed to help a lot. The car felt totally hooked up on this run but I did have two decent taps with the armco...... MD, That was a smoking fast fast lap you did there. When you start to string those together you will kill it. Cheers, Jim |
Sadly... my last run on the 96 track as it will be going to another home. Spent a couple hours running the stock car (my other cars are too dialed in on the tracks I race at locally) and finished with my best run. I think I have one major park in the whole run - the rest of the laps were pretty clean. After seeing the last stock time I wanted to leave with a bang. https://cimg2.ibsrv.net/gimg/www.rct...35fa1ca7a.jpeg https://cimg4.ibsrv.net/gimg/www.rct...d102c8202.jpeg https://cimg8.ibsrv.net/gimg/www.rct...5a684f7370.png Class- Stock Date- May 12 2019 Location- Home Race Time- 365.2 Fastest Lap- 4.46 (with a few 4.50’s)- I have video of the lap times (scrolling through the result) but can’t upload here. Chassis- MR03 Body- Kyosho Audi R8 Wheelbase- 98 Tires- Kyosho 30fr / 20r Motor- PN 70 Batteries- Duracell 800 NiMh Front Springs- Unknown. Feel equal to PN yellow T-Plate- Pn 5 Motor Mount- PN Dampener (If applicable)- Dampener Fluid (If applicable)- Gearing- 7/44 |
| All times are GMT -7. It is currently 12:18 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.