Go Back  R/C Tech Forums > General Forums > Micro and Mini Scales
Mini-96 World Challenge >

Mini-96 World Challenge

Like Tree1021Likes

Mini-96 World Challenge

Old 03-31-2024, 09:48 PM
  #2101  
Tech Regular
 
Join Date: Jul 2021
Location: Central Texas
Posts: 266
Default

Class- MX-5
Date-03/31/2024
Location- Central Texas
Race Time- 5:38.176 / 338.176 seconds
Fastest Lap- 4.032 seconds
Chassis- MR03
Body- Mazda MX-5
Wheelbase- 90mm
Tires- F- N20mm +0mm PN BBS PN KS Med Low H. / R- W20mm -1mm Kyo- Kyo Soft Radial
Motor- PN 70T Ball Bearing
Batteries- Speed House 800
Front Springs- Yellow
T-Plate- Nexx #5 Carbon
Motor Mount- Nexx 90/94RM
Dampener (If applicable)- PN DDS Gold top/Purple bottom springs
Dampener Fluid (If applicable)- Dry
Gearing- 12/53 PN Gear Diff
Notes- FUN!

Poor_Boy and Traveler2 like this.

Last edited by BoxxerBoyDrew; 04-01-2024 at 12:30 AM. Reason: added pics
BoxxerBoyDrew is offline  
Old 03-31-2024, 09:53 PM
  #2102  
Tech Regular
 
Join Date: Jul 2021
Location: Central Texas
Posts: 266
Default

Class- Narrow
Date-03/31/2024
Location- Central Texas
Race Time- 5:35.241 / 335.241 seconds
Fastest Lap- 3.971 seconds
Chassis- MR03
Body- MX-5
Wheelbase- 90mm
Tires- F- N20mm 0mm PN BBS PN KS Med Low H. / R- N20mm 0mm PN Dish PN KS Soft
Motor- PN 70T Ball Bearing
Batteries- Speed House 800
Front Springs- Yellow
T-Plate- Nexx #5 Carbon
Motor Mount- Nexx 90/94mm RM
Dampener (If applicable)- PN DDS Gold top/Purple bottom springs
Dampener Fluid (If applicable)- Dry
Gearing- 12/53 PN Gear Diff
Notes- Fun but will tip on it's side if you rub an inside corner rail! TIME KILLER!

Traveler2 likes this.

Last edited by BoxxerBoyDrew; 04-01-2024 at 12:32 AM. Reason: added pics
BoxxerBoyDrew is offline  
Old 03-31-2024, 10:01 PM
  #2103  
Tech Regular
 
Join Date: Jul 2021
Location: Central Texas
Posts: 266
Default

Been super busy between moving my parents and remodeling our house, but I squeaked mine in! GREAT to see some new faces!!! I forgot to take a current pic of my 911, but the only thing different is I removed the top shock. I also haven't gotten by Hobby Town to get a transponder for my MX5/Narrow new chassis build so I took it off my 911 chassis, so it was a pain to remember what set of laps went with which class running the 3 with the same tanspo. #! I'm getting one this week. Also I waited over a month for a pair of Rocket brushless motors I ordered off Amazon, but they got lost somewhere, so I ordered a couple PN B-less motors from Kenon and they'll be here by thursday. When they arrive my BoxStock will be my only brushed motor. FOR ME and my limited experience, I can run faster and smoother with Brushless compared to brushed. When I switch from brushed to brushless on the MX5 hopefully it will smooth out and be more like my 911 as it's almost perfect!
Take Care and Drive Fast! Drew

Last edited by BoxxerBoyDrew; 04-01-2024 at 12:59 AM. Reason: added info
BoxxerBoyDrew is offline  
Old 04-01-2024, 05:17 PM
  #2104  
Tech Addict
iTrader: (1)
 
Join Date: May 2009
Location: Central NC, US
Posts: 636
Trader Rating: 1 (100%+)
Default March 2024 Results

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

We had a new entrant, welcome Raleigh, who ran 5 classes off the bat and the second newest entrant, HeyDay ran all 7 classes and the informal MX-5 class too! He also had progressively faster times in the faster classes, with the Open classes being the exception (sometimes slower is faster). BoxxerBoyDrew had four 3rd place finishes and is getting quicker by the month. We had some very close races in the MX-5 class and Porsche Cup with just 2 and 3 seconds separating 1st and 2nd.

Box Stock
1st - Traveler2/Marwan Zabaneh - 266.4/3.32s
2nd - PoorBoy/David Krinard - 276.2/3.40s
3rd - Chjosi - 334.2/3.87s
4th - BoxxerBoyDrew - 345.3/3.99s
5th - Raleigh - 351.6/3.98s
6th - HeyDay/Kristopher Theilen - 369.4/4.14s


Narrow Class
1st - Traveler2/Marwan Zabaneh - 265.0/3.33s
2nd - PoorBoy/David Krinard - 278.8/3.48s
3rd - BoxxerBoyDrew - 335.2/3.97s
4th - HeyDay/Kristopher Theilen - 353.5/4.28s
5th - Raleigh - 375.2/4.54s


Unofficial Open MX-5 Class
1st - Traveler2/Marwan Zabaneh - 273.5/3.43s
2nd - PoorBoy/David Krinard - 275.6/3.47s
3rd - BoxxerBoyDrew - 338.2/4.03s
4th - HeyDay/Kristopher Theilen - 370.0/4.25s
5th - Chjosi - 407.5/3.88s


Porsche Cup Class
1st - PoorBoy/David Krinard - 261.9/3.27s
2nd - Traveler2/Marwan Zabaneh - 264.8/3.33s
3rd - BoxxerBoyDrew - 315.2/3.67s
4th - Raleigh - 341.0/4.12s
5th - HeyDay/Kristopher Theilen - 350.9/4.21s


Stock Class
1st - Traveler2/Marwan Zabaneh - 245.2/3.08s
2nd - PoorBoy/David Krinard - 257.8/3.14s

3rd - BoxxerBoyDrew - 322.7/3.78s
4th - HeyDay/Kristopher Theilen - 332.7/3.90s


Pro Stock
1st - PoorBoy/David Krinard - 261.7/3.23s
2n -
HeyDay/Kristopher Theilen - 325.8/3.89s

Open 2WD
1st - Traveler2/Marwan Zabaneh - 241.4/2.96s
2nd - PoorBoy/David Krinard - 256.0/3.12s
3rd - HeyDay/Kristopher Theilen - 338.2/4.00s
4th - Raleigh - 352.0/4.03s


Open AWD
1st - PoorBoy/David Krinard - 262.8/3.13s
2nd - HeyDay/Kristopher Theilen - 370.9/4.14s

3rd - Raleigh - 382.7/4.32s

FTM goes to me in my Open 2WD car with a blistering 2.96 fast lap!

If anyone was late, please post up and I will update the results. Also please check my tabulations and let me know if I made any mistakes. I didn't see any entries on Facebook for March, but let me know if I missed someone.

Cheers,
Traveler2
chjosi, HeyDay and BoxxerBoyDrew like this.

Last edited by Traveler2; 04-01-2024 at 06:41 PM.
Traveler2 is offline  
Old 04-01-2024, 05:21 PM
  #2105  
Tech Addict
iTrader: (1)
 
Join Date: May 2009
Location: Central NC, US
Posts: 636
Trader Rating: 1 (100%+)
Default April 2024 Layout

For April, we will keep the March layout, but will run it counterclockwise. Drive fast!



HeyDay likes this.
Traveler2 is offline  
Old 04-02-2024, 08:30 AM
  #2106  
Tech Initiate
 
Join Date: Dec 2014
Location: Santa Rosa, California
Posts: 36
Smile

Originally Posted by Traveler2
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

We had a new entrant, welcome Raleigh, who ran 5 classes off the bat and the second newest entrant, HeyDay ran all 7 classes and the informal MX-5 class too! He also had progressively faster times in the faster classes, with the Open classes being the exception (sometimes slower is faster). BoxxerBoyDrew had four 3rd place finishes and is getting quicker by the month. We had some very close races in the MX-5 class and Porsche Cup with just 2 and 3 seconds separating 1st and 2nd.

Box Stock
1st - Traveler2/Marwan Zabaneh - 266.4/3.32s
2nd - PoorBoy/David Krinard - 276.2/3.40s
3rd - Chjosi - 334.2/3.87s
4th - BoxxerBoyDrew - 345.3/3.99s
5th - Raleigh - 351.6/3.98s
6th - HeyDay/Kristopher Theilen - 369.4/4.14s


Narrow Class
1st - Traveler2/Marwan Zabaneh - 265.0/3.33s
2nd - PoorBoy/David Krinard - 278.8/3.48s
3rd - BoxxerBoyDrew - 335.2/3.97s
4th - HeyDay/Kristopher Theilen - 353.5/4.28s
5th - Raleigh - 375.2/4.54s


Unofficial Open MX-5 Class
1st - Traveler2/Marwan Zabaneh - 273.5/3.43s
2nd - PoorBoy/David Krinard - 275.6/3.47s
3rd - BoxxerBoyDrew - 338.2/4.03s
4th - HeyDay/Kristopher Theilen - 370.0/4.25s
5th - Chjosi - 407.5/3.88s


Porsche Cup Class
1st - PoorBoy/David Krinard - 261.9/3.27s
2nd - Traveler2/Marwan Zabaneh - 264.8/3.33s
3rd - BoxxerBoyDrew - 315.2/3.67s
4th - Raleigh - 341.0/4.12s
5th - HeyDay/Kristopher Theilen - 350.9/4.21s


Stock Class
1st - Traveler2/Marwan Zabaneh - 245.2/3.08s
2nd - PoorBoy/David Krinard - 257.8/3.14s

3rd - BoxxerBoyDrew - 322.7/3.78s
4th - HeyDay/Kristopher Theilen - 332.7/3.90s


Pro Stock
1st - PoorBoy/David Krinard - 261.7/3.23s
2n -
HeyDay/Kristopher Theilen - 325.8/3.89s

Open 2WD
1st - Traveler2/Marwan Zabaneh - 241.4/2.96s
2nd - PoorBoy/David Krinard - 256.0/3.12s
3rd - HeyDay/Kristopher Theilen - 338.2/4.00s
4th - Raleigh - 352.0/4.03s


Open AWD
1st - PoorBoy/David Krinard - 262.8/3.13s
2nd - HeyDay/Kristopher Theilen - 370.9/4.14s

3rd - Raleigh - 382.7/4.32s

FTM goes to me in my Open 2WD car with a blistering 2.96 fast lap!

If anyone was late, please post up and I will update the results. Also please check my tabulations and let me know if I made any mistakes. I didn't see any entries on Facebook for March, but let me know if I missed someone.

Cheers,
Traveler2
Great driving everyone, and Thank You Marwan! It's great to see everyone's times; I hope you're all having as much fun with this as I am!
Poor_Boy, chjosi and BoxxerBoyDrew like this.
HeyDay is offline  
Old 04-11-2024, 09:29 AM
  #2107  
Tech Regular
 
Join Date: Jul 2021
Location: Central Texas
Posts: 266
Default

I've been playing with wheels and with some -1mm N DXR MP1 wheels I was able to go to the wide frontend on my 911 Gt3 RSR, and it made a great car even better! Also got some -1 W DXR MP1 wheels and they fit great under my MX-5 with some Low Height PN KSM soft slicks, and they rip too! I've been driving everyday I'm home from packing up the farm trying to get more consistent CCW , but my mind just likes turning right. LOL I also received the PN 3500k BL motors, so now my Narrow and Stock Chassis are brushless! So far my laps are a bit slower but overall times are better, but hopefully by the end of the month my lap times will be better! Either way I like the consistent feel of the BL motors, their quiet, and you can adjust them with the ICS to your liking! Looking forward to see everyone's times at the end of the month.
Drive Fast and Stay Safe! Drew
HeyDay likes this.
BoxxerBoyDrew is offline  
Old 04-11-2024, 11:30 AM
  #2108  
Tech Addict
iTrader: (1)
 
Join Date: May 2009
Location: Central NC, US
Posts: 636
Trader Rating: 1 (100%+)
Default

Originally Posted by BoxxerBoyDrew
I've been playing with wheels and with some -1mm N DXR MP1 wheels I was able to go to the wide frontend on my 911 Gt3 RSR, and it made a great car even better! Also got some -1 W DXR MP1 wheels and they fit great under my MX-5 with some Low Height PN KSM soft slicks, and they rip too! I've been driving everyday I'm home from packing up the farm trying to get more consistent CCW , but my mind just likes turning right. LOL I also received the PN 3500k BL motors, so now my Narrow and Stock Chassis are brushless! So far my laps are a bit slower but overall times are better, but hopefully by the end of the month my lap times will be better! Either way I like the consistent feel of the BL motors, their quiet, and you can adjust them with the ICS to your liking! Looking forward to see everyone's times at the end of the month.
Drive Fast and Stay Safe! Drew
Cool! Post up some pics of the cars with the new parts when you can.
Traveler2 is offline  
Old 04-11-2024, 10:44 PM
  #2109  
Tech Regular
 
Join Date: Jul 2021
Location: Central Texas
Posts: 266
Default


Stock chassis w/PN 3500kv, and i switched from 787 to 12C to get better through the corners going CCW.


DXR -1mm W Rear wheels w/PN KS-M Soft Low height and PN 3500kv. Excuse the marker on one side of the body, as I'm planning paint schemes.


911 GT3 RSR w/ Wide front end and -1mm N DXR wheels. In the pics it looks as the front wheel nuts stick out beyond the body, but using a ruler they go through the full range of motion without any contact. Weird pic effect.

Drive Fast and Stay Safe! Drew

Last edited by BoxxerBoyDrew; 04-12-2024 at 03:59 PM. Reason: Added info
BoxxerBoyDrew is offline  
Old 04-12-2024, 06:46 AM
  #2110  
Tech Fanatic
iTrader: (24)
 
Join Date: Oct 2013
Posts: 785
Trader Rating: 24 (100%+)
Default

Originally Posted by BoxxerBoyDrew
Stock chassis w/PN 3500kv, and i switched from 787 to 12C to better get through the corners CCW better.
Are you using the factory settings on your evo board, or something custom?
chjosi is offline  
Old 04-12-2024, 10:33 AM
  #2111  
Tech Regular
 
Join Date: Jul 2021
Location: Central Texas
Posts: 266
Default

I use the factory settings except I turned the reverse delay to lowest and the drag break up 1 level.
BoxxerBoyDrew is offline  
Old 04-12-2024, 07:38 PM
  #2112  
Tech Fanatic
iTrader: (24)
 
Join Date: Oct 2013
Posts: 785
Trader Rating: 24 (100%+)
Default

Originally Posted by BoxxerBoyDrew
I use the factory settings except I turned the reverse delay to lowest and the drag break up 1 level.
Thanks. I have a PN V2 ESC that keeps losing calibration. I would like to keep it, but may have to find something else if it keeps losing its mind.
chjosi is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.