|
Originally Posted by ronnie_space
(Post 16117254)
Just built running chassis so just about to fit. But just realised the kit pinion does not fit the motor shaft.
|
Originally Posted by Mac The Knife
(Post 16117256)
The HW motor has an 1/8th inch shaft,,,,, I used a Hot Racing 18 tooth pinion gear. They are a 0.5 mod gear.
|
Originally Posted by ronnie_space
(Post 16117257)
Thanks for the recommend - just need to find one - all seem out of stock online.
|
Originally Posted by Mac The Knife
(Post 16117329)
These from LC Racing will work. They have an 1/8th inch bore. https://casterracingmi.com/index.php...roduct_id=1604
|
Wouldn't deliver to UK so I have sourced/ordered this.
M0.5 Module 0.5 0.5M 18T 18 Teeth Tooth Motor Pinion Gear Black 540 3.175mm Bore |
Originally Posted by ronnie_space
(Post 16117255)
Do anyone know if I need to run the fan with this or can I leave off? Seems rather high in height ESC plus fan.
|
I don't know for sure - but would guess that you'll be OK without it.
Check temps after a 5min run maybe? |
Anyone having issues blowing out shocks? Can we buy replacement shock seal kits for these?
|
Originally Posted by HotLaps
(Post 16119404)
Anyone having issues blowing out shocks? Can we buy replacement shock seal kits for these?
|
It has a center diff, which is kind of awesome. Given the popularity of the mini 8 and the LC Racing 1/14 rigs, this has a decent shot.
Might come with cvds standard (can’t tell yet) so between those and the center diff it seems very competitive and well-priced. |
|
Originally Posted by keuk
(Post 16145884)
rms1776 Did you cut the original shaft cover to make the clamp for engine and diff bearing ?
|
New motor mount
https://cimg8.ibsrv.net/gimg/www.rct...539fbbd66f.jpg
https://cimg7.ibsrv.net/gimg/www.rct...98a6264789.jpg It is a sliding motor mount that can fit a 16t, 17t & 18t pinion. Reason for making is so that I can get the motor lower to the chassis and the motor is more secure. |
AWESOME WORK on the custom chassis!!! U got skills!!!
|
Originally Posted by rms1776
(Post 16147794)
https://cimg8.ibsrv.net/gimg/www.rct...539fbbd66f.jpg
https://cimg7.ibsrv.net/gimg/www.rct...98a6264789.jpg It is a sliding motor mount that can fit a 16t, 17t & 18t pinion. Reason for making is so that I can get the motor lower to the chassis and the motor is more secure. |
| All times are GMT -7. It is currently 06:00 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.
