I purchased two of your 2 cell 6500 packs for my Savage flux I have had trouble with one pack being run down more than the other dangerously low. I was told I should set the lipo cut off to 12v can you confirm this seems very odd to me. Thanks

The Monster esc uses a soft cut off which if started again after it stops the first time will and can pull a pack past the LVC point. I would suggest you set the cut off to 3.2 or 3.4 volts per cell. That will give you a bit of a cushion area and it's also better on the packs. That's what I run my 1/8 th scale stuff at after seeing an 8000 pack do the same thing in my EX-1 buggy. Since then no problems.

Jason