View Poll Results: JPRaceway : On-road or Off-road?
On-Road
60
69.77%
Off-Road
26
30.23%
Voters: 86. You may not vote on this poll
1LikesThe Big Locked Thread
06-22-2010, 06:12 AM
lf
mga sir sino po bang may charger ng katulad nag kay champion po?
Extreme X-605 Li-Po Balance Charger
baka may second hand kayo dyan na pwede i let go?
pm me your offers
abeachbumbear -ym
complete sana yung mga plugs nya po huh?
Extreme X-605 Li-Po Balance Charger
baka may second hand kayo dyan na pwede i let go?
pm me your offers
abeachbumbear -ym
complete sana yung mga plugs nya po huh?
06-22-2010, 06:39 AM
L/F
spektrum ds 821 servo
09164306651
spektrum ds 821 servo
09164306651
06-22-2010, 06:43 AM
Tech Apprentice
iTrader: (3)
Futaba 4Pk - 14k guaranteed very fresh. the only marks it has is it's bottom. yung LCD niya and light laging nakapatay para hindi mapundi. like new pa LCD niya and LED light. :sleep:
with BOX, 604 receiver and manual and everything else there is in the box pa. pati box niya maganda pa den.
BLS451 - 3.5k glitch free. bihira lang din magamit kasi hindi rin ako maka-drift gaano (comes with box/case)
to follow na lang yung pic ng servo
Novak Slydr 8.5T - 8.5k guaranteed fresh! bihira lang din magamit. wires are still in it's original state. bought it july or aug of 2009. lapit na mag 1year.
hindi po ako nagmamadali magbenta. kung meron lang gusto kumuha. these items are guaranteed fresh, less than 1year old and hardly used kasi hindi ako makapunta ng driftmeets as often as i want.
items are negotiable.
kayo na magpm ng gusto niyong price. tingnan ko kung kaya ko.
with BOX, 604 receiver and manual and everything else there is in the box pa. pati box niya maganda pa den.
BLS451 - 3.5k glitch free. bihira lang din magamit kasi hindi rin ako maka-drift gaano (comes with box/case)
to follow na lang yung pic ng servo
Novak Slydr 8.5T - 8.5k guaranteed fresh! bihira lang din magamit. wires are still in it's original state. bought it july or aug of 2009. lapit na mag 1year.
hindi po ako nagmamadali magbenta. kung meron lang gusto kumuha. these items are guaranteed fresh, less than 1year old and hardly used kasi hindi ako makapunta ng driftmeets as often as i want.
items are negotiable.
kayo na magpm ng gusto niyong price. tingnan ko kung kaya ko.
Last edited by dencio1976; 06-23-2010 at 05:23 PM.
06-22-2010, 06:49 AM
FS: Stanley Tool Box
done
Last edited by sylver3rd; 08-29-2010 at 05:17 PM.
06-22-2010, 06:50 AM
...
Last edited by kariton_07; 06-23-2010 at 09:40 AM.
06-22-2010, 07:12 AM
FOR SALE!!!
.....
Last edited by bentoy101; 06-23-2010 at 03:27 AM.
06-22-2010, 07:16 AM
FOR SALE!!!
KITS, RADIO,ESC,RX,SERVOS,WHEELS, ETC ;D
1) NEW COND. Hpi SC-15 ESC and FIREBOLT 15 turn Motor COMBO 2,700- NOW 2,300 php only!!NEGOTIABLE!
Twice used only..came from my BNEW Hpi Blitz..VERY FAST MOTOR AND SMOOTH ESC!!!PERFECT Combo for Drifting SUPER RACE WORTHY
2) BNEW Hpi TF-1 Radio and BNEW Tamiya Tru-02 receiver 1,500 php Only!
both bnew..am channel..FREE crystal ;D pulled out from my bnew blitz.GLITCH FREE!!
3) BNEW Traxxas TQ radio and BNEW Tamiya Tru-02 receiver 1500 php Only!
both bnew..am channel..FREE crystal Pulled out from my slash. GLITCH FREE~
4) Once used tamiya Onroad Foam Inserts 350 php 0nly!
Came from one of my kits.
5) BNEW Tamiya Mesh Rims Bronze/Gray color 600 php Only!
FREE slick tires..
6) Once used Tamiya Slick Tires 350 php only!
7) Xracing (RC18t) 4WD 1/18 scale Racing Truggy RESERVED!
8) Tamiya GT Tuned Motor 350 php only!!
Needs new brushes about 200php lang.. ;D
ITEM IS IN CEBU
I do shipping thru LBC
Pm me or Text me 09235753444
David Suico here :-)
1) NEW COND. Hpi SC-15 ESC and FIREBOLT 15 turn Motor COMBO 2,700- NOW 2,300 php only!!NEGOTIABLE!
Twice used only..came from my BNEW Hpi Blitz..VERY FAST MOTOR AND SMOOTH ESC!!!PERFECT Combo for Drifting SUPER RACE WORTHY
2) BNEW Hpi TF-1 Radio and BNEW Tamiya Tru-02 receiver 1,500 php Only!
both bnew..am channel..FREE crystal ;D pulled out from my bnew blitz.GLITCH FREE!!
3) BNEW Traxxas TQ radio and BNEW Tamiya Tru-02 receiver 1500 php Only!
both bnew..am channel..FREE crystal Pulled out from my slash. GLITCH FREE~
4) Once used tamiya Onroad Foam Inserts 350 php 0nly!
Came from one of my kits.
5) BNEW Tamiya Mesh Rims Bronze/Gray color 600 php Only!
FREE slick tires..
6) Once used Tamiya Slick Tires 350 php only!
7) Xracing (RC18t) 4WD 1/18 scale Racing Truggy RESERVED!
8) Tamiya GT Tuned Motor 350 php only!!
Needs new brushes about 200php lang.. ;D
ITEM IS IN CEBU
I do shipping thru LBC
Pm me or Text me 09235753444
David Suico here :-)
06-22-2010, 07:26 AM
savage ss 4.6
for sale:
savage ss 4.6............................................... .......................P16k na lang
fully hop-up kit only no elecs.
kapag rtr............................................... ..............................P21k na lang
check the pics or my previous post for specs
w/jr r-1 radio and futaba 9402 steering servo and traxxas throttle servo
too many hop-up to mention
until sunday lang po ang price nito just need money lang and rush sacrifice sale
call/txt............................................... .....09167159003
valenzuela area only
see to appreciate
savage ss 4.6............................................... .......................P16k na lang
fully hop-up kit only no elecs.
kapag rtr............................................... ..............................P21k na lang
check the pics or my previous post for specs
w/jr r-1 radio and futaba 9402 steering servo and traxxas throttle servo
too many hop-up to mention
until sunday lang po ang price nito just need money lang and rush sacrifice sale
call/txt............................................... .....09167159003
valenzuela area only
see to appreciate
check my previous post na lang for some pics
06-22-2010, 08:23 AM
R/C For sale Tamiya TT01 parts
R/C For sale Tamiya TT01 parts
All Brand new parts and available NOW
2nd hand parts will be stated if the item is used and its condition
ESC TEU-104Bk = 600
Reciever TRU03 = 500
Servo TP-S3010 = 600
STOCK
TT01 Part A = 500
Tamiya TT01 tub = 500
Part B =500
TT01 E Part A = 500
TT01 P Part = 400
TT01 Gear spare 500
TT01 shaft set = 500
RC Urethane Bumper M Blue - TT-01 = 250
pinion 19t and 18t = 250
UPGRADE
RC M03R Alum Rear Upright - Blue =
Durable and precision aluminum upright with toe-in 1.5 degrees provides stable cornering.
Motor Dynatech = used but still in good condition = 500
Bearing set for TT01 Brandnew = 500 (set 12pcs)
Tamiya GT tuned motor (brand new) = 650
TX RX crystal = 350
1 pair = 27.145 AM
1 pair = 27.255 AM
reference pic only
tamiya spring set = 500
TT01 graphite shock tower stiffener (3racing ) = 1000
Tamiya 53790 Cup joint for universal shaft for TT01 = 300
RC TT-01 Alum Motor Heat Sink = 300
this came with my TT01 D (never used good as brand new)
RFS:got a motor heat sink with fan
RIMS
Rims with slick tires = 600
Rim star (white) = 400
Rims mugen = 400
Rims Tunner (Silver) = 400
Rim 1(2 offset)= 400
Drift Tech 24mm = 600
PVC drift Tire for practice use only = 200
BATTERY
Turnigy 7.4 V 2200mah 2S 20 -30c (Brand new) = 1.2k
Nicad Battery 7.2V 17000mah = 700 - ( 1 battery available )
BODY SHELL
Tamiya honda civic Eg with rims and side mirror = 1.8k
Tamiya Body shell honda Integra unpainted = 1800
Cannot post pic yet pls pm your email for the picture.
location Basak Mandaue City CEBU
# 09198147627
RFS:extra Item
-will ship to any part of the phillipine tru LBC (shipping cost shoulder by the buyer or depends on the agrement of both parties thanks)
All Brand new parts and available NOW
2nd hand parts will be stated if the item is used and its condition
ESC TEU-104Bk = 600
Reciever TRU03 = 500
Servo TP-S3010 = 600
STOCK
TT01 Part A = 500
Tamiya TT01 tub = 500
Part B =500
TT01 E Part A = 500
TT01 P Part = 400
TT01 Gear spare 500
TT01 shaft set = 500
RC Urethane Bumper M Blue - TT-01 = 250
pinion 19t and 18t = 250
UPGRADE
RC M03R Alum Rear Upright - Blue =
Durable and precision aluminum upright with toe-in 1.5 degrees provides stable cornering.
Motor Dynatech = used but still in good condition = 500
Bearing set for TT01 Brandnew = 500 (set 12pcs)
Tamiya GT tuned motor (brand new) = 650
TX RX crystal = 350
1 pair = 27.145 AM
1 pair = 27.255 AM
reference pic only
tamiya spring set = 500
TT01 graphite shock tower stiffener (3racing ) = 1000
Tamiya 53790 Cup joint for universal shaft for TT01 = 300
RC TT-01 Alum Motor Heat Sink = 300
this came with my TT01 D (never used good as brand new)
RFS:got a motor heat sink with fan
RIMS
Rims with slick tires = 600
Rim star (white) = 400
Rims mugen = 400
Rims Tunner (Silver) = 400
Rim 1(2 offset)= 400
Drift Tech 24mm = 600
PVC drift Tire for practice use only = 200
BATTERY
Turnigy 7.4 V 2200mah 2S 20 -30c (Brand new) = 1.2k
Nicad Battery 7.2V 17000mah = 700 - ( 1 battery available )
BODY SHELL
Tamiya honda civic Eg with rims and side mirror = 1.8k
Tamiya Body shell honda Integra unpainted = 1800
Cannot post pic yet pls pm your email for the picture.
location Basak Mandaue City CEBU
# 09198147627
RFS:extra Item
-will ship to any part of the phillipine tru LBC (shipping cost shoulder by the buyer or depends on the agrement of both parties thanks)
06-22-2010, 09:00 AM
dx3s
sold
Last edited by infection; 06-23-2010 at 08:09 PM.
06-22-2010, 10:20 AM
rc convention
to all R.C ENTHUSIAST,
GOOOD DAY!!!! we have an r.c show to be held in MANILA OCEAN PARK located in manila near luneta and manila hotel, the manila ocean park organize this event and invite all the r.c addicts and r.c shops to join this event on july 24 2010, all flyers, boaters, drifters, crawlers and offroaders you can join the exhibit and games. we have micro heli competitions, crawler, competitions and other games to be announce soon. and for those who wants to sell their r.c stuff there are booths for you. for those who are interested to join you may contact this number 0927-386-8095. rem
GOOOD DAY!!!! we have an r.c show to be held in MANILA OCEAN PARK located in manila near luneta and manila hotel, the manila ocean park organize this event and invite all the r.c addicts and r.c shops to join this event on july 24 2010, all flyers, boaters, drifters, crawlers and offroaders you can join the exhibit and games. we have micro heli competitions, crawler, competitions and other games to be announce soon. and for those who wants to sell their r.c stuff there are booths for you. for those who are interested to join you may contact this number 0927-386-8095. rem
06-22-2010, 10:36 AM
.....
Last edited by jdm_ae92; 06-05-2011 at 11:11 AM.
06-22-2010, 05:07 PM
Any ONE interested to order parts,airplane,boat please visit www.cyclonetoy.com
order will be on June 21 to june 26
for inquire 09164306651
Note Pls include the item number of the item that you wont to inquire.
Thanks
Pls. visit our website
www.cyclonetoy.com
www.alphamodel.ucoz.com
for inquire Globe 09164306651
IN STOCK NEW SERVO!!!!
IN STOCK NEW SERVO!!!
[COLOR="Red"]HS-M7990TH Mega Torque HV Magnetic Encoder Servo LIMITED STOCK ONLY
Hitec's most technologically advanced servo, the "Monster Torque" HS-M7990TH features an ultra precise high resolution magnetic encoder instead of a conventional mechanical potentiometer. Designed to operate on a two cell LiPo Pack the HS-M7990TH features our newest high resolution "G2.5" 12 bit generation programmable digital circuit and our indestructible Titanium gears. Other features of the HS-M7990TH include a 7.4V optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by brass axialbushings.
Features
* High Resolution Magnetic Digital Ecoder
* G2.5 12 bit Digital Brogrammable Circuit
* Titanium Gear Train (MK first gear)
* Ultra Performance Coreless Motor
* Integrated Heatsink Case
* (8) O-Rings for Water/Dust/Fuel protection
* Dual Ball Bearing Supported Output Shaft
* 10% larger than a HS-7955TG
Programmable Features Include:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Point
- Resolution* (default is high resolution)
- Overload Protection* (default is off)
*These features are only programmable with the HFP-20, HPP-20 or HPP-21 programmers.
Specifications
Motor Type: Coreless
Bearing Type: Dual Ball Bearing
Speed (6.0V/7.4V): 0.20 / 0.17
Torque oz./in. (6.0V/7.4V): 500 / 611
Torque kg./cm. (6.0V/7.4V): 36 / 44
Size in Inches: 1.72 x 0.88 x 1.57
Size in Millimeters: 44 x 22 x 40
Weight oz.: 2.73
Weight g.: 76.5
Hitec 7955TG in stock 3,500 Free shipping
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-6.0 Volts
Operating Temperature Range: -20° to +60° C (-68°F to +140°F)
Operating Speed (4.8V): 0.19 sec/60° at no load
Operating Speed (6.0V): 0.15 sec/60° at no load
Stall Torque (4.8V): 250oz/in. (18kg.cm)
Stall Torque (6.0V): 333oz/in. (24kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 9mA at stop
Idle Current Drain (6.0V): 9mA at stop
Current Drain (4.8V): 220mA/idle and 3.4 amps at lock/stall
Current Drain (6.0V): 300mA/idle and 4.2 amps at lock/stall
Dead Band Width: 1usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: Titanium Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x
Hitech HS7950 3,800 free shipping
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-7.4 Volts
Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
perating Speed (4.8V): 0.18 sec/60° at no load
Operating Speed (6.0V): 0.15 sec/60° at no load
Operating Speed (7.4V): 0.13 sec/60° at no load
Stall Torque (4.8V): 344oz/in. (22kg.cm)
Stall Torque (6.0V): 402oz/in. (29kg.cm)
Stall Torque (7.4V): 486oz/in. (35kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 9mA at stop
Idle Current Drain (6.0V): 9mA at stop
Current Drain (4.8V): 220mA/idle and 3.8 amps at lock/stall
Current Drain (6.0V): 300mA/idle and 4.8 amps at lock/stall
Dead Band Width: 1usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: Titanium Gears
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.57" x 0.79"x 1.50" (40 x 20 x 38mm)
Weight: 2.40oz (68g)
hitec HS7985 3,000 free shipping
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-6.0 Volts
Operating Temperature Range: -20° to +60° C (-4°F to +140°F)
Operating Speed (4.8V): 0.16sec/60° at no load
Operating Speed (6.0V): 0.13sec/60° at no load
Stall Torque (4.8V): 144oz/in. (10.4kg.cm)
Stall Torque (6.0V): 172oz/in. (12.4kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 3mA at stop
Idle Current Drain (6.0V): 3mA at stop
Current Drain (4.8V): 200mA/idle and 2.0 amps at lock/stall
Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall
Dead Band Width: 2usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: 3 Metal, 1 Metal Karbonite Gear
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x 37mm)
Weight: 2.18oz (62g)
Aluminum gasolone filter 750.00 each ship
Selling price 4,800 php Reprice 3,500
Flitecraft SOLO 3
Selling price 5,500 php reprice 4,500
for inq. 09164306651
New DLE55 55CC Gasoline Engine 16,500 in stock
1.The Cylinder and Crank Case made by new Technology-Compression Molding!
2.Electromagnetic shielding Sensor;
New DLE30 30cc gasoline engine 13,500 [B[/B] instock
Accesories
Volts Monitor TM (DC 3.7-20V LCD VOLTMETER 1,750.00.00
Opto Gas Engine Kill Switch 700.00
3 BLADE aluminum Spinner 3.5" 1,100.00
ALUMINUM SPINNER 3" 1,100.00 ship
Gasoline fuel host 50.00/ft
nitro fuel host 70.00 /ft
Fueltank for nitro and gas 1000CC 190x95x77(mm) Sold out
fuel tank for nitro and gas 500cc 450.00
http://www.cyclonetoy.com/list_1.asp?id=1216
Heavy duty servo cable 300mm 100.00 ea.
Heavy duty servo cable 600mm 150.00 ea.
Hinges 500.00 set (20pcs)
T plug connector 3 pcs set male and female 150.00
Program card 450.00
http://www.cyclonetoy.com/list_1.asp?id=122
Telemetry Combo Pack 2,800,000
Key Features
* Monitors temperature to maximize performance and eliminate costly rebuilds
* Battery voltage display prevents runaway crashes
* RPM display shows top-end speed
* Quality of signal monitors RF link strength
* Lap Counter/Timer helps analyze results of performance tweaks
Heat shrinkable tube for battery
size 4"x19" 140.00
2.5"x19" 110.00
prop adapter free shipping
size 5mm shaft 650.00
4mm shaft 530.00
3.17mm shaft 530.00
Pull-Pull system for giant scale 1 set 650.00 free shipping
Nitro spinner
size 2" 250.00 each
prop. nut spinner
3/8" 450.00
World model La Racer 40 6k reprice to 5,000
MagichandRC Yak 54 50cc airframe 15,000
30% YAK54 87in
Length: 1919mm(75.6in)
Wingspan: 2210mm (87in)
Wing area: 87.4dm2(1354sq in)
Engine 50-60cc gas
Weight: 7.3-7.7kg (16-17 lbs)
Radio: 4ch-6ch
09164306651
order will be on June 21 to june 26
for inquire 09164306651
Note Pls include the item number of the item that you wont to inquire.
Thanks
Pls. visit our website
www.cyclonetoy.com
www.alphamodel.ucoz.com
for inquire Globe 09164306651
IN STOCK NEW SERVO!!!!
IN STOCK NEW SERVO!!!
[COLOR="Red"]HS-M7990TH Mega Torque HV Magnetic Encoder Servo LIMITED STOCK ONLY
Hitec's most technologically advanced servo, the "Monster Torque" HS-M7990TH features an ultra precise high resolution magnetic encoder instead of a conventional mechanical potentiometer. Designed to operate on a two cell LiPo Pack the HS-M7990TH features our newest high resolution "G2.5" 12 bit generation programmable digital circuit and our indestructible Titanium gears. Other features of the HS-M7990TH include a 7.4V optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by brass axialbushings.
Features
* High Resolution Magnetic Digital Ecoder
* G2.5 12 bit Digital Brogrammable Circuit
* Titanium Gear Train (MK first gear)
* Ultra Performance Coreless Motor
* Integrated Heatsink Case
* (8) O-Rings for Water/Dust/Fuel protection
* Dual Ball Bearing Supported Output Shaft
* 10% larger than a HS-7955TG
Programmable Features Include:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Point
- Resolution* (default is high resolution)
- Overload Protection* (default is off)
*These features are only programmable with the HFP-20, HPP-20 or HPP-21 programmers.
Specifications
Motor Type: Coreless
Bearing Type: Dual Ball Bearing
Speed (6.0V/7.4V): 0.20 / 0.17
Torque oz./in. (6.0V/7.4V): 500 / 611
Torque kg./cm. (6.0V/7.4V): 36 / 44
Size in Inches: 1.72 x 0.88 x 1.57
Size in Millimeters: 44 x 22 x 40
Weight oz.: 2.73
Weight g.: 76.5
Hitec 7955TG in stock 3,500 Free shipping
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-6.0 Volts
Operating Temperature Range: -20° to +60° C (-68°F to +140°F)
Operating Speed (4.8V): 0.19 sec/60° at no load
Operating Speed (6.0V): 0.15 sec/60° at no load
Stall Torque (4.8V): 250oz/in. (18kg.cm)
Stall Torque (6.0V): 333oz/in. (24kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 9mA at stop
Idle Current Drain (6.0V): 9mA at stop
Current Drain (4.8V): 220mA/idle and 3.4 amps at lock/stall
Current Drain (6.0V): 300mA/idle and 4.2 amps at lock/stall
Dead Band Width: 1usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: Titanium Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x
Hitech HS7950 3,800 free shipping
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-7.4 Volts
Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
perating Speed (4.8V): 0.18 sec/60° at no load
Operating Speed (6.0V): 0.15 sec/60° at no load
Operating Speed (7.4V): 0.13 sec/60° at no load
Stall Torque (4.8V): 344oz/in. (22kg.cm)
Stall Torque (6.0V): 402oz/in. (29kg.cm)
Stall Torque (7.4V): 486oz/in. (35kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 9mA at stop
Idle Current Drain (6.0V): 9mA at stop
Current Drain (4.8V): 220mA/idle and 3.8 amps at lock/stall
Current Drain (6.0V): 300mA/idle and 4.8 amps at lock/stall
Dead Band Width: 1usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: Titanium Gears
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.57" x 0.79"x 1.50" (40 x 20 x 38mm)
Weight: 2.40oz (68g)
hitec HS7985 3,000 free shipping
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-6.0 Volts
Operating Temperature Range: -20° to +60° C (-4°F to +140°F)
Operating Speed (4.8V): 0.16sec/60° at no load
Operating Speed (6.0V): 0.13sec/60° at no load
Stall Torque (4.8V): 144oz/in. (10.4kg.cm)
Stall Torque (6.0V): 172oz/in. (12.4kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 3mA at stop
Idle Current Drain (6.0V): 3mA at stop
Current Drain (4.8V): 200mA/idle and 2.0 amps at lock/stall
Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall
Dead Band Width: 2usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: 3 Metal, 1 Metal Karbonite Gear
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x 37mm)
Weight: 2.18oz (62g)
Aluminum gasolone filter 750.00 each ship
Selling price 4,800 php Reprice 3,500
Flitecraft SOLO 3
Selling price 5,500 php reprice 4,500
for inq. 09164306651
New DLE55 55CC Gasoline Engine 16,500 in stock
1.The Cylinder and Crank Case made by new Technology-Compression Molding!
2.Electromagnetic shielding Sensor;
New DLE30 30cc gasoline engine 13,500 [B[/B] instock
Accesories
Volts Monitor TM (DC 3.7-20V LCD VOLTMETER 1,750.00.00
Opto Gas Engine Kill Switch 700.00
3 BLADE aluminum Spinner 3.5" 1,100.00
ALUMINUM SPINNER 3" 1,100.00 ship
Gasoline fuel host 50.00/ft
nitro fuel host 70.00 /ft
Fueltank for nitro and gas 1000CC 190x95x77(mm) Sold out
fuel tank for nitro and gas 500cc 450.00
http://www.cyclonetoy.com/list_1.asp?id=1216
Heavy duty servo cable 300mm 100.00 ea.
Heavy duty servo cable 600mm 150.00 ea.
Hinges 500.00 set (20pcs)
T plug connector 3 pcs set male and female 150.00
Program card 450.00
http://www.cyclonetoy.com/list_1.asp?id=122
Telemetry Combo Pack 2,800,000
Key Features
* Monitors temperature to maximize performance and eliminate costly rebuilds
* Battery voltage display prevents runaway crashes
* RPM display shows top-end speed
* Quality of signal monitors RF link strength
* Lap Counter/Timer helps analyze results of performance tweaks
Heat shrinkable tube for battery
size 4"x19" 140.00
2.5"x19" 110.00
prop adapter free shipping
size 5mm shaft 650.00
4mm shaft 530.00
3.17mm shaft 530.00
Pull-Pull system for giant scale 1 set 650.00 free shipping
Nitro spinner
size 2" 250.00 each
prop. nut spinner
3/8" 450.00
World model La Racer 40 6k reprice to 5,000
MagichandRC Yak 54 50cc airframe 15,000
30% YAK54 87in
Length: 1919mm(75.6in)
Wingspan: 2210mm (87in)
Wing area: 87.4dm2(1354sq in)
Engine 50-60cc gas
Weight: 7.3-7.7kg (16-17 lbs)
Radio: 4ch-6ch
09164306651
Last edited by westproof; 06-22-2010 at 05:19 PM.
06-22-2010, 05:24 PM
FS...
Futaba 2PL 2.4G Radio System
-Box and manual
-RX and TX
-Zero glitch
-Zero defect
-Test all you want
-Php 3900
Airflow
09162852677
StaMesa area
-Box and manual
-RX and TX
-Zero glitch
-Zero defect
-Test all you want
-Php 3900
Airflow
09162852677
StaMesa area
06-22-2010, 06:01 PM
LF: Name and Contact Number of ESC Repair Guy
Thanks sir Etivac! 
Last edited by Dongskie; 06-22-2010 at 07:27 PM.