Madda: Ok. Bfast on me next meet. Wala lang kasing oras last time.
Di din ako bilib na gagawin mo yun sa Tundra mo. Tinawagan ko na yun.
Cleaning time daw for his Tundra was longer than run time.

Msdelr: Next time, I'll have something that can keep up with your rig.

Robo: Malapit na yung truck. As shiny as the trailer. Bili na!

Factory48: Yes, an scx-10 is next. Ikaw na din. PM me your cel, need to talk to you regarding track.

Cox: Sama ka na din dito!

RCManila: Practice ka today? Laro ka bukas?

Nag swimming na yung Tundra? Loko din yung Gerald noh kung nagawa nya yun!

Truck head race?

Hindi eh...tinatamad ako today...bukas family day...I just have a bag full of excuses yaknow.

Cool! Konti lang kami pero enjoy.

JPRacing: Kayang-kaya yun, ako pa. Hehehe. Palinis natin sa car wash, tanggal lahat electronics tapos pressurized washer.

RCManila: Race na naman? Hayaan mo na TC mo for that. Plema!

@JP - sent you PM. Dami kong gustong bilhin: SCX10, AX10, RC8e, Savage Flux. Don't know which to get first. Cge na nga, sabay sabay na!

Update lang mga bossing
Problema isa lang recaro seat ko

Where did you buy the recaro seat? I've been looking for those. Can't find them anywhere.

Ganda niyan Edwin. Copper tubes ba gamit mo para sa light brace?? Astig tingnan eh.

Sir JP
3/16 at 1/8" brass tube sa may T Alonzo ako bumibili supplies ko madami dun. Pati yun mga thin brass plates nakakabili ng tingi or per kilo.

Sir Factory
Matagal na yun recaro seat/cellphone holder ko. Dati ang dami nyan sa Concord. Dapat pala 2 na binili ko

Scalers, im posting these rules as a guide. We'l not necessarily copy their rules. We can just use it as a guide if ever we'll come up with our own competition rules some day.
For those who are just starting, this can be helpful if ever you wish to prepare for our future scale competition.
Comments? i think di pwde magcompete ang stock hi-lift and scx10. I hope we can make a fair competition rules for all to enjoy

@JP & Factory 48 - mag SCX10 na kayo para you'll have a more capable scale rig. You can use your tamiya (hi-lift & CR01) bodies para true to scale parin yung body, just like what u guys have.

-Miker

COPIED FROM 2010 MSD scale nationals http://www.rccrawler.com/forum/showthread.php?t=220426

The goal of this event is to bring SCALE rigs. This is not a USRCCA pro comp. Please keep that in mind.

Street Class
• Description - An off-road vehicle that you would " DRIVE " on the street or to the trail head
• 115mm / 4.5" max tire size with a max rim size of 2.2"
• No wheelbase limit- wheelbase must 'fit' vehicle concept/body.
• 12 Minimum Scale Points Required to compete.
• No max track width. Gates will be a minimum of 11" wide so mind your track width, measure from inside cone to inside cone.
• You may modify any tire that is not on the banned list as long as it fits the CLASS that you intend to run it in. You may NOT combine two different style of tires to make one.
• You must run a complete body, including bumpers, fenders, doors & tailgates. Some fender trimming is allowed but the basic shape must be retained, Fenders may be cut, or flat fendered, but it must resemble a 1:1 rig you'd see on the street. If you remove the tailgate, you must have a complete floor and drop bed. If you want to remove your doors, you must run a full interior. "Iffy" Vehicles must be approved by the Scale Nationals Committee members.
• A shortened or lengthened body is allowable. A tubed bed must have a Functional bed area capable of carrying a full-size spare laid flat (rear fender and tailgate rules do not apply to tubed beds).
• No 4 wheel steer or rear steer at all ! If you have more than 2 axles, the FRONT axles are the ONLY ones that can steer.
• No MOA axles of any kind.
• No " DIG " of any kind is allowed.
• Single engine rigs only.
• Wheelbase is limited only by your body, and must fit in your fender wells.
• Vehicle must have a frame-railed chassis. Tubed frame rails are ok.
• Vehicle battery must be mounted on the chassis. You CANNOT mount the battery ON the steering servo/axle/upper links. The goal is to place the battery where it is not visible for a more scale appearance.
• You may add weight to your wheels, but you are only allowed a maximum of 12 TOTAL oz's. You can put it in whichever wheels you want, but 12 oz is the total. Weight can only be added internally, no external wheel weight is allowed.
• You may only run 1 truck in each class, you Cannot run the same truck in both classes, each driver is allowed one entry. You may NOT share rigs with other drivers.
If you feel your rig is borderline, be prepared to modify it if it does not pass tech inspection. AND/ OR bring a BACKUP rig just in case.

Trail Class
• Description - An off-road vehicle that you would " TRAILER " to the trail head
• 140mm / 5.5" max tire size with a max rim size of 2.2"
• No wheelbase maximum- wheelbase must 'fit' truck concept/body.
• 15 Minimum Scale Points Required to compete.
• No max track width. Gates will be a minimum of 12" wide so mind your track width, measure from inside cone to inside cone.
• You may modify any tire that is NOT on the banned list as long as it fits the CLASS that you intend to run it in. You may NOT combine two different style of tires to make one.
• You must run a complete body, including bumpers, fenders, doors & tailgates. Some fender trimming is allowed but the basic shape must be retained, Fenders may be cut, or flat fendered, but it must resemble a 1:1 rig you'd see on the trail. If you remove the tailgate, you must have a complete floor and drop bed. If you want to remove your doors, you must run a full interior. "Iffy" Vehicles must be approved by the Scale Nationals Committee members.
• A shortened or lengthened body is allowable. A tubed bed must have a functional bed area capable of carrying a full-size spare laid flat (rear fender and tailgate rules do not apply to tubed beds).
• No 4 wheel steer or rear steer at all ! If you have more than 2 axles, the FRONT axles are the ONLY ones that can steer.
• No MOA axles of any kind.
• No " DIG " of any kind is allowed.
• Single engine rigs only.
• Wheelbase is limited only by your body, and must fit in your fender wells.
• Vehicle must have a frame-railed chassis. Tubed frame rails are ok.
• Vehicle battery must be mounted on the chassis. You CANNOT mount the battery ON the steering servo/axle/upper links. The goal is to place the battery where it is not visible for a more scale appearance.
• You may add weight to your wheels, but you are only allowed a maximum of 12 TOTAL oz's. You can put it in whichever wheels you want, but 12 oz is the total. Weight can only be added internally, no external wheel weight is allowed.
• You may only run 1 truck in each class, you Cannot run the same truck in both classes, each driver is allowed one entry. You may NOT share rigs with other drivers.
If you feel your rig is borderline, be prepared to modify it if it does not pass tech inspection. AND/ OR bring a BACKUP rig just incase.
• Not all 140mm / 5.5" tires will be allowed. Please see ban list below;

Boss Madda and Boss JP:

Magtatanong lang po, anong truck ang okay? Big rig ba o 3 speed? Also anong radio - wala kasi akong alam sa 4 channel

TIA!

Pare, I'm assuming you mean big rig or highlift pick up. Big rig, only on asphalt, cement, living room. No trail running. Pero, ganda talaga tingnan.
High lift, stock, pwede trail running. Upgrade suspension, pwede na din crawling.

Thanks JP!

Hmmm. Ok, thanks for that - sige, research pa ako Will consult you gurus again soon.

my, my, jp......what big rig you have......this is my favorite, ...tanker.
better stock it up with cosmic fuel, hehehe.....nice.

my favorite race director Papa Hec!!
Walang kabalbalan pwede pag si Papa Hec ang nagpapatakbo ng karera!!
Thanks Hec.
Antay ka lang sa truck na hihila niyan.

yup, heard from the grapevine that it will be the best looking hauler, EVER,
all the way from n.a. .........envy.